Bubberstation/code/modules/admin/verbs/mapping.dm

//- Are all the floors with or without air, as they should be? (regular or airless)
//- Does the area have an APC?
//- Does the area have an Air Alarm?
//- Does the area have a Request Console?
//- Does the area have lights?
//- Does the area have a light switch?
//- Does the area have enough intercoms?
//- Does the area have enough security cameras? (Use the 'Camera Range Display' verb under Debug)
//- Is the area connected to the scrubbers air loop?
//- Is the area connected to the vent air loop? (vent pumps)
//- Is everything wired properly?
//- Does the area have a fire alarm and firedoors?
//- Do all pod doors work properly?
//- Are accesses set properly on doors, pod buttons, etc.
//- Are all items placed properly? (not below vents, scrubbers, tables)
//- Does the disposal system work properly from all the disposal units in this room and all the units, the pipes of which pass through this room?
//- Check for any misplaced or stacked piece of pipe (air and disposal)
//- Check for any misplaced or stacked piece of wire
//- Identify how hard it is to break into the area and where the weak points are
//- Check if the area has too much empty space. If so, make it smaller and replace the rest with maintenance tunnels.
var/intercom_range_display_status = 0

/obj/effect/debugging/marker
	icon = 'icons/turf/areas.dmi'
	icon_state = "yellow"

/obj/effect/debugging/marker/Move()
	return 0

/client/proc/do_not_use_these()
	set category = "Mapping"
	set name = "-None of these are for ingame use!!"

	..()

/client/proc/camera_view()
	set category = "Mapping"
	set name = "Camera Range Display"

	var/on = 0
	for(var/turf/T in world)
		if(T.maptext)
			on = 1
		T.maptext = null

	if(!on)
		var/list/seen = list()
		for(var/obj/machinery/camera/C in cameranet.cameras)
			for(var/turf/T in C.can_see())
				seen[T]++
		for(var/turf/T in seen)
			T.maptext = "[seen[T]]"
	feedback_add_details("admin_verb","mCRD") //If you are copy-pasting this, ensure the 2nd parameter is unique to the new proc!



/client/proc/sec_camera_report()
	set category = "Mapping"
	set name = "Camera Report"

	if(!master_controller)
		alert(usr,"Master_controller not found.","Sec Camera Report")
		return 0

	var/list/obj/machinery/camera/CL = list()

	for(var/obj/machinery/camera/C in cameranet.cameras)
		CL += C

	var/output = {"<B>CAMERA ANNOMALITIES REPORT</B><HR>
<B>The following annomalities have been detected. The ones in red need immediate attention: Some of those in black may be intentional.</B><BR><ul>"}

	for(var/obj/machinery/camera/C1 in CL)
		for(var/obj/machinery/camera/C2 in CL)
			if(C1 != C2)
				if(C1.c_tag == C2.c_tag)
					output += "<li><font color='red'>c_tag match for sec. cameras at \[[C1.x], [C1.y], [C1.z]\] ([C1.loc.loc]) and \[[C2.x], [C2.y], [C2.z]\] ([C2.loc.loc]) - c_tag is [C1.c_tag]</font></li>"
				if(C1.loc == C2.loc && C1.dir == C2.dir && C1.pixel_x == C2.pixel_x && C1.pixel_y == C2.pixel_y)
					output += "<li><font color='red'>FULLY overlapping sec. cameras at \[[C1.x], [C1.y], [C1.z]\] ([C1.loc.loc]) Networks: [C1.network] and [C2.network]</font></li>"
				if(C1.loc == C2.loc)
					output += "<li>overlapping sec. cameras at \[[C1.x], [C1.y], [C1.z]\] ([C1.loc.loc]) Networks: [C1.network] and [C2.network]</font></li>"
		var/turf/T = get_step(C1,turn(C1.dir,180))
		if(!T || !isturf(T) || !T.density )
			if(!(locate(/obj/structure/grille,T)))
				var/window_check = 0
				for(var/obj/structure/window/W in T)
					if (W.dir == turn(C1.dir,180) || W.dir in list(5,6,9,10) )
						window_check = 1
						break
				if(!window_check)
					output += "<li><font color='red'>Camera not connected to wall at \[[C1.x], [C1.y], [C1.z]\] ([C1.loc.loc]) Network: [C1.network]</color></li>"

	output += "</ul>"
	usr << browse(output,"window=airreport;size=1000x500")
	feedback_add_details("admin_verb","mCRP") //If you are copy-pasting this, ensure the 2nd parameter is unique to the new proc!

/client/proc/intercom_view()
	set category = "Mapping"
	set name = "Intercom Range Display"

	if(intercom_range_display_status)
		intercom_range_display_status = 0
	else
		intercom_range_display_status = 1

	for(var/obj/effect/debugging/marker/M in world)
		qdel(M)

	if(intercom_range_display_status)
		for(var/obj/item/device/radio/intercom/I in world)
			for(var/turf/T in orange(7,I))
				var/obj/effect/debugging/marker/F = new/obj/effect/debugging/marker(T)
				if (!(F in view(7,I.loc)))
					qdel(F)
	feedback_add_details("admin_verb","mIRD") //If you are copy-pasting this, ensure the 2nd parameter is unique to the new proc!

/client/proc/enable_debug_verbs()
	set category = "Debug"
	set name = "Debug verbs"

	if(!check_rights(R_DEBUG)) return

	src.verbs += /client/proc/do_not_use_these 			//-errorage
	src.verbs += /client/proc/camera_view 				//-errorage
	src.verbs += /client/proc/sec_camera_report 		//-errorage
	src.verbs += /client/proc/intercom_view 			//-errorage
	src.verbs += /client/proc/air_status //Air things
	src.verbs += /client/proc/Cell //More air things
	src.verbs += /client/proc/atmosscan //check plumbing
	src.verbs += /client/proc/powerdebug //check power
	src.verbs += /client/proc/count_objects_on_z_level
	src.verbs += /client/proc/count_objects_all
	src.verbs += /client/proc/cmd_assume_direct_control	//-errorage
	src.verbs += /client/proc/startSinglo
	src.verbs += /client/proc/fps	//allows you to set the ticklag.
	src.verbs += /client/proc/cmd_admin_grantfullaccess
	src.verbs += /client/proc/cmd_admin_areatest
	src.verbs += /client/proc/cmd_admin_rejuvenate
	src.verbs += /datum/admins/proc/show_traitor_panel
	src.verbs += /client/proc/print_jobban_old
	src.verbs += /client/proc/print_jobban_old_filter
	src.verbs += /client/proc/disable_communication
	src.verbs += /client/proc/print_pointers
	src.verbs += /client/proc/count_movable_instances
	src.verbs += /client/proc/cmd_display_del_log
	//src.verbs += /client/proc/cmd_admin_rejuvenate

	feedback_add_details("admin_verb","mDV") //If you are copy-pasting this, ensure the 2nd parameter is unique to the new proc!

/client/proc/count_movable_instances()
	set category = "Debug"
	set name = "Count Movable Instances"

	var/count = 0;

	// Apparently there's a BYOND limit on the number of instances for non-turfs.

	for(var/thing in world)
		if(isturf(thing))
			continue
		count++;
	usr << "There are [count]/[MAX_FLAG] instances of non-turfs in the world."


/client/proc/count_objects_on_z_level()
	set category = "Mapping"
	set name = "Count Objects On Level"
	var/level = input("Which z-level?","Level?") as text
	if(!level) return
	var/num_level = text2num(level)
	if(!num_level) return
	if(!isnum(num_level)) return

	var/type_text = input("Which type path?","Path?") as text
	if(!type_text) return
	var/type_path = text2path(type_text)
	if(!type_path) return

	var/count = 0

	var/list/atom/atom_list = list()

	for(var/atom/A in world)
		if(istype(A,type_path))
			var/atom/B = A
			while(!(isturf(B.loc)))
				if(B && B.loc)
					B = B.loc
				else
					break
			if(B)
				if(B.z == num_level)
					count++
					atom_list += A
	/*
	var/atom/temp_atom
	for(var/i = 0; i <= (atom_list.len/10); i++)
		var/line = ""
		for(var/j = 1; j <= 10; j++)
			if(i*10+j <= atom_list.len)
				temp_atom = atom_list[i*10+j]
				line += " no.[i+10+j]@\[[temp_atom.x], [temp_atom.y], [temp_atom.z]\]; "
		world << line*/

	world << "There are [count] objects of type [type_path] on z-level [num_level]"
	feedback_add_details("admin_verb","mOBJZ") //If you are copy-pasting this, ensure the 2nd parameter is unique to the new proc!

/client/proc/count_objects_all()
	set category = "Mapping"
	set name = "Count Objects All"

	var/type_text = input("Which type path?","") as text
	if(!type_text) return
	var/type_path = text2path(type_text)
	if(!type_path) return

	var/count = 0

	for(var/atom/A in world)
		if(istype(A,type_path))
			count++
	/*
	var/atom/temp_atom
	for(var/i = 0; i <= (atom_list.len/10); i++)
		var/line = ""
		for(var/j = 1; j <= 10; j++)
			if(i*10+j <= atom_list.len)
				temp_atom = atom_list[i*10+j]
				line += " no.[i+10+j]@\[[temp_atom.x], [temp_atom.y], [temp_atom.z]\]; "
		world << line*/

	world << "There are [count] objects of type [type_path] in the game world"
	feedback_add_details("admin_verb","mOBJ") //If you are copy-pasting this, ensure the 2nd parameter is unique to the new proc!


//This proc is intended to detect lag problems relating to communication procs
var/global/say_disabled = 0
/client/proc/disable_communication()
	set category = "Mapping"
	set name = "Disable all communication verbs"

	say_disabled = !say_disabled
	if(say_disabled)
		message_admins("[src.ckey] used 'Disable all communication verbs', killing all communication methods.")
	else
		message_admins("[src.ckey] used 'Disable all communication verbs', restoring all communication methods.")