* Saycode refactor, unit tests, and fixes
* parrot
* SR tweaks
* say tests from pstream/71873
Co-authored-by: Tim <timothymtorres@gmail.com>
Co-authored-by: tastyfish <crazychris32@gmail.com>
* Changes reagentscanner circuit component to use Table (#69745)
Changes components\atom\reagentscanner to use table list from Assoc list.
Added purity output to components\atom\reagentscanner.
At time of making this its impossible to iterate through the output of reagentscanner via loops or numerical index and to determine the amount or the reagent scanned you needed to know its associated value which is less than idea.
Queried this issue on coderbus meeting 3 then asked Watermelon and he agreed that a change would be good.
Added a "purity" to the table outputs to make shells of this component "desirable" to chemistry who need to use Ph_meter to check exact purity. If this not allowed I’m willing to make an \atom\reagentscanner\adv variant that will comparable to Ph_meter.
I intend to give the same treatment to materialscanner.
* Changes reagentscanner circuit component to use Table
Co-authored-by: Dmeto <75919495+Dmeto@users.noreply.github.com>
* Reagents scanner circuit component (#62704)
It allows people to make circuits objects that interface with reagents.
* Reagents scanner circuit component
Co-authored-by: Ghom <42542238+Ghommie@users.noreply.github.com>
* Made admin circuits more abstract, they no longer end up in the contents of the shell. (#62630)
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
* Made admin circuits more abstract, they no longer end up in the contents of the shell.
Co-authored-by: Watermelon914 <37270891+Watermelon914@users.noreply.github.com>
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
* Integrated the component printer into the integrated circuit UI. You can now link integrated circuits to component printers (#62287)
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
* Integrated the component printer into the integrated circuit UI. You can now link integrated circuits to component printers
Co-authored-by: Watermelon914 <37270891+Watermelon914@users.noreply.github.com>
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
* Adds the "speaker name" port to the voice activator circuit component (#61602)
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
* Adds the "speaker name" port to the voice activator circuit component
Co-authored-by: Watermelon914 <37270891+Watermelon914@users.noreply.github.com>
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
* Refactors how components are triggered and refactors how ports are ordered (#60934)
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
* Refactors how components are triggered and refactors how ports are ordered
Co-authored-by: Watermelon914 <37270891+Watermelon914@users.noreply.github.com>
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
* Input ports now connect to multiple output ports. Remove combiner. (#60494)
* tgui bsod
* debug disconnections
* prelim
* recomment
* set_value -> put ._.
* DAMN IT
* reinsert subsystem
* prepare
* unditch signals
* remove combiner
* remove combiner some more
* how did router.dm get here? deleting.
* These two COMSIGS should be one.
* critical typo
* inline cast
* have your signals
* Have your set_input & set_output.
* make compile
* upgrade save/load to n-to-n-wires
* have your documentation
* have your unsafe proc
* pay no attention to the compile errors
* unlist the ref
* paste my for block back in ._.
* fix manual input
* oops pushed too soon
* Have your !port.connected_to?.length
Co-authored-by: Watermelon914 <37270891+Watermelon914@ users.noreply.github.com>
Co-authored-by: Watermelon914 <37270891+Watermelon914@ users.noreply.github.com>
* Input ports now connect to multiple output ports. Remove combiner.
Co-authored-by: Gurkenglas <gurkenglas@hotmail.de>
Co-authored-by: Watermelon914 <37270891+Watermelon914@ users.noreply.github.com>
* Circuit component descriptions and module names are now visible to the naked eye. (#60545)
* Circuit component descriptions and module names are now visible to the naked eye.
Co-authored-by: Gurkenglas <gurkenglas@hotmail.de>
* Added circuit component UI details, added multiplexer and allowed inserting components directly into shells. (#59635)
Adds the multiplexer circuit component - en.wikipedia.org/wiki/Multiplexer
Circuit components can now be directly inserted into shells rather than having to take the integrated circuit out.
Special information can be accessed from components now through the "Info" button besides the eject button on a component.
* Added circuit component UI details, added multiplexer and allowed inserting components directly into shells.
Co-authored-by: Watermelon914 <37270891+Watermelon914@users.noreply.github.com>
