Implements the Modernizing radiation design document ( https://hackmd.io/@tgstation/rJNIyeBHt ) and replaces the current radiation sources with the new system, as well as replacing/removing a bunch of old consumers of radiation that either had no reason to exist, or could be replaced by something else.
Diverges from the doc in that items radiation don't go up like explained. I was going to, but items get irradiated so easily that it just feels pretty lame. Items still get irradiated, but it's mostly just so that radiation sources look cooler (wow, lots of stuff around going green), and for things like the geiger counter.
Instead of the complicated radiation_wave system, radiation now just checks everything between the radiation source and the potential target, losing power along the way based on the radiation insulation of whats in between. If this reaches too low a point (specified by radiation_pulse consumers), then the radiation will not pass. Otherwise, will roll a chance to irradiate. Uranium structures allow a delay before irradiating, so stay away!
* Energy collection: Mass rework
Radiation Collectors and Tesla Coils are now subtyles of a common
energy_accumulator type. This type combines common code such as smoothing
output over energy received, computing power output, and handling wire
connections.
Inline calculations using machine energy units are now performed by
common math functions in maths.dm. Rather than reference 0.1,
1 SECONDS is used to make it clear this is to calculate to and from
tickrate dependent units.
Constants which are written in terms of tickrate dependent units are now
written in terms of joules, and use these helpers to convert to and from
these units. With SSmachines.wait / (1 SECONDS) being 2, this usually
means doubling the values of constants which were previously defined in
terms of machine energy units.
* Energy collection: Map path update
> git ls-files | grep dmm | xargs sed -i 's1rad_collector1energy_accumulator/&1g'
> git ls-files | grep dmm | xargs sed -i 's1tesla_coil1energy_accumulator/&1g'
> git ls-files | grep dmm | xargs sed -i 's1grounding_rod1energy_accumulator/&1g'
major cleanup of modules/atmospherics folder and all related files, still many missing
-cleanup of procs name
-cleanup of vars name
-documentation of some of the procs
-minor changes to some for() logic (no in game changes just early continue or as anything checks)
No in game changes, only code and docs
bring code up to latest standards, move many procs to named files inside _HELPERS
no idea where to put some of these procs, help is appreciated
made more files to contain some unique code, deleted unsorted.dm, we can rest now
What does the PR do
This reworks how our rendering is handled, specifically moves away from plane masters as the end solution:
Instead we replace plane masters rendering directly to client with planes that render multiple planes onto them as objects in order to be able to affect multiple planes while treating them as a single object. This is done by relaying the plane using a "render relay" onto a "render plate" which acts as a plane master of plane masters of sorts, and since planes are rendered onto it as single objects any filters we apply to them will render over the planes, treating them as a single unit
image
Also cleaned up unused plane masters and render targets to reduce clutter, as well as removing a useless filter that was resulting from confusion due to said clutter.
Clientside performance testing showed no significant change, no effect on serverside performance as this is clientside.
Also added the blackness plane master so it can be relayed, side effect is that it can now be used to adjust how blackness is rendered
P2 should introduce rendering one plane to multiple render_plates, but i want to get this done before I finish that, though testing shows its feasible
Why It's Good For The Game
Allows more advanced effects.
As an example i made a grav anomaly effect in like 30 seconds for this video i will improve it once im awake properly:
https://streamable.com/lu98dz
Documentation images should be merged here after this pr is done
tgstation/documentation-assets#2
Changelog
cl
qol: grav anomalies now have a pretty effect
refactor: Rendering has been refactored, remember to report bugs
/cl
## About The Pull Request
stop forgetting to include mapload, if you don't include it then every single subtype past it by default doesn't include it
for example, `obj/item` didn't include mapload so every single item by default didn't fill in mapload
## Regex used:
procs without args, not even regex
`/Initialize()`
procs with args
`\/Initialize\((?!mapload)((.)*\w)?`
cleanup of things i didn't want to mapload:
`\/datum\/(.)*\/Initialize\(mapload`
Someone forgot to add GLOB.cult_narsie so I think what would happen is, despite narsie being dead, the shuttle wouldn't leave.
Was a non issue because the round ends if nar nar is last minute killed. There is not enough time for the shuttle to even leave.
That said, unimportant failures are still failures, so let's get going
original pr here: #59789 (Closed because he didn't think it was good enough)
came back to this because i realized that
all machines were area sensitive, meaning they had a list with at least a reference to themselves (assuming they arent in the contents of another movable which most arent) for the purposes of handling power differences when their area changes
pipes are machines
there are ~14k machines and ~6k pipes
i made this problem worse with a recent pr by making it a nested list
so i needed to track what machines needed power, and this pr had work already done that could be used for that purpose. now machines that have use_power == NO_POWER_USE do not have this extra memory overhead for no reason
currently every machine that uses power draws that amount from its area from a dynamic channel via auto_use_power() which is called every SSmachines fire(), then in apc/process() the area's dynamic power draw is reset and the power is used. with static power its not calculated then reset every loop, its just taken from the grid. so now machines handle updating their static power usage from their current area (this doesnt touch power machines that require a wire connection). in order to allow this, use_power, idle_power_usage, and active_power_usage have setters to track state correctly and update the static power usage on the machines current area and handle area sensitivity.
also goes through a lot of heavy abusers of SSmachine processing time and tries to make it faster. makes airalarm/process() into a signal handler for COMSIG_TURF_EXPOSE since air alarms only need to process for changes.
Why It's Good For The Game
SSmachines isnt the heaviest hitter in terms of total cpu and certainly not in terms of overtime, but its not a lightweight. it frequently takes > 50ms to complete a run and seems to be in the top 5 or so of subsystem costs looking at some round profilers
also gets rid of a few thousand lists since every pipe no longer has two useless lists each (and any other machines that dont use power)
Love ya kyler
Co-authored-by: Rohesie <rohesie@gmail.com>
Stops singularity objects from being added to the global singularity list,
this list is only for singularity components.
This fixes singularity beacons breaking because they expect that only
singularity components are in the global singularity list.
* Makes turfs persist signals
* Splits connect_loc up into two elements, one for stuff that wishes to connect on behalf of something, and one for stuff that just wants to connect normally. Connecting on behalf of someone has a significant amount of overhead, so let's do this to keep things clear
* Converts all uses of connect_loc over to the new patterns
* Adds some comments, actually makes turfs persist signals
* There's no need to detach connect loc anymore, since all it does is unregister signals. Unregisters a signal from formorly decal'd turfs, and makes the changeturf signal persistance stuff actually work
* bro fuck documentation
* Changes from a var to a proc, prevents admemems and idiots
* Extra detail on why we do the copy post qdel
Converts most spans into span procs. Mostly used regex for this and sorted out any compile time errors afterwards so there could be some bugs.
Was initially going to do defines, but ninja said to make it into a proc, and if there's any overhead, they can easily be changed to defines.
Makes it easier to control the formatting and prevents typos when creating spans as it'll runtime if you misspell instead of silently failing.
Reduces the code you need to write when writing spans, as you don't need to close the span as that's automatically handled by the proc.
(Note from Lemon: This should be converted to defines once we update the minimum version to 514. Didn't do it now because byond pain and such)
* Makes tanks only process when needed, rather then doing it constantly
* Makes portable atmos machines only process when needed, makes adding and removing atmos machinery cheaper, makes the tank processing logic actually work properly
* Makes pipelines only react() when their mix changes, fixes a ton of misuses of update_parents that were causing about 10ms of load for atmos just from reconcile_air()
* Adds in a new reaction framework alongside the old one for profiling related reasons
* whoops
* Cleanup, removes the react profiling code, I've chosen a direction to go here
* Cleans up some code, adds comments describing how to interact with portable atmos machines/tanks and their
mixes, adds a blurb to Atmospherics.md about the topic as a whole, leaves a line of bread for someone to follow
if I get hit by a bus in 2 days (Knock on wood)
* Removes priority from reactions, moves priority groups to the defines file
* whoops
* Converts air_contents to _air_contents, replaces all the out of file things that used it with return_air()
* Replaces the canister air contents uses, converts it back to air_contents, I decided I didn't like the _
* Fixes
* Adds explosion SFX to the blastcannon and explosive compressor
- Extracts the explosion SFX and screenshake proc from the SSexplosions explosion handling proc and lets the explosive compressor and blastcannon use it.
* Miscellaneous changes
- Adds defines for the internal explosion arglist keys
- Reverses the values of the explosion severity defines
- Changes almost everything that uses `/proc/explosion` to use named arguments
- Removes a whole bunch of argname = 0 in explosion calls.
* Removes named callback arguments.
* Changes the explosion signals to just use the arguments list
Adds a simple framework to let objects respond to explosions occurring inside of them.
Changes a whole bunch of explosions to use the object being exploded as the origin of the explosion rather than the turf the object is on.
Makes the explosive compressor and blastcannon actually use the TTVs they are given.
Adds support for things responding to internal explosions.
Less snowflake code for the explosive compressor and blastcannon calculating bomb range.*
Less confusing explosion severity defines.
Less opaque explosion arguments
*does not guarantee that the solution to letting them actually use the TTV is any less snowflake.
Removes all /datum/game_mode except dynamic. Eventually, all of mode and game_mode will be removed, and Dynamic will become an ingrained system. Every single other gamemode was unmaintained at best and poisoned other code at worst. Currently all tg servers run 24/7 Dynamic, so the time to act is now.
* Remove gamemode references from age checks
* Monkey
* Remove heretics
* Remove BBs
* Refactor uplinks and remove clown ops
* Remove nuke ops
* Removes and refactors cult
* Remove extended
* Remove and move out meteors
* Removes wizard
* Remove sandbox
* Remove changelings
* Remove traitors
* Remove revs
* Remove gangs
* Remove changing mode and voting for new gamemodes
* get_candidates signature fix
* Summon ERT and NERD in their own panel
* Remove some old unneeded age_check stuff
* Fix old signatures of get_uplink_items
* Use Extended like config for dynamic.json
* Fix discounted gear
## About The Pull Request
Changes up some layer and plane defines for no particular reason lol
## Why It's Good For The Game
Planes actually override layers, and layers control ordering within planes. A lot of the usage of plane and layer was wholly unnecessary. This refactor helps future maintainability while also being needed staging for _future features._
Clears out two deprecated explosions systems (explosion ids and explosion levels)
Refactors a bunch of contents_explosions procs to be maybe slightly faster.
Cleans up a bunch of ex_act code.
Slightly cleaner code
A few less unused vars on /atom and /turf
Creates update_name and update_desc
Creates the wrapper proc update_appearance to batch update_name, update_desc, and update_icon together
Less non-icon handling code in update_icon and friends
Signal hooks for things that want to change names and descriptions
99%+ of the changes in this are just from switching everything over to update_appearance from update_icon
Converts many proc overrides to properly use list/modifiers, fixes some spots where modifiers should have been passed, calls modifiers what it is, a lazy list, and cleans up some improper arg names like L, M, C, and N. Oh and I think there was a spot where someone was trying to pass M.name in as a string, but forgot to wrap it in []. I fixed that too.
Done using this command sed -Ei 's/(\s*\S+)\s*\t+/\1 /g' code/**/*.dm
We have countless examples in the codebase with this style gone wrong, and defines and such being on hideously different levels of indentation. Fixing this to keep the alignment involves tainting the blames of code your PR doesn't need to be touching at all. And ultimately, it's hideous.
There are some files that this sed makes uglier. I can fix these when they are pointed out, but I believe this is ultimately for the greater good of readability. I'm more concerned with if any strings relied on this.
Hi codeowners!
Co-authored-by: Jared-Fogle <35135081+Jared-Fogle@users.noreply.github.com>
Speeds up gas movement significantly
Documents the intent and finer details of the atmos system (Thanks dunc)
Fixes excited groups constantly rebuilding, this broke 4 years ago
Fixes superconductors just straight up not working
Allows turfs to sleep while inside an excited group
Adds a new subprocess to SSAir to support rebuilding in this state
Most heat based behavior no longer relies on being inside a fire
Adds a new element to support doing this cleanly
Adds a new subprocess to SSAir to support doing this while a turf is asleep
Refactors air_update_turf to allow for finer control
Makes apcs take damage in heat to prevent infinite plasma fire diffs
Cleans up immutable gas mixtures to make them work properly when the mix has gas in it
Planetary turfs no longer create a new copy of themselves each time they process. We instead use a global
immutable mix
Cleans up a typed for loop in reactions
Canisters will take damage from outside heat now
Speeds up excited group dismantle
Increases the superconductor threshold by 200k
Cleans up some roundstart ATs on some ruins
Uses /turf/open/var/excited to track if a turf is actively processing, preventing a |=
Prevents openspace from trying to melt
Tweaks a canister examine line
Makes planetary turfs reset to base when broken down as part of an excited group
Makes it impossible for planetary turfs to rebuild, just like space tiles
Fixes closed turfs not activating their replacement when destroyed by moving closed -> open turf activation to
the adjacent air subsystem. They were activating and then going back to sleep before adjacent air got a chance
to tick.
Fire alarms will trigger when the area gets too cold for humans
About The Pull Request
Converts singularity's dissipation code to use delta time instead of assuming it'll always be the same.
Numbers were based on the previous code given a delta_time of 2.
Replaces GLOB.poi_list |= src and GLOB.poi_list -= src with an element that handles it directly.
More consistent code, especially when a lot of code couldn't decide how to add/remove (some |=, some -=, some .Remove, etc).
