Replaces the asset subsystem's spritesheet generator with a rust-based
implementation (https://github.com/tgstation/rust-g/pull/160).
This is a rough port of
https://github.com/BeeStation/BeeStation-Hornet/pull/10404, but it
includes fixes for some cases I didn't catch that apply on TG.
(FWIW we've been using this system on prod for over a year and
encountered no major issues.)
`/datum/asset/spritesheet_batched`: A version of the spritesheet system
that collects a list of `/datum/universal_icon`s and sends them off to
rustg asynchronously, and the generation also runs on another thread, so
the game doesn't block during realize_spritesheet. The rust generation
is about 10x faster when it comes to actual icon generation, but the
biggest perk of the batched spritesheets is the caching system.
This PR notably does not convert a few things to the new spritesheet
generator.
- Species and antagonist icons in the preferences view because they use
getFlatIcon ~~which can't be converted to universal icons~~.
- Yes, this is still a *massive* cost to init, unfortunately. On Bee, I
actually enabled the 'legacy' cache on prod and development, which you
can see in my PR. That's why I added the 'clear cache' verb and the
`unregister()` procs, because it can force a regeneration at runtime. I
decided not to port this, since I think it would be detrimental to the
large amount of contributors here.
- It is *technically* possible to port parts of this to the uni_icon
system by making a uni_icon version of getFlatIcon. However, some
overlays use runtime-generated icons which are ~~completely unparseable
to IconForge, since they're stored in the RSC and don't exist as files
anywhere~~. This is most noticeable with things like hair (which blend
additively with the hair mask on the server, thus making them invisible
to `get_flat_uni_icon`). It also doesn't help that species and antag
icons will still need to generate a bunch of dummies and delete them to
even verify cache validity.
- It is actually possible to write the RSC icons to the filesystem
(using fcopy) and reference them in IconForge. However, I'm going to
wait on doing this until I port my GAGS implementation because it
requires GAGS to exist on the filesystem as well.
IconForge generates a cache based on the set of icons used, all
transform operations applied, and the source DMIs of each icon used
within the spritesheet. It can compare the hashes and invalidate the
cache automatically if any of these change. This means we can enable
caching on development, and have absolutely no downsides, because if
anything changes, the cache invalidates itself.
The caching has a mean cost of ~5ms and saves a lot of time compared to
generating the spritesheet, even with rust's faster generation. The main
downside is that the cache still requires building the list of icons and
their transforms, then json encoding it to send to rustg.
Here's an abbreviated example of a cache JSON. All of these need to
match for the cache to be valid. `input_hash` contains the transform
definitions for all the sprites in the spritesheet, so if the input to
iconforge changes, that hash catches it. The `sizes` and `sprites` are
loaded into DM.
```json
{
"input_hash": "99f1bc67d590e000",
"dmi_hashes": {
"icons/ui/achievements/achievements.dmi": "771200c75da11c62"
},
"sizes": [
"76x76"
],
"sprites": {
"achievement-rustascend": {
"size_id": "76x76",
"position": 1
}
},
"rustg_version": "3.6.0",
"dm_version": 1
}
```
Universal icons are just a collection of DMI, Icon State, and any icon
transformation procs you apply (blends, crops, scales). They can be
convered to DM icons via `to_icon()`. I've included an implementation of
GAGS that produces universal icons, allowing GAGS items to be converted
into them. IconForge can read universal icons and add them to
spritesheets. It's basically just a wrapper that reimplements BYOND icon
procs.
Converts some uses of md5asfile within legacy spritesheets to use
rustg_hash_file instead, improving the performance of their generation.
Fixes lizard body markings not showing in previews, and re-adds eyes to
the ethereal color preview. This is a side effect of IconForge having
*much* better error handling than DM icon procs. Invalid stuff that gets
passed around will error instead of silently doing nothing.
Changes the CSS used in legacy spritesheet generation to split
`background: url(...) no-repeat` into separate props. This is necessary
for WebView2, as IE treats these properties differently - adding
`background-color` to an icon object (as seen in the R&D console) won't
work if you don't split these out.
Deletes unused spritesheets and their associated icons (condiments
spritesheet, old PDA spritesheet)
If you press "Character Setup", the 10-13sec of lag is now approximately
0.5-2 seconds.
Tracy profile showing the time spent on get_asset_datum. I pressed the
preferences button during init on both branches. Do note that this was
ran with a smart cache HIT, so no generation occurred.
Much lower worst-case for /datum/asset/New (which includes
`create_spritesheets()` and `register()`)
Here's a look at the internal costs from rustg - as you can see
`generate_spritesheet()` is very fast:
**Before**
**After**
🆑
fix: Fixed lizard body markings and ethereal feature previews in the
preference menu missing some overlays.
refactor: Optimized spritesheet asset generation greatly using rustg
IconForge, greatly reducing post-initialization lag as well as reducing
init times and saving server computation.
config: Added 'smart' asset caching, for batched rustg IconForge
spritesheets. It is persistent and suitable for use on local, with
automatic invalidation.
add: Added admin verbs - Debug -> Clear Smart/Legacy Asset Cache for
spritesheets.
fix: Fixed R&D console icons breaking on WebView2/516
/🆑
* Multi-tile airlock assemblies/pathing [NO GBP] (#77537)
## About The Pull Request
Small fixes after https://github.com/tgstation/tgstation/pull/76732
- Creates base large subtype for mapping
- Door assembly naming consistent with other airlocks
- Base subtype large airlock no longer spawns in a normal sized airlock
- Renames station2 subtype to public for consistency
## Changelog
🆑 LT3
fix: Base large airlock subtype no longer spawns a normal sized airlock
image: Added mapping icons for large airlocks
code: Repathed all public airlocks to consistent naming
/🆑
* Multi-tile airlock assemblies/pathing [NO GBP]
* maps
* Merge remote-tracking branch 'upstream/master' into upstream-merge-77537
---------
Co-authored-by: lessthanthree <83487515+lessthnthree@users.noreply.github.com>
makes the rcd able to make girders (#76515)
## About The Pull Request
rcd can make girders at half the cost of making a wall in 1.3 seconds
## Why It's Good For The Game
more "rapid" than using iron for girders and putting whatever material
on it
## Changelog
🆑
add: rcd can make girders now
/🆑
Co-authored-by: jimmyl <70376633+mc-oofert@users.noreply.github.com>
* Icon folder cleaning wave one
* Fixe a merge conflict
* Fixes some more merge conflicts
* Fixes some modular icon paths
* Fixes even more modular icon paths...
Hopefully that's the last of them
* Fixes some merge discrepencies
* More merge issues
* ok
* not ok
---------
Co-authored-by: YesterdaysPromise <122572637+YesterdaysPromise@users.noreply.github.com>
Co-authored-by: Giz <vinylspiders@gmail.com>
Some more RCD Designs & Patches (#72757)
Adds some more stuff you can build with the RCD
1. Under structures you can now build/deconstruct catwalks & construct
Reflector Frames. Destorying a catwalk will cut any cable on it leaving
pieces of it behind
2. If you have the frames upgrade you can construct APC, Air Alarm &
Fire Alarm frames on walls & Flood light fixtures[fully wired]. It only
creates the wall mount and sticks it on the wall. Wiring, Circuits and
finishing the frame is still your job
3. If you have the furnishing upgrade you can create racks & beds &
additional bar stool
**Important Code Refractors**
1. `/turf/closed/wall/proc/try_wallmount()` will return true only after
you have successfully mounted the wallframe or stuck an poster on it &
not simply check if you are trying to mount a valid thing on it
2. `apc_tool_act/rcd_act()` was incorrectly checking passed_mode for the
simple circuit upgrade and not the `the_rcd.upgrade `flag. Thats fixed
now to
3. newly created APC's weren't assigning themselves to their areas
allowing multiple to be created in one area. Thats fixed now
4. Walls, Airlocks & other stuff could be built on tiles having
something dense that would block it. For example a wall could be build
on top of a machine frame!!. Thats also fixed now
More stuff you can build rapidly with the RCD
🆑
add: more designs for the rcd
refactor:` try_wallmount()` to return true only after successful mount
fix: `apc_tool_act/rcd_act()` incorrecly checking for simple circuits
upgrade in the wrong variable
fix: newly created APC's not assigning themselves to their areas.
fix: rcd building structures [walls, airlocks etc] on turf's that
already have structures on them
/🆑
Co-authored-by: SyncIt21 <110812394+SyncIt21@users.noreply.github.com>
itsmeow
