* Refactors projectile Bump()
* Converts projectile_type var strings to paths
* Reorganizes bullet projectile paths
* Made a pass through all the bullet_act() definitions. Mainly ensured that damage_type is checked when dealing damage to certain objects. Removed stupid /turf bullet_act() override, replaced with on_hit() overrides on the relevant projectiles.
* Adds shotgun pellets projectile. Adds Raptor's shotgun slug sprite.
* Gives stunshots more of their own identity, refluffs them as taser cartridges for shotguns. They still aren't obtainable anywhere unless spawned.
* Makes projectiles pass through girders and cultgirders with a certain probability, unless the girder itself was clicked.
* Projectiles are also able to pass through grilles. Low damage projectiles have a chance to be blocked by grilles. High damage projectiles have a chance to have some damage absorbed by the grille.
* Makes projectiles for blanks invisible.
* Adds flash bullet types
* Adds support for 'penetrating' projectiles
* Swaps .45 and 9mm projectile types. .45s hit slightly harder, 9mils have more ammo capacity.
This should have little/no gameplay effect right now, just paving the
way for directional lights.
Replaced handle_rotation() on buckly things with this.
Signed-off-by: Mloc-Argent <colmohici@gmail.com>
Generalized all ninja power and gear code to work with new rig system.
Added shurikens, weapon mount, more work on deployable items.
Readded energy nets and energy blades.
Grenade launcher/charge stuff, interface stuff.
Renamed previously existing rigs to voidsuits, restructured rig and voidsuit files.
Refactored the energy net and teleportation proc.
Totally rewrote AI core/intellicard transfer procs.
Added rig sprites by Mordeth221, added step by steap suit sealing/inability to interfere with suit sealing process.
Updated map paths to use voidsuits.
Added chemical dispenser functionality, added power sink, added atom/drain_power() proc for later use.
Added rigsuit verbs, added voice changer.
Renamed MASKINTERNALS to AIRTIGHT, added internals checks for airtight helmets.
Added drain_power() procs to vulnerable machinery.
Reimplemented data theft.
Added suit maluses for losing your cell while wearing one.
Transitioned the rig suits to a back-mounted item that also controls a chestpiece.
Converted rig module to a storage item, convert ERT voidsuits to hardsuits.
New turf proc: assume_gas(). Maps to air.adjust_gas_temp().
Lots of optimizations to processing, fire, lighting, HasEntered() and
more.
Zones now process all fire data and existance in one go, fire objects
only handle spreading.
Most code has been ported straight so some of it mightn't be ideally
structured for the new gas_mixtures.
Signed-off-by: Mloc-Argent <colmohici@gmail.com>
- Complete rewrite of the chemsmoke spawning code (everything that happens after the reaction to create the smoke).
- Moved it into it's own file since it's a little longer than the old one code-wise.
- Tweaked the smoke sprites; gave chemsmoke directions for more randomization, and tweaked the timing of their animations so they are smooth now.
Most of the code is documented, so you should be able to follow what's going on just reading through it. In short though:
- Chemsmoke now affects a circular area with a variable range depending on the total amount of chemsmoke created (no more 1-of-each-ingredient smoke grenades - sorry).
- The carried reagent volume in the cloud balances itself according to how big the affected area is (larger area, less carried reagent per turf).
- The carried reagent has more volume the closer you are to the centre of the cloud.
- The visual smoke effect scales with how big the affected area is.
Fixes#3986
- Foam reagent inheritance fixed:
The trans_to() proc in Chemistry-Holder.dm was calling handle_reactions() every time it would add and remove reagents with add_reagent() and remove_reagent(). I've added a safety flag to both of these procs (and copy_to()) so that trans_to will not call handle_reactions() until it has added all the reagents to the target container. This allows foam to reliably take on the properties of other leftover reagents.
- Fixed a bug in effect_system.dm that wasn't applying reagents from foam to the environment.
- Tweaked smoke to apply reagent effects after it has stopped moving
This was causing huge reagent spam at the center of the smoke cloud as it was spawning, since they were being applied every time the cloud of smoke moved. Also changed it to apply the effects 2-3 times at longer intervals (2 seconds).
- Smoke also only effects tiles in a 3x3 grid now, rather than 5x5.
- Summary:
Chem smoke does slightly less damage (if it contains damaging reagents)
Chem smoke proc calls reduced by 60-70% (significant lag reduction)
Foam works properly again
Foam proc calls reduced by 70-80%
They also added extra checks to
-Everytime a mob attacked (checking for super strength and electric hands)
-Every time a mob was attacked (checking for dermal armour)
-Every time a human was shot (checking for reflex)
-Every time a human breathed (checking for rebreather)
-Every tick of human life (checking for regen)
-Every hud update (checking for radar)
Not to mention just cluttered mob code in general. I know there won't be any noticeable performance increase from this but seeing as they were never going to be finished (I asked Doohl beforehand) and mob code is messy enough as is, I think only good can come of removing the code.
git-svn-id: http://tgstation13.googlecode.com/svn/trunk@5587 316c924e-a436-60f5-8080-3fe189b3f50e
if some explosive reaction occurs - it firstly tries to explode container, next the surroundings
if container is alive - it cuts half of explosion power, if it is dead in process - cut an half again
Chem smoke will say what reagents are in the chem_smoke.
Added a more_info ? to the last fingerprint that touched the grenade.
Added a more_info ? to bomb's last fingerprint and the attacher.
Admins get a warning message when someone summons guns.
Added a jump link to bomb's activation location.
Added a jump link to chem smoke's activation location, it will also show you the area's name.
-NarSie won't follow mobs in another Z level.
git-svn-id: http://tgstation13.googlecode.com/svn/trunk@4719 316c924e-a436-60f5-8080-3fe189b3f50e
Comments for lighting:
Like sd_DAL (what we used to use), it changes the shading overlays of areas by splitting each type of area into sub-areas
by using the var/tag variable and moving turfs into the contents list of the correct sub-area.
Unlike sd_DAL however it uses a queueing system. Everytime we call a change to opacity or luminosity
(through SetOpacity() or SetLuminosity()) we are simply updating variables and scheduling certain lights/turfs for an
update. Actual updates are handled periodically by the lighting_controller. This carries additional overheads, however it
means that each thing is changed only once per lighting_controller.processing_interval ticks. Allowing for greater control
over how much priority we'd like lighting updates to have. It also makes it possible for us to simply delay updates by
setting lighting_controller.processing = 0 at say, the start of a large explosion, waiting for it to finish, and then
turning it back on with lighting_controller.processing = 1.
Unlike our old system there is a hardcoded maximum luminosity. This is to discourage coders using large luminosity values
for dynamic lighting, as the cost of lighting grows rapidly at large luminosity levels (especially when changing opacity
at runtime)
Also, in order for the queueing system to work, each light remembers the effect it casts on each turf. This is going to
have larger memory requirements than our previous system but hopefully it's worth the hassle for the greater control we
gain. Besides, there are far far worse uses of needless lists in the game, it'd be worth pruning some of them to offset
costs.
Known Issues/TODO:
admin-spawned turfs will have broken lumcounts. Not willing to fix it at this moment
mob luminosity will be lower than expected when one of multiple light sources is dropped after exceeding the maximum luminosity
Shuttles still do not have support for dynamic lighting (I hope to fix this at some point)
No directional lighting support. Fairly easy to add this and the code is ready.
When opening airlocks etc, lighting does not always update to account for the change in opacity.
Explosions now cause lighting to cease processing temporarily.
Moved controller datums to the code/controllers directory. I plan on standardising them.
"Master","Ticker","Lighting","Air","Jobs","Sun","Radio","Supply Shuttle","Emergency Shuttle","Configuration","pAI" controller datums can be accessed via the debug controller verb (used to be the debug master controller verb)
Supply shuttle now uses a controller datum. Shuttles tend to arrive up to 30 seconds late, this is not a bug.
git-svn-id: http://tgstation13.googlecode.com/svn/trunk@4537 316c924e-a436-60f5-8080-3fe189b3f50e
Committing this early to allow pete to commit something involving the .dme file which would probably conflict otherwise.
git-svn-id: http://tgstation13.googlecode.com/svn/trunk@4514 316c924e-a436-60f5-8080-3fe189b3f50e
