* [MDB Ignore][Bounty][Complete Refactor] Papercode Redux: Too Many Damn Files <Map Conflict Edition>
* Fixes merge conflicts and compilation errors, alongside fixing the joker card to make it fully functional again
* Fixed a bunch of info variables in map files
* Alright this is why I wanted this merged yesterday
Co-authored-by: Timberpoes <silent_insomnia_pp@hotmail.co.uk>
Co-authored-by: GoldenAlpharex <jerego1234@hotmail.com>
* Refactored fundamental circuit components that have varying inputs. Improvements to the integrated circuit UI. Improves and rebalances the drone shell (#68586)
* Refactored fundamental circuit components that have varying inputs. Made the integrated circuit UI slightly better.
* Fixes with UI
* Removes logger
* Ran prettier
* Fixed documentation
* Rebalances drone circuit
* Drones can now charge in chargers
Co-authored-by: Watermelon914 <hidden@ hidden.com>
* Refactored fundamental circuit components that have varying inputs. Improvements to the integrated circuit UI. Improves and rebalances the drone shell
Co-authored-by: Watermelon914 <37270891+Watermelon914@users.noreply.github.com>
Co-authored-by: Watermelon914 <hidden@ hidden.com>
* Drastically improved the USB connection for air alarms. Any airlock can now be made into a shell (#68632)
The USB connections for air alarms have been improved and now include scrubber control, vent control and the setting of the air alarm mode. Also fixes a bug where the limits were not being properly set.
The scrubber, vent and limit control can be duplicated in the circuit to allow multiple limits/scrubbers/vents to be controlled by one circuit.
Any airlock can be made into a shell during construction by configuring the airlock electronic before insert.
* Drastically improved the USB connection for air alarms. Any airlock can now be made into a shell
Co-authored-by: Watermelon914 <37270891+Watermelon914@users.noreply.github.com>
* Fixes some cases which references are used in trait sources, potentially causing hard deletes (#67974)
About The Pull Request
Fixes some cases in which actual references were used in trait sources instead of keys (or ref() keys).
This can cause some rare and difficult to find hard deletes.
Trait sources should be a string key relating to the source of it, not an actual reference to what added it. References within trait sources are never handled in Destroy(), because it's not expected behavior, meaning it can cause hanging references.
So, I went through with a regex to find some cases and replaced them.
I used the following and just picked through the few by hand to find erroneous ones.
ADD_TRAIT\(.+, .+, [a-z]+\)
REMOVE_TRAIT_TRAIT\(.+, .+, [a-z]+\)
Why It's Good For The Game
Less hard deletes, probably.
Changelog
cl Melbert
code: Some traits which mistakenly were sourced from a hard reference are no longer.
/cl
* Fixes some cases which references are used in trait sources, potentially causing hard deletes
* wew
Co-authored-by: MrMelbert <51863163+MrMelbert@users.noreply.github.com>
Co-authored-by: Gandalf <9026500+Gandalf2k15@users.noreply.github.com>
* Allows shells that requiring anchoring to take power from APCs (#62907)
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
* Allows shells that requiring anchoring to take power from APCs
Co-authored-by: Watermelon914 <37270891+Watermelon914@users.noreply.github.com>
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
* Made admin circuits more abstract, they no longer end up in the contents of the shell. (#62630)
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
* Made admin circuits more abstract, they no longer end up in the contents of the shell.
Co-authored-by: Watermelon914 <37270891+Watermelon914@users.noreply.github.com>
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
* Integrated the component printer into the integrated circuit UI. You can now link integrated circuits to component printers (#62287)
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
* Integrated the component printer into the integrated circuit UI. You can now link integrated circuits to component printers
Co-authored-by: Watermelon914 <37270891+Watermelon914@users.noreply.github.com>
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
* Printer Circuit Component (#62012)
I'm adding a circuit component that can print text string on a paper object in a variety of colors and font typefaces (currently only web-safe ones are available, maybe i'll add some fancy ones in the future but they'd need to be imported either through @ import of @ font-face in a separate CSS not imported by every tgui UI).
It's important to note that because the UI sanitizes new text inputed by users and not what's already written on the paper (so the pen_color and pen_font don't be purged in the process), we can't safely have these strings "printed" into the info variable directly, because of that these values will be stored in two new list variables, one for the text and one for font color, face and the signature. When the paper sheet UI is opened, these will be sanitized and then parsed into the text, so the next time the paper is edited we can clear these two lists.
Obviously better than a hacky byond proc - parsemarkdown() is outdated af -, albeit a bit messy... like the rest of paper code.
Requires #62033.
* Printer Circuit Component
Co-authored-by: Ghom <42542238+Ghommie@users.noreply.github.com>
* Adds the CIRCUIT_FLAG_REFUSE_MODULE circuit flag. (#62033)
Components like the MMI one can't be added to circuits more than once since they may register signals with same proctype and similar things which make for some tangled up race conditions if more than one is present.
Unfortunately this safety can be bypassed - with little gain alas, an MMI can't be inserted by attacking the component with it. it needs a shell - by using a module component. That's no good. So I'm adding a flag that can be used to stop certain components from being added to module components.
* Adds the CIRCUIT_FLAG_REFUSE_MODULE circuit flag.
Co-authored-by: Ghom <42542238+Ghommie@users.noreply.github.com>
* Refactors the list datatype to support composite lists. Adapts a lot of circuits to be able to properly use composite lists. Adds the dispenser shell (#61856)
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
Co-authored-by: Colovorat <35225170+Colovorat@ users.noreply.github.com>
* Refactors the list datatype to support composite lists. Adapts a lot of circuits to be able to properly use composite lists. Adds the dispenser shell
Co-authored-by: Watermelon914 <37270891+Watermelon914@users.noreply.github.com>
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
Co-authored-by: Colovorat <35225170+Colovorat@ users.noreply.github.com>
* Refactors how circuit size is calculated. Fixed module circuit size not taking up capacity equal to the amount of circuit components inside of it. (#61554)
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
* Refactors how circuit size is calculated. Fixed module circuit size not taking up capacity equal to the amount of circuit components inside of it.
Co-authored-by: Watermelon914 <37270891+Watermelon914@users.noreply.github.com>
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
* Adds buttons in the UI for specific components (#61622)
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
* Adds buttons in the integrated circuit UI for specific circuit components
Co-authored-by: Watermelon914 <37270891+Watermelon914@users.noreply.github.com>
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
* Adds the interrupt signal to the delay component, reorganises BCI files and circuit code improvements (#61393)
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
* Adds the interrupt signal to the delay component, reorganises BCI files and circuit code improvements
Co-authored-by: Watermelon914 <37270891+Watermelon914@users.noreply.github.com>
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
* Refactors how components are triggered and refactors how ports are ordered (#60934)
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
* Refactors how components are triggered and refactors how ports are ordered
Co-authored-by: Watermelon914 <37270891+Watermelon914@users.noreply.github.com>
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
* Moved all the integrated circuit core files into a new subfolder called core (#60787)
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
* Moved all the integrated circuit core files into a new subfolder called core
Co-authored-by: Watermelon914 <37270891+Watermelon914@users.noreply.github.com>
Co-authored-by: Watermelon914 <3052169-Watermelon914@ users.noreply.gitlab.com>
