CHOMPStation2/code/modules/admin/verbs/mapping.dm

//- Are all the floors with or without air, as they should be? (regular or airless)
//- Does the area have an APC?
//- Does the area have an Air Alarm?
//- Does the area have a Request Console?
//- Does the area have lights?
//- Does the area have a light switch?
//- Does the area have enough intercoms?
//- Does the area have enough security cameras? (Use the 'Camera Range Display' verb under Debug)
//- Is the area connected to the scrubbers air loop?
//- Is the area connected to the vent air loop? (vent pumps)
//- Is everything wired properly?
//- Does the area have a fire alarm and firedoors?
//- Do all pod doors work properly?
//- Are accesses set properly on doors, pod buttons, etc.
//- Are all items placed properly? (not below vents, scrubbers, tables)
//- Does the disposal system work properly from all the disposal units in this room and all the units, the pipes of which pass through this room?
//- Check for any misplaced or stacked piece of pipe (air and disposal)
//- Check for any misplaced or stacked piece of wire
//- Identify how hard it is to break into the area and where the weak points are
//- Check if the area has too much empty space. If so, make it smaller and replace the rest with maintenance tunnels.

var/camera_range_display_status = 0
var/intercom_range_display_status = 0

GLOBAL_LIST_BOILERPLATE(all_debugging_effects, /obj/effect/debugging)

/obj/effect/debugging/camera_range
	icon = 'icons/480x480.dmi'
	icon_state = "25percent"

/obj/effect/debugging/camera_range/Initialize(mapload, ...)
	. = ..()
	src.pixel_x = -224
	src.pixel_y = -224

/obj/effect/debugging/marker
	icon = 'icons/turf/areas.dmi'
	icon_state = "yellow"

/obj/effect/debugging/marker/Move()
	return 0

/client/proc/do_not_use_these()
	set category = "Mapping"
	set name = "-None of these are for ingame use!!"

/client/proc/camera_view()
	set category = "Mapping"
	set name = "Camera Range Display"

	if(camera_range_display_status)
		camera_range_display_status = 0
	else
		camera_range_display_status = 1



	for(var/obj/effect/debugging/camera_range/C in GLOB.all_debugging_effects)
		qdel(C)

	if(camera_range_display_status)
		for(var/obj/machinery/camera/C in cameranet.cameras)
			new/obj/effect/debugging/camera_range(C.loc)
	feedback_add_details("admin_verb","mCRD") //If you are copy-pasting this, ensure the 2nd parameter is unique to the new proc!



/client/proc/sec_camera_report()
	set category = "Mapping"
	set name = "Camera Report"

	if(!master_controller)
		tgui_alert_async(usr,"Master_controller not found.","Sec Camera Report")
		return 0

	var/list/obj/machinery/camera/CL = list()

	for(var/obj/machinery/camera/C in cameranet.cameras)
		CL += C

	var/output = span_bold("CAMERA ANNOMALITIES REPORT") + {"<HR>
"} + span_bold("The following annomalities have been detected. The ones in red need immediate attention: Some of those in black may be intentional.") + {"<BR><ul>"}

	for(var/obj/machinery/camera/C1 in CL)
		for(var/obj/machinery/camera/C2 in CL)
			if(C1 != C2)
				if(C1.c_tag == C2.c_tag)
					output += "<li>" + span_red("c_tag match for sec. cameras at \[[C1.x], [C1.y], [C1.z]\] ([C1.loc.loc]) and \[[C2.x], [C2.y], [C2.z]\] ([C2.loc.loc]) - c_tag is [C1.c_tag]") + "</li>"
				if(C1.loc == C2.loc && C1.dir == C2.dir && C1.pixel_x == C2.pixel_x && C1.pixel_y == C2.pixel_y)
					output += "<li>" + span_red("FULLY overlapping sec. cameras at \[[C1.x], [C1.y], [C1.z]\] ([C1.loc.loc]) Networks: [C1.network] and [C2.network]") + "</li>"
				if(C1.loc == C2.loc)
					output += "<li>overlapping sec. cameras at \[[C1.x], [C1.y], [C1.z]\] ([C1.loc.loc]) Networks: [C1.network] and [C2.network]</li>"
		var/turf/T = get_step(C1,turn(C1.dir,180))
		if(!T || !isturf(T) || !T.density )
			if(!(locate(/obj/structure/grille,T)))
				var/window_check = 0
				for(var/obj/structure/window/W in T)
					if (W.dir == turn(C1.dir,180) || (W.dir in list(5,6,9,10)) )
						window_check = 1
						break
				if(!window_check)
					output += "<li>" + span_red("Camera not connected to wall at \[[C1.x], [C1.y], [C1.z]\] ([C1.loc.loc]) Network: [C1.network]") + "</li>"

	output += "</ul>"

	var/datum/browser/popup = new(src, "airreport", "Airreport", 1000, 500)
	popup.set_content(output)
	popup.open()
	feedback_add_details("admin_verb","mCRP") //If you are copy-pasting this, ensure the 2nd parameter is unique to the new proc!

/client/proc/intercom_view()
	set category = "Mapping"
	set name = "Intercom Range Display"

	if(intercom_range_display_status)
		intercom_range_display_status = 0
	else
		intercom_range_display_status = 1

	for(var/obj/effect/debugging/marker/M in GLOB.all_debugging_effects)
		qdel(M)

	if(intercom_range_display_status)
		for(var/obj/item/radio/intercom/I in GLOB.machines)
			for(var/turf/T in orange(7,I))
				var/obj/effect/debugging/marker/F = new/obj/effect/debugging/marker(T)
				if (!(F in view(7,I.loc)))
					qdel(F)
	feedback_add_details("admin_verb","mIRD") //If you are copy-pasting this, ensure the 2nd parameter is unique to the new proc!

var/list/debug_verbs = list (
		/client/proc/do_not_use_these
		,/client/proc/camera_view
		,/client/proc/sec_camera_report
		,/client/proc/intercom_view
		,/client/proc/Cell
		,/client/proc/atmosscan
		,/client/proc/powerdebug
		,/client/proc/count_objects_on_z_level
		,/client/proc/count_objects_all
		,/client/proc/jump_to_dead_group
		,/client/proc/startSinglo
		,/client/proc/cmd_admin_grantfullaccess
		,/client/proc/kaboom
		,/client/proc/cmd_admin_areatest
		,/client/proc/cmd_admin_rejuvenate
		,/datum/admins/proc/show_traitor_panel
		,/client/proc/print_jobban_old
		,/client/proc/print_jobban_old_filter
		,/client/proc/forceEvent
		,/client/proc/Zone_Info
		,/client/proc/Test_ZAS_Connection
		,/client/proc/ZoneTick
		,/client/proc/rebootAirMaster
		,/client/proc/hide_debug_verbs
		,/client/proc/testZAScolors
		,/client/proc/testZAScolors_remove
		,/datum/admins/proc/setup_supermatter
		,/client/proc/atmos_toggle_debug
		,/client/proc/spawn_tanktransferbomb
		,/client/proc/take_picture
	)


/client/proc/enable_debug_verbs()
	set category = "Debug.Misc"
	set name = "Debug verbs"

	if(!check_rights(R_DEBUG)) return

	add_verb(src, debug_verbs)

	feedback_add_details("admin_verb","mDV") //If you are copy-pasting this, ensure the 2nd parameter is unique to the new proc!

/client/proc/hide_debug_verbs()
	set category = "Debug.Misc"
	set name = "Hide Debug verbs"

	if(!check_rights(R_DEBUG)) return

	remove_verb(src, debug_verbs)

	feedback_add_details("admin_verb","hDV") //If you are copy-pasting this, ensure the 2nd parameter is unique to the new proc!


/client/var/list/testZAScolors_turfs = list()
/client/var/list/testZAScolors_zones = list()
/client/var/usedZAScolors = 0
/client/var/list/image/ZAScolors = list()

/client/proc/recurse_zone(var/zone/Z, var/recurse_level =1)
	testZAScolors_zones += Z
	if(recurse_level > 10)
		return
	var/icon/yellow = new('icons/misc/debug_group.dmi', "yellow")

	for(var/turf/T in Z.contents)
		images += image(yellow, T, "zasdebug", PLANE_ADMIN2) // CHOMPEDIT
		testZAScolors_turfs += T
	for(var/connection_edge/zone/edge in Z.edges)
		var/zone/connected = edge.get_connected_zone(Z)
		if(connected in testZAScolors_zones)
			continue
		recurse_zone(connected,recurse_level+1)


/client/proc/testZAScolors()
	set category = "Mapping.ZAS"
	set name = "Check ZAS connections"

	if(!check_rights(R_DEBUG)) return
	testZAScolors_remove()

	var/turf/simulated/location = get_turf(usr)

	if(!istype(location, /turf/simulated)) // We're in space, let's not cause runtimes.
		to_chat(usr, span_red("this debug tool cannot be used from space"))
		return

	var/icon/red = new('icons/misc/debug_group.dmi', "red")		//created here so we don't have to make thousands of these.
	var/icon/green = new('icons/misc/debug_group.dmi', "green")
	var/icon/blue = new('icons/misc/debug_group.dmi', "blue")

	if(!usedZAScolors)
		to_chat(usr, "ZAS Test Colors")
		to_chat(usr, "[span_green("Green")] = Zone you are standing in")
		to_chat(usr, "[span_blue("Blue")] = Connected zone to the zone you are standing in")
		to_chat(usr, "[span_yellow("Yellow")] = A zone that is connected but not one adjacent to your connected zone")
		to_chat(usr, "[span_red("Red")] = Not connected")
		usedZAScolors = 1

	testZAScolors_zones += location.zone
	for(var/turf/T in location.zone.contents)
		images += image(green, T,"zasdebug", PLANE_ADMIN2) // CHOMPEDIT
		testZAScolors_turfs += T
	for(var/connection_edge/zone/edge in location.zone.edges)
		var/zone/Z = edge.get_connected_zone(location.zone)
		testZAScolors_zones += Z
		for(var/turf/T in Z.contents)
			images += image(blue, T,"zasdebug",PLANE_ADMIN2) // CHOMPEDIT
			testZAScolors_turfs += T
		for(var/connection_edge/zone/z_edge in Z.edges)
			var/zone/connected = z_edge.get_connected_zone(Z)
			if(connected in testZAScolors_zones)
				continue
			recurse_zone(connected,1)

	for(var/turf/T in range(25,location))
		if(!istype(T))
			continue
		if(T in testZAScolors_turfs)
			continue
		images += image(red, T, "zasdebug", PLANE_ADMIN2) // CHOMPEDIT
		testZAScolors_turfs += T

/client/proc/testZAScolors_remove()
	set category = "Mapping.ZAS"
	set name = "Remove ZAS connection colors"

	testZAScolors_turfs.Cut()
	testZAScolors_zones.Cut()

	if(images.len)
		for(var/image/i in images)
			if(i.icon_state == "zasdebug")
				images.Remove(i)

/client/proc/rebootAirMaster()
	set category = "Mapping.ZAS"
	set name = "Reboot ZAS"

	if(tgui_alert(usr, "This will destroy and remake all zone geometry on the whole map.","Reboot ZAS",list("Reboot ZAS","Nevermind")) == "Reboot ZAS")
		SSair.RebootZAS()

/client/proc/count_objects_on_z_level()
	set category = "Mapping"
	set name = "Count Objects On Level"
	var/level = tgui_input_text(usr, "Which z-level?","Level?")
	if(!level) return
	var/num_level = text2num(level)
	if(!num_level) return
	if(!isnum(num_level)) return

	var/type_text = tgui_input_text(usr, "Which type path?","Path?")
	if(!type_text) return
	var/type_path = text2path(type_text)
	if(!type_path) return

	var/count = 1

	var/list/atom/atom_list = list()

	for(var/atom/A in world)
		if(istype(A,type_path))
			var/atom/B = A
			while(!(isturf(B.loc)))
				if(B && B.loc)
					B = B.loc
				else
					break
			if(B)
				if(B.z == num_level)
					count++
					atom_list += A
	/*
	var/atom/temp_atom
	for(var/i = 0; i <= (atom_list.len/10); i++)
		var/line = ""
		for(var/j = 1; j <= 10; j++)
			if(i*10+j <= atom_list.len)
				temp_atom = atom_list[i*10+j]
				line += " no.[i+10+j]@\[[temp_atom.x], [temp_atom.y], [temp_atom.z]\]; "
		to_world(line)*/

	to_world("There are [count] objects of type [type_path] on z-level [num_level]")
	feedback_add_details("admin_verb","mOBJZ") //If you are copy-pasting this, ensure the 2nd parameter is unique to the new proc!

/client/proc/count_objects_all()
	set category = "Mapping"
	set name = "Count Objects All"

	var/type_text = tgui_input_text(usr, "Which type path?","")
	if(!type_text) return
	var/type_path = text2path(type_text)
	if(!type_path) return

	var/count = 0

	for(var/atom/A in world)
		if(istype(A,type_path))
			count++
	/*
	var/atom/temp_atom
	for(var/i = 0; i <= (atom_list.len/10); i++)
		var/line = ""
		for(var/j = 1; j <= 10; j++)
			if(i*10+j <= atom_list.len)
				temp_atom = atom_list[i*10+j]
				line += " no.[i+10+j]@\[[temp_atom.x], [temp_atom.y], [temp_atom.z]\]; "
		to_world(line)*/

	to_world("There are [count] objects of type [type_path] in the game world")
	feedback_add_details("admin_verb","mOBJ") //If you are copy-pasting this, ensure the 2nd parameter is unique to the new proc!