mirror of
https://github.com/CHOMPStation2/CHOMPStation2.git
synced 2025-12-10 10:12:45 +00:00
1223 lines
42 KiB
Plaintext
1223 lines
42 KiB
Plaintext
////////////////////////////////////////
|
|
//CONTAINS: Air Alarms and Fire Alarms//
|
|
////////////////////////////////////////
|
|
|
|
#define AALARM_MODE_SCRUBBING 1
|
|
#define AALARM_MODE_REPLACEMENT 2 //like scrubbing, but faster.
|
|
#define AALARM_MODE_PANIC 3 //constantly sucks all air
|
|
#define AALARM_MODE_CYCLE 4 //sucks off all air, then refill and switches to scrubbing
|
|
#define AALARM_MODE_FILL 5 //emergency fill
|
|
#define AALARM_MODE_OFF 6 //Shuts it all down.
|
|
|
|
#define AALARM_SCREEN_MAIN 1
|
|
#define AALARM_SCREEN_VENT 2
|
|
#define AALARM_SCREEN_SCRUB 3
|
|
#define AALARM_SCREEN_MODE 4
|
|
#define AALARM_SCREEN_SENSORS 5
|
|
|
|
#define AALARM_REPORT_TIMEOUT 100
|
|
|
|
#define RCON_NO 1
|
|
#define RCON_AUTO 2
|
|
#define RCON_YES 3
|
|
|
|
#define MAX_TEMPERATURE 90
|
|
#define MIN_TEMPERATURE -40
|
|
|
|
//all air alarms in area are connected via magic
|
|
/area
|
|
var/obj/machinery/alarm/master_air_alarm
|
|
var/list/air_vent_names = list()
|
|
var/list/air_scrub_names = list()
|
|
var/list/air_vent_info = list()
|
|
var/list/air_scrub_info = list()
|
|
|
|
/obj/machinery/alarm
|
|
name = "alarm"
|
|
icon = 'icons/obj/monitors.dmi'
|
|
icon_state = "alarm0"
|
|
anchored = 1
|
|
use_power = 1
|
|
idle_power_usage = 80
|
|
active_power_usage = 1000 //For heating/cooling rooms. 1000 joules equates to about 1 degree every 2 seconds for a single tile of air.
|
|
power_channel = ENVIRON
|
|
req_one_access = list(access_atmospherics, access_engine_equip)
|
|
var/alarm_id = null
|
|
var/breach_detection = 1 // Whether to use automatic breach detection or not
|
|
var/frequency = 1439
|
|
//var/skipprocess = 0 //Experimenting
|
|
var/alarm_frequency = 1437
|
|
var/remote_control = 0
|
|
var/rcon_setting = 2
|
|
var/rcon_time = 0
|
|
var/locked = 1
|
|
var/wiresexposed = 0 // If it's been screwdrivered open.
|
|
var/aidisabled = 0
|
|
var/shorted = 0
|
|
|
|
var/datum/wires/alarm/wires
|
|
|
|
var/mode = AALARM_MODE_SCRUBBING
|
|
var/screen = AALARM_SCREEN_MAIN
|
|
var/area_uid
|
|
var/area/alarm_area
|
|
var/buildstage = 2 //2 is built, 1 is building, 0 is frame.
|
|
|
|
var/target_temperature = T0C+20
|
|
var/regulating_temperature = 0
|
|
|
|
var/datum/radio_frequency/radio_connection
|
|
|
|
var/list/TLV = list()
|
|
var/list/trace_gas = list("sleeping_agent", "volatile_fuel") //list of other gases that this air alarm is able to detect
|
|
|
|
var/danger_level = 0
|
|
var/pressure_dangerlevel = 0
|
|
var/oxygen_dangerlevel = 0
|
|
var/co2_dangerlevel = 0
|
|
var/phoron_dangerlevel = 0
|
|
var/temperature_dangerlevel = 0
|
|
var/other_dangerlevel = 0
|
|
|
|
var/report_danger_level = 1
|
|
|
|
/obj/machinery/alarm/nobreach
|
|
breach_detection = 0
|
|
|
|
/obj/machinery/alarm/monitor
|
|
report_danger_level = 0
|
|
breach_detection = 0
|
|
|
|
/obj/machinery/alarm/server/New()
|
|
..()
|
|
req_access = list(access_rd, access_atmospherics, access_engine_equip)
|
|
TLV["oxygen"] = list(-1.0, -1.0,-1.0,-1.0) // Partial pressure, kpa
|
|
TLV["carbon dioxide"] = list(-1.0, -1.0, 5, 10) // Partial pressure, kpa
|
|
TLV["phoron"] = list(-1.0, -1.0, 0.2, 0.5) // Partial pressure, kpa
|
|
TLV["other"] = list(-1.0, -1.0, 0.5, 1.0) // Partial pressure, kpa
|
|
TLV["pressure"] = list(0,ONE_ATMOSPHERE*0.10,ONE_ATMOSPHERE*1.40,ONE_ATMOSPHERE*1.60) /* kpa */
|
|
TLV["temperature"] = list(20, 40, 140, 160) // K
|
|
target_temperature = 90
|
|
|
|
/obj/machinery/alarm/Destroy()
|
|
unregister_radio(src, frequency)
|
|
if(wires)
|
|
qdel(wires)
|
|
wires = null
|
|
..()
|
|
|
|
/obj/machinery/alarm/New(var/loc, var/dir, var/building = 0)
|
|
..()
|
|
|
|
if(building)
|
|
if(loc)
|
|
src.loc = loc
|
|
|
|
if(dir)
|
|
src.set_dir(dir)
|
|
|
|
buildstage = 0
|
|
wiresexposed = 1
|
|
pixel_x = (dir & 3)? 0 : (dir == 4 ? -24 : 24)
|
|
pixel_y = (dir & 3)? (dir ==1 ? -24 : 24) : 0
|
|
update_icon()
|
|
return
|
|
|
|
first_run()
|
|
|
|
/obj/machinery/alarm/proc/first_run()
|
|
alarm_area = get_area(src)
|
|
area_uid = alarm_area.uid
|
|
if (name == "alarm")
|
|
name = "[alarm_area.name] Air Alarm"
|
|
|
|
if(!wires)
|
|
wires = new(src)
|
|
|
|
// breathable air according to human/Life()
|
|
TLV["oxygen"] = list(16, 19, 135, 140) // Partial pressure, kpa
|
|
TLV["carbon dioxide"] = list(-1.0, -1.0, 5, 10) // Partial pressure, kpa
|
|
TLV["phoron"] = list(-1.0, -1.0, 0.2, 0.5) // Partial pressure, kpa
|
|
TLV["other"] = list(-1.0, -1.0, 0.5, 1.0) // Partial pressure, kpa
|
|
TLV["pressure"] = list(ONE_ATMOSPHERE*0.80,ONE_ATMOSPHERE*0.90,ONE_ATMOSPHERE*1.10,ONE_ATMOSPHERE*1.20) /* kpa */
|
|
TLV["temperature"] = list(T0C-26, T0C, T0C+40, T0C+66) // K
|
|
|
|
|
|
/obj/machinery/alarm/initialize()
|
|
set_frequency(frequency)
|
|
if (!master_is_operating())
|
|
elect_master()
|
|
|
|
/obj/machinery/alarm/process()
|
|
if((stat & (NOPOWER|BROKEN)) || shorted || buildstage != 2)
|
|
return
|
|
|
|
var/turf/simulated/location = loc
|
|
if(!istype(location)) return//returns if loc is not simulated
|
|
|
|
var/datum/gas_mixture/environment = location.return_air()
|
|
|
|
//Handle temperature adjustment here.
|
|
handle_heating_cooling(environment)
|
|
|
|
var/old_level = danger_level
|
|
var/old_pressurelevel = pressure_dangerlevel
|
|
danger_level = overall_danger_level(environment)
|
|
|
|
if (old_level != danger_level)
|
|
apply_danger_level(danger_level)
|
|
|
|
if (old_pressurelevel != pressure_dangerlevel)
|
|
if (breach_detected())
|
|
mode = AALARM_MODE_OFF
|
|
apply_mode()
|
|
|
|
if (mode==AALARM_MODE_CYCLE && environment.return_pressure()<ONE_ATMOSPHERE*0.05)
|
|
mode=AALARM_MODE_FILL
|
|
apply_mode()
|
|
|
|
//atmos computer remote controll stuff
|
|
switch(rcon_setting)
|
|
if(RCON_NO)
|
|
remote_control = 0
|
|
if(RCON_AUTO)
|
|
if(danger_level == 2)
|
|
remote_control = 1
|
|
else
|
|
remote_control = 0
|
|
if(RCON_YES)
|
|
remote_control = 1
|
|
|
|
return
|
|
|
|
/obj/machinery/alarm/proc/handle_heating_cooling(var/datum/gas_mixture/environment)
|
|
if (!regulating_temperature)
|
|
//check for when we should start adjusting temperature
|
|
if(!get_danger_level(target_temperature, TLV["temperature"]) && abs(environment.temperature - target_temperature) > 2.0)
|
|
update_use_power(2)
|
|
regulating_temperature = 1
|
|
visible_message("\The [src] clicks as it starts [environment.temperature > target_temperature ? "cooling" : "heating"] the room.",\
|
|
"You hear a click and a faint electronic hum.")
|
|
else
|
|
//check for when we should stop adjusting temperature
|
|
if (get_danger_level(target_temperature, TLV["temperature"]) || abs(environment.temperature - target_temperature) <= 0.5)
|
|
update_use_power(1)
|
|
regulating_temperature = 0
|
|
visible_message("\The [src] clicks quietly as it stops [environment.temperature > target_temperature ? "cooling" : "heating"] the room.",\
|
|
"You hear a click as a faint electronic humming stops.")
|
|
|
|
if (regulating_temperature)
|
|
if(target_temperature > T0C + MAX_TEMPERATURE)
|
|
target_temperature = T0C + MAX_TEMPERATURE
|
|
|
|
if(target_temperature < T0C + MIN_TEMPERATURE)
|
|
target_temperature = T0C + MIN_TEMPERATURE
|
|
|
|
var/datum/gas_mixture/gas
|
|
gas = environment.remove(0.25*environment.total_moles)
|
|
if(gas)
|
|
|
|
if (gas.temperature <= target_temperature) //gas heating
|
|
var/energy_used = min( gas.get_thermal_energy_change(target_temperature) , active_power_usage)
|
|
|
|
gas.add_thermal_energy(energy_used)
|
|
//use_power(energy_used, ENVIRON) //handle by update_use_power instead
|
|
else //gas cooling
|
|
var/heat_transfer = min(abs(gas.get_thermal_energy_change(target_temperature)), active_power_usage)
|
|
|
|
//Assume the heat is being pumped into the hull which is fixed at 20 C
|
|
//none of this is really proper thermodynamics but whatever
|
|
|
|
var/cop = gas.temperature/T20C //coefficient of performance -> power used = heat_transfer/cop
|
|
|
|
heat_transfer = min(heat_transfer, cop * active_power_usage) //this ensures that we don't use more than active_power_usage amount of power
|
|
|
|
heat_transfer = -gas.add_thermal_energy(-heat_transfer) //get the actual heat transfer
|
|
|
|
//use_power(heat_transfer / cop, ENVIRON) //handle by update_use_power instead
|
|
|
|
environment.merge(gas)
|
|
|
|
/obj/machinery/alarm/proc/overall_danger_level(var/datum/gas_mixture/environment)
|
|
var/partial_pressure = R_IDEAL_GAS_EQUATION*environment.temperature/environment.volume
|
|
var/environment_pressure = environment.return_pressure()
|
|
|
|
var/other_moles = 0
|
|
for(var/g in trace_gas)
|
|
other_moles += environment.gas[g] //this is only going to be used in a partial pressure calc, so we don't need to worry about group_multiplier here.
|
|
|
|
pressure_dangerlevel = get_danger_level(environment_pressure, TLV["pressure"])
|
|
oxygen_dangerlevel = get_danger_level(environment.gas["oxygen"]*partial_pressure, TLV["oxygen"])
|
|
co2_dangerlevel = get_danger_level(environment.gas["carbon_dioxide"]*partial_pressure, TLV["carbon dioxide"])
|
|
phoron_dangerlevel = get_danger_level(environment.gas["phoron"]*partial_pressure, TLV["phoron"])
|
|
temperature_dangerlevel = get_danger_level(environment.temperature, TLV["temperature"])
|
|
other_dangerlevel = get_danger_level(other_moles*partial_pressure, TLV["other"])
|
|
|
|
return max(
|
|
pressure_dangerlevel,
|
|
oxygen_dangerlevel,
|
|
co2_dangerlevel,
|
|
phoron_dangerlevel,
|
|
other_dangerlevel,
|
|
temperature_dangerlevel
|
|
)
|
|
|
|
// Returns whether this air alarm thinks there is a breach, given the sensors that are available to it.
|
|
/obj/machinery/alarm/proc/breach_detected()
|
|
var/turf/simulated/location = loc
|
|
|
|
if(!istype(location))
|
|
return 0
|
|
|
|
if(breach_detection == 0)
|
|
return 0
|
|
|
|
var/datum/gas_mixture/environment = location.return_air()
|
|
var/environment_pressure = environment.return_pressure()
|
|
var/pressure_levels = TLV["pressure"]
|
|
|
|
if (environment_pressure <= pressure_levels[1]) //low pressures
|
|
if (!(mode == AALARM_MODE_PANIC || mode == AALARM_MODE_CYCLE))
|
|
return 1
|
|
|
|
return 0
|
|
|
|
|
|
/obj/machinery/alarm/proc/master_is_operating()
|
|
return alarm_area.master_air_alarm && !(alarm_area.master_air_alarm.stat & (NOPOWER|BROKEN))
|
|
|
|
|
|
/obj/machinery/alarm/proc/elect_master()
|
|
for (var/obj/machinery/alarm/AA in alarm_area)
|
|
if (!(AA.stat & (NOPOWER|BROKEN)))
|
|
alarm_area.master_air_alarm = AA
|
|
return 1
|
|
return 0
|
|
|
|
/obj/machinery/alarm/proc/get_danger_level(var/current_value, var/list/danger_levels)
|
|
if((current_value >= danger_levels[4] && danger_levels[4] > 0) || current_value <= danger_levels[1])
|
|
return 2
|
|
if((current_value >= danger_levels[3] && danger_levels[3] > 0) || current_value <= danger_levels[2])
|
|
return 1
|
|
return 0
|
|
|
|
/obj/machinery/alarm/update_icon()
|
|
if(wiresexposed)
|
|
icon_state = "alarmx"
|
|
return
|
|
if((stat & (NOPOWER|BROKEN)) || shorted)
|
|
icon_state = "alarmp"
|
|
return
|
|
|
|
var/icon_level = danger_level
|
|
if (alarm_area.atmosalm)
|
|
icon_level = max(icon_level, 1) //if there's an atmos alarm but everything is okay locally, no need to go past yellow
|
|
|
|
switch(icon_level)
|
|
if (0)
|
|
icon_state = "alarm0"
|
|
if (1)
|
|
icon_state = "alarm2" //yes, alarm2 is yellow alarm
|
|
if (2)
|
|
icon_state = "alarm1"
|
|
|
|
/obj/machinery/alarm/receive_signal(datum/signal/signal)
|
|
if(stat & (NOPOWER|BROKEN))
|
|
return
|
|
if (alarm_area.master_air_alarm != src)
|
|
if (master_is_operating())
|
|
return
|
|
elect_master()
|
|
if (alarm_area.master_air_alarm != src)
|
|
return
|
|
if(!signal || signal.encryption)
|
|
return
|
|
var/id_tag = signal.data["tag"]
|
|
if (!id_tag)
|
|
return
|
|
if (signal.data["area"] != area_uid)
|
|
return
|
|
if (signal.data["sigtype"] != "status")
|
|
return
|
|
|
|
var/dev_type = signal.data["device"]
|
|
if(!(id_tag in alarm_area.air_scrub_names) && !(id_tag in alarm_area.air_vent_names))
|
|
register_env_machine(id_tag, dev_type)
|
|
if(dev_type == "AScr")
|
|
alarm_area.air_scrub_info[id_tag] = signal.data
|
|
else if(dev_type == "AVP")
|
|
alarm_area.air_vent_info[id_tag] = signal.data
|
|
|
|
/obj/machinery/alarm/proc/register_env_machine(var/m_id, var/device_type)
|
|
var/new_name
|
|
if (device_type=="AVP")
|
|
new_name = "[alarm_area.name] Vent Pump #[alarm_area.air_vent_names.len+1]"
|
|
alarm_area.air_vent_names[m_id] = new_name
|
|
else if (device_type=="AScr")
|
|
new_name = "[alarm_area.name] Air Scrubber #[alarm_area.air_scrub_names.len+1]"
|
|
alarm_area.air_scrub_names[m_id] = new_name
|
|
else
|
|
return
|
|
spawn (10)
|
|
send_signal(m_id, list("init" = new_name) )
|
|
|
|
/obj/machinery/alarm/proc/refresh_all()
|
|
for(var/id_tag in alarm_area.air_vent_names)
|
|
var/list/I = alarm_area.air_vent_info[id_tag]
|
|
if (I && I["timestamp"]+AALARM_REPORT_TIMEOUT/2 > world.time)
|
|
continue
|
|
send_signal(id_tag, list("status") )
|
|
for(var/id_tag in alarm_area.air_scrub_names)
|
|
var/list/I = alarm_area.air_scrub_info[id_tag]
|
|
if (I && I["timestamp"]+AALARM_REPORT_TIMEOUT/2 > world.time)
|
|
continue
|
|
send_signal(id_tag, list("status") )
|
|
|
|
/obj/machinery/alarm/proc/set_frequency(new_frequency)
|
|
radio_controller.remove_object(src, frequency)
|
|
frequency = new_frequency
|
|
radio_connection = radio_controller.add_object(src, frequency, RADIO_TO_AIRALARM)
|
|
|
|
/obj/machinery/alarm/proc/send_signal(var/target, var/list/command)//sends signal 'command' to 'target'. Returns 0 if no radio connection, 1 otherwise
|
|
if(!radio_connection)
|
|
return 0
|
|
|
|
var/datum/signal/signal = new
|
|
signal.transmission_method = 1 //radio signal
|
|
signal.source = src
|
|
|
|
signal.data = command
|
|
signal.data["tag"] = target
|
|
signal.data["sigtype"] = "command"
|
|
|
|
radio_connection.post_signal(src, signal, RADIO_FROM_AIRALARM)
|
|
// world << text("Signal [] Broadcasted to []", command, target)
|
|
|
|
return 1
|
|
|
|
/obj/machinery/alarm/proc/apply_mode()
|
|
//propagate mode to other air alarms in the area
|
|
//TODO: make it so that players can choose between applying the new mode to the room they are in (related area) vs the entire alarm area
|
|
for (var/obj/machinery/alarm/AA in alarm_area)
|
|
AA.mode = mode
|
|
|
|
switch(mode)
|
|
if(AALARM_MODE_SCRUBBING)
|
|
for(var/device_id in alarm_area.air_scrub_names)
|
|
send_signal(device_id, list("power"= 1, "co2_scrub"= 1, "scrubbing"= 1, "panic_siphon"= 0) )
|
|
for(var/device_id in alarm_area.air_vent_names)
|
|
send_signal(device_id, list("power"= 1, "checks"= "default", "set_external_pressure"= "default") )
|
|
|
|
if(AALARM_MODE_PANIC, AALARM_MODE_CYCLE)
|
|
for(var/device_id in alarm_area.air_scrub_names)
|
|
send_signal(device_id, list("power"= 1, "panic_siphon"= 1) )
|
|
for(var/device_id in alarm_area.air_vent_names)
|
|
send_signal(device_id, list("power"= 0) )
|
|
|
|
if(AALARM_MODE_REPLACEMENT)
|
|
for(var/device_id in alarm_area.air_scrub_names)
|
|
send_signal(device_id, list("power"= 1, "panic_siphon"= 1) )
|
|
for(var/device_id in alarm_area.air_vent_names)
|
|
send_signal(device_id, list("power"= 1, "checks"= "default", "set_external_pressure"= "default") )
|
|
|
|
if(AALARM_MODE_FILL)
|
|
for(var/device_id in alarm_area.air_scrub_names)
|
|
send_signal(device_id, list("power"= 0) )
|
|
for(var/device_id in alarm_area.air_vent_names)
|
|
send_signal(device_id, list("power"= 1, "checks"= "default", "set_external_pressure"= "default") )
|
|
|
|
if(AALARM_MODE_OFF)
|
|
for(var/device_id in alarm_area.air_scrub_names)
|
|
send_signal(device_id, list("power"= 0) )
|
|
for(var/device_id in alarm_area.air_vent_names)
|
|
send_signal(device_id, list("power"= 0) )
|
|
|
|
/obj/machinery/alarm/proc/apply_danger_level(var/new_danger_level)
|
|
if (report_danger_level && alarm_area.atmosalert(new_danger_level, src))
|
|
post_alert(new_danger_level)
|
|
|
|
update_icon()
|
|
|
|
/obj/machinery/alarm/proc/post_alert(alert_level)
|
|
var/datum/radio_frequency/frequency = radio_controller.return_frequency(alarm_frequency)
|
|
if(!frequency)
|
|
return
|
|
|
|
var/datum/signal/alert_signal = new
|
|
alert_signal.source = src
|
|
alert_signal.transmission_method = 1
|
|
alert_signal.data["zone"] = alarm_area.name
|
|
alert_signal.data["type"] = "Atmospheric"
|
|
|
|
if(alert_level==2)
|
|
alert_signal.data["alert"] = "severe"
|
|
else if (alert_level==1)
|
|
alert_signal.data["alert"] = "minor"
|
|
else if (alert_level==0)
|
|
alert_signal.data["alert"] = "clear"
|
|
|
|
frequency.post_signal(src, alert_signal)
|
|
|
|
/obj/machinery/alarm/attack_ai(mob/user)
|
|
ui_interact(user)
|
|
|
|
/obj/machinery/alarm/attack_hand(mob/user)
|
|
. = ..()
|
|
if (.)
|
|
return
|
|
return interact(user)
|
|
|
|
/obj/machinery/alarm/interact(mob/user)
|
|
ui_interact(user)
|
|
wires.Interact(user)
|
|
|
|
/obj/machinery/alarm/ui_interact(mob/user, ui_key = "main", datum/nanoui/ui = null, force_open = 1, var/master_ui = null, var/datum/topic_state/state = default_state)
|
|
var/data[0]
|
|
var/remote_connection = 0
|
|
var/remote_access = 0
|
|
if(state)
|
|
var/list/href = state.href_list(user)
|
|
remote_connection = href["remote_connection"] // Remote connection means we're non-adjacent/connecting from another computer
|
|
remote_access = href["remote_access"] // Remote access means we also have the privilege to alter the air alarm.
|
|
|
|
data["locked"] = locked && !user.isSilicon()
|
|
data["remote_connection"] = remote_connection
|
|
data["remote_access"] = remote_access
|
|
data["rcon"] = rcon_setting
|
|
data["screen"] = screen
|
|
|
|
populate_status(data)
|
|
|
|
if(!(locked && !remote_connection) || remote_access || user.isSilicon())
|
|
populate_controls(data)
|
|
|
|
ui = nanomanager.try_update_ui(user, src, ui_key, ui, data, force_open)
|
|
if(!ui)
|
|
ui = new(user, src, ui_key, "air_alarm.tmpl", src.name, 325, 625, master_ui = master_ui, state = state)
|
|
ui.set_initial_data(data)
|
|
ui.open()
|
|
ui.set_auto_update(1)
|
|
|
|
/obj/machinery/alarm/proc/populate_status(var/data)
|
|
var/turf/location = get_turf(src)
|
|
var/datum/gas_mixture/environment = location.return_air()
|
|
var/total = environment.total_moles
|
|
|
|
var/list/environment_data = new
|
|
data["has_environment"] = total
|
|
if(total)
|
|
var/pressure = environment.return_pressure()
|
|
environment_data[++environment_data.len] = list("name" = "Pressure", "value" = pressure, "unit" = "kPa", "danger_level" = pressure_dangerlevel)
|
|
environment_data[++environment_data.len] = list("name" = "Oxygen", "value" = environment.gas["oxygen"] / total * 100, "unit" = "%", "danger_level" = oxygen_dangerlevel)
|
|
environment_data[++environment_data.len] = list("name" = "Carbon dioxide", "value" = environment.gas["carbon_dioxide"] / total * 100, "unit" = "%", "danger_level" = co2_dangerlevel)
|
|
environment_data[++environment_data.len] = list("name" = "Toxins", "value" = environment.gas["phoron"] / total * 100, "unit" = "%", "danger_level" = phoron_dangerlevel)
|
|
environment_data[++environment_data.len] = list("name" = "Temperature", "value" = environment.temperature, "unit" = "K ([round(environment.temperature - T0C, 0.1)]C)", "danger_level" = temperature_dangerlevel)
|
|
data["total_danger"] = danger_level
|
|
data["environment"] = environment_data
|
|
data["atmos_alarm"] = alarm_area.atmosalm
|
|
data["fire_alarm"] = alarm_area.fire != null
|
|
data["target_temperature"] = "[target_temperature - T0C]C"
|
|
|
|
/obj/machinery/alarm/proc/populate_controls(var/list/data)
|
|
switch(screen)
|
|
if(AALARM_SCREEN_MAIN)
|
|
data["mode"] = mode
|
|
if(AALARM_SCREEN_VENT)
|
|
var/vents[0]
|
|
for(var/id_tag in alarm_area.air_vent_names)
|
|
var/long_name = alarm_area.air_vent_names[id_tag]
|
|
var/list/info = alarm_area.air_vent_info[id_tag]
|
|
if(!info)
|
|
continue
|
|
vents[++vents.len] = list(
|
|
"id_tag" = id_tag,
|
|
"long_name" = sanitize(long_name),
|
|
"power" = info["power"],
|
|
"checks" = info["checks"],
|
|
"direction" = info["direction"],
|
|
"external" = info["external"]
|
|
)
|
|
data["vents"] = vents
|
|
if(AALARM_SCREEN_SCRUB)
|
|
var/scrubbers[0]
|
|
for(var/id_tag in alarm_area.air_scrub_names)
|
|
var/long_name = alarm_area.air_scrub_names[id_tag]
|
|
var/list/info = alarm_area.air_scrub_info[id_tag]
|
|
if(!info)
|
|
continue
|
|
scrubbers[++scrubbers.len] = list(
|
|
"id_tag" = id_tag,
|
|
"long_name" = sanitize(long_name),
|
|
"power" = info["power"],
|
|
"scrubbing" = info["scrubbing"],
|
|
"panic" = info["panic"],
|
|
"filters" = list()
|
|
)
|
|
scrubbers[scrubbers.len]["filters"] += list(list("name" = "Oxygen", "command" = "o2_scrub", "val" = info["filter_o2"]))
|
|
scrubbers[scrubbers.len]["filters"] += list(list("name" = "Nitrogen", "command" = "n2_scrub", "val" = info["filter_n2"]))
|
|
scrubbers[scrubbers.len]["filters"] += list(list("name" = "Carbon Dioxide", "command" = "co2_scrub","val" = info["filter_co2"]))
|
|
scrubbers[scrubbers.len]["filters"] += list(list("name" = "Toxin" , "command" = "tox_scrub","val" = info["filter_phoron"]))
|
|
scrubbers[scrubbers.len]["filters"] += list(list("name" = "Nitrous Oxide", "command" = "n2o_scrub","val" = info["filter_n2o"]))
|
|
data["scrubbers"] = scrubbers
|
|
if(AALARM_SCREEN_MODE)
|
|
var/modes[0]
|
|
modes[++modes.len] = list("name" = "Filtering - Scrubs out contaminants", "mode" = AALARM_MODE_SCRUBBING, "selected" = mode == AALARM_MODE_SCRUBBING, "danger" = 0)
|
|
modes[++modes.len] = list("name" = "Replace Air - Siphons out air while replacing", "mode" = AALARM_MODE_REPLACEMENT, "selected" = mode == AALARM_MODE_REPLACEMENT, "danger" = 0)
|
|
modes[++modes.len] = list("name" = "Panic - Siphons air out of the room", "mode" = AALARM_MODE_PANIC, "selected" = mode == AALARM_MODE_PANIC, "danger" = 1)
|
|
modes[++modes.len] = list("name" = "Cycle - Siphons air before replacing", "mode" = AALARM_MODE_CYCLE, "selected" = mode == AALARM_MODE_CYCLE, "danger" = 1)
|
|
modes[++modes.len] = list("name" = "Fill - Shuts off scrubbers and opens vents", "mode" = AALARM_MODE_FILL, "selected" = mode == AALARM_MODE_FILL, "danger" = 0)
|
|
modes[++modes.len] = list("name" = "Off - Shuts off vents and scrubbers", "mode" = AALARM_MODE_OFF, "selected" = mode == AALARM_MODE_OFF, "danger" = 0)
|
|
data["modes"] = modes
|
|
data["mode"] = mode
|
|
if(AALARM_SCREEN_SENSORS)
|
|
var/list/selected
|
|
var/thresholds[0]
|
|
|
|
var/list/gas_names = list(
|
|
"oxygen" = "O<sub>2</sub>",
|
|
"carbon dioxide" = "CO<sub>2</sub>",
|
|
"phoron" = "Toxin",
|
|
"other" = "Other")
|
|
for (var/g in gas_names)
|
|
thresholds[++thresholds.len] = list("name" = gas_names[g], "settings" = list())
|
|
selected = TLV[g]
|
|
for(var/i = 1, i <= 4, i++)
|
|
thresholds[thresholds.len]["settings"] += list(list("env" = g, "val" = i, "selected" = selected[i]))
|
|
|
|
selected = TLV["pressure"]
|
|
thresholds[++thresholds.len] = list("name" = "Pressure", "settings" = list())
|
|
for(var/i = 1, i <= 4, i++)
|
|
thresholds[thresholds.len]["settings"] += list(list("env" = "pressure", "val" = i, "selected" = selected[i]))
|
|
|
|
selected = TLV["temperature"]
|
|
thresholds[++thresholds.len] = list("name" = "Temperature", "settings" = list())
|
|
for(var/i = 1, i <= 4, i++)
|
|
thresholds[thresholds.len]["settings"] += list(list("env" = "temperature", "val" = i, "selected" = selected[i]))
|
|
|
|
|
|
data["thresholds"] = thresholds
|
|
|
|
/obj/machinery/alarm/CanUseTopic(var/mob/user, var/datum/topic_state/state, var/href_list = list())
|
|
if(buildstage != 2)
|
|
return STATUS_CLOSE
|
|
|
|
if(aidisabled && user.isMobAI())
|
|
user << "<span class='warning'>AI control for \the [src] interface has been disabled.</span>"
|
|
return STATUS_CLOSE
|
|
|
|
. = shorted ? STATUS_DISABLED : STATUS_INTERACTIVE
|
|
|
|
if(. == STATUS_INTERACTIVE)
|
|
var/extra_href = state.href_list(usr)
|
|
// Prevent remote users from altering RCON settings unless they already have access
|
|
if(href_list["rcon"] && extra_href["remote_connection"] && !extra_href["remote_access"])
|
|
. = STATUS_UPDATE
|
|
|
|
return min(..(), .)
|
|
|
|
/obj/machinery/alarm/Topic(href, href_list, var/nowindow = 0, var/datum/topic_state/state)
|
|
if(..(href, href_list, nowindow, state))
|
|
return 1
|
|
|
|
// hrefs that can always be called -walter0o
|
|
if(href_list["rcon"])
|
|
var/attempted_rcon_setting = text2num(href_list["rcon"])
|
|
|
|
switch(attempted_rcon_setting)
|
|
if(RCON_NO)
|
|
rcon_setting = RCON_NO
|
|
if(RCON_AUTO)
|
|
rcon_setting = RCON_AUTO
|
|
if(RCON_YES)
|
|
rcon_setting = RCON_YES
|
|
return 1
|
|
|
|
if(href_list["temperature"])
|
|
var/list/selected = TLV["temperature"]
|
|
var/max_temperature = min(selected[3] - T0C, MAX_TEMPERATURE)
|
|
var/min_temperature = max(selected[2] - T0C, MIN_TEMPERATURE)
|
|
var/input_temperature = input("What temperature would you like the system to mantain? (Capped between [min_temperature] and [max_temperature]C)", "Thermostat Controls", target_temperature - T0C) as num|null
|
|
if(isnum(input_temperature))
|
|
if(input_temperature > max_temperature || input_temperature < min_temperature)
|
|
usr << "Temperature must be between [min_temperature]C and [max_temperature]C"
|
|
else
|
|
target_temperature = input_temperature + T0C
|
|
return 1
|
|
|
|
// hrefs that need the AA unlocked -walter0o
|
|
var/extra_href = state.href_list(usr)
|
|
if(!(locked && !extra_href["remote_connection"]) || extra_href["remote_access"] || usr.isSilicon())
|
|
if(href_list["command"])
|
|
var/device_id = href_list["id_tag"]
|
|
switch(href_list["command"])
|
|
if("set_external_pressure")
|
|
var/input_pressure = input("What pressure you like the system to mantain?", "Pressure Controls") as num|null
|
|
if(isnum(input_pressure))
|
|
send_signal(device_id, list(href_list["command"] = input_pressure))
|
|
return 1
|
|
|
|
if("reset_external_pressure")
|
|
send_signal(device_id, list(href_list["command"] = ONE_ATMOSPHERE))
|
|
return 1
|
|
|
|
if( "power",
|
|
"adjust_external_pressure",
|
|
"checks",
|
|
"o2_scrub",
|
|
"n2_scrub",
|
|
"co2_scrub",
|
|
"tox_scrub",
|
|
"n2o_scrub",
|
|
"panic_siphon",
|
|
"scrubbing")
|
|
|
|
send_signal(device_id, list(href_list["command"] = text2num(href_list["val"]) ) )
|
|
return 1
|
|
|
|
if("set_threshold")
|
|
var/env = href_list["env"]
|
|
var/threshold = text2num(href_list["var"])
|
|
var/list/selected = TLV[env]
|
|
var/list/thresholds = list("lower bound", "low warning", "high warning", "upper bound")
|
|
var/newval = input("Enter [thresholds[threshold]] for [env]", "Alarm triggers", selected[threshold]) as null|num
|
|
if (isnull(newval))
|
|
return 1
|
|
if (newval<0)
|
|
selected[threshold] = -1.0
|
|
else if (env=="temperature" && newval>5000)
|
|
selected[threshold] = 5000
|
|
else if (env=="pressure" && newval>50*ONE_ATMOSPHERE)
|
|
selected[threshold] = 50*ONE_ATMOSPHERE
|
|
else if (env!="temperature" && env!="pressure" && newval>200)
|
|
selected[threshold] = 200
|
|
else
|
|
newval = round(newval,0.01)
|
|
selected[threshold] = newval
|
|
if(threshold == 1)
|
|
if(selected[1] > selected[2])
|
|
selected[2] = selected[1]
|
|
if(selected[1] > selected[3])
|
|
selected[3] = selected[1]
|
|
if(selected[1] > selected[4])
|
|
selected[4] = selected[1]
|
|
if(threshold == 2)
|
|
if(selected[1] > selected[2])
|
|
selected[1] = selected[2]
|
|
if(selected[2] > selected[3])
|
|
selected[3] = selected[2]
|
|
if(selected[2] > selected[4])
|
|
selected[4] = selected[2]
|
|
if(threshold == 3)
|
|
if(selected[1] > selected[3])
|
|
selected[1] = selected[3]
|
|
if(selected[2] > selected[3])
|
|
selected[2] = selected[3]
|
|
if(selected[3] > selected[4])
|
|
selected[4] = selected[3]
|
|
if(threshold == 4)
|
|
if(selected[1] > selected[4])
|
|
selected[1] = selected[4]
|
|
if(selected[2] > selected[4])
|
|
selected[2] = selected[4]
|
|
if(selected[3] > selected[4])
|
|
selected[3] = selected[4]
|
|
|
|
apply_mode()
|
|
return 1
|
|
|
|
if(href_list["screen"])
|
|
screen = text2num(href_list["screen"])
|
|
return 1
|
|
|
|
if(href_list["atmos_unlock"])
|
|
switch(href_list["atmos_unlock"])
|
|
if("0")
|
|
alarm_area.air_doors_close()
|
|
if("1")
|
|
alarm_area.air_doors_open()
|
|
return 1
|
|
|
|
if(href_list["atmos_alarm"])
|
|
if (alarm_area.atmosalert(2, src))
|
|
apply_danger_level(2)
|
|
update_icon()
|
|
return 1
|
|
|
|
if(href_list["atmos_reset"])
|
|
if (alarm_area.atmosalert(0, src))
|
|
apply_danger_level(0)
|
|
update_icon()
|
|
return 1
|
|
|
|
if(href_list["mode"])
|
|
mode = text2num(href_list["mode"])
|
|
apply_mode()
|
|
return 1
|
|
|
|
/obj/machinery/alarm/attackby(obj/item/W as obj, mob/user as mob)
|
|
src.add_fingerprint(user)
|
|
|
|
switch(buildstage)
|
|
if(2)
|
|
if(istype(W, /obj/item/weapon/screwdriver)) // Opening that Air Alarm up.
|
|
//user << "You pop the Air Alarm's maintence panel open."
|
|
wiresexposed = !wiresexposed
|
|
user << "The wires have been [wiresexposed ? "exposed" : "unexposed"]"
|
|
update_icon()
|
|
return
|
|
|
|
if (wiresexposed && istype(W, /obj/item/weapon/wirecutters))
|
|
user.visible_message("<span class='warning'>[user] has cut the wires inside \the [src]!</span>", "You have cut the wires inside \the [src].")
|
|
playsound(src.loc, 'sound/items/Wirecutter.ogg', 50, 1)
|
|
new/obj/item/stack/cable_coil(get_turf(src), 5)
|
|
buildstage = 1
|
|
update_icon()
|
|
return
|
|
|
|
if (istype(W, /obj/item/weapon/card/id) || istype(W, /obj/item/device/pda))// trying to unlock the interface with an ID card
|
|
if(stat & (NOPOWER|BROKEN))
|
|
user << "It does nothing"
|
|
return
|
|
else
|
|
if(allowed(usr) && !wires.IsIndexCut(AALARM_WIRE_IDSCAN))
|
|
locked = !locked
|
|
user << "\blue You [ locked ? "lock" : "unlock"] the Air Alarm interface."
|
|
else
|
|
user << "\red Access denied."
|
|
return
|
|
|
|
if(1)
|
|
if(istype(W, /obj/item/stack/cable_coil))
|
|
var/obj/item/stack/cable_coil/C = W
|
|
if (C.use(5))
|
|
user << "<span class='notice'>You wire \the [src].</span>"
|
|
buildstage = 2
|
|
update_icon()
|
|
first_run()
|
|
return
|
|
else
|
|
user << "<span class='warning'>You need 5 pieces of cable to do wire \the [src].</span>"
|
|
return
|
|
|
|
else if(istype(W, /obj/item/weapon/crowbar))
|
|
user << "You start prying out the circuit."
|
|
playsound(src.loc, 'sound/items/Crowbar.ogg', 50, 1)
|
|
if(do_after(user,20))
|
|
user << "You pry out the circuit!"
|
|
var/obj/item/weapon/airalarm_electronics/circuit = new /obj/item/weapon/airalarm_electronics()
|
|
circuit.loc = user.loc
|
|
buildstage = 0
|
|
update_icon()
|
|
return
|
|
if(0)
|
|
if(istype(W, /obj/item/weapon/airalarm_electronics))
|
|
user << "You insert the circuit!"
|
|
qdel(W)
|
|
buildstage = 1
|
|
update_icon()
|
|
return
|
|
|
|
else if(istype(W, /obj/item/weapon/wrench))
|
|
user << "You remove the fire alarm assembly from the wall!"
|
|
new /obj/item/frame/air_alarm(get_turf(user))
|
|
playsound(src.loc, 'sound/items/Ratchet.ogg', 50, 1)
|
|
qdel(src)
|
|
|
|
return ..()
|
|
|
|
/obj/machinery/alarm/power_change()
|
|
..()
|
|
spawn(rand(0,15))
|
|
update_icon()
|
|
|
|
/obj/machinery/alarm/examine(mob/user)
|
|
..(user)
|
|
if (buildstage < 2)
|
|
user << "It is not wired."
|
|
if (buildstage < 1)
|
|
user << "The circuit is missing."
|
|
/*
|
|
AIR ALARM CIRCUIT
|
|
Just a object used in constructing air alarms
|
|
*/
|
|
/obj/item/weapon/airalarm_electronics
|
|
name = "air alarm electronics"
|
|
icon = 'icons/obj/doors/door_assembly.dmi'
|
|
icon_state = "door_electronics"
|
|
desc = "Looks like a circuit. Probably is."
|
|
w_class = 2.0
|
|
matter = list(DEFAULT_WALL_MATERIAL = 50, "glass" = 50)
|
|
|
|
/*
|
|
FIRE ALARM
|
|
*/
|
|
/obj/machinery/firealarm
|
|
name = "fire alarm"
|
|
desc = "<i>\"Pull this in case of emergency\"</i>. Thus, keep pulling it forever."
|
|
icon = 'icons/obj/monitors.dmi'
|
|
icon_state = "fire0"
|
|
var/detecting = 1.0
|
|
var/working = 1.0
|
|
var/time = 10.0
|
|
var/timing = 0.0
|
|
var/lockdownbyai = 0
|
|
anchored = 1.0
|
|
use_power = 1
|
|
idle_power_usage = 2
|
|
active_power_usage = 6
|
|
power_channel = ENVIRON
|
|
var/last_process = 0
|
|
var/wiresexposed = 0
|
|
var/buildstage = 2 // 2 = complete, 1 = no wires, 0 = circuit gone
|
|
|
|
/obj/machinery/firealarm/update_icon()
|
|
if(wiresexposed)
|
|
switch(buildstage)
|
|
if(2)
|
|
icon_state="fire_b2"
|
|
if(1)
|
|
icon_state="fire_b1"
|
|
if(0)
|
|
icon_state="fire_b0"
|
|
|
|
return
|
|
|
|
if(stat & BROKEN)
|
|
icon_state = "firex"
|
|
else if(stat & NOPOWER)
|
|
icon_state = "firep"
|
|
else if(!src.detecting)
|
|
icon_state = "fire1"
|
|
else
|
|
icon_state = "fire0"
|
|
|
|
/obj/machinery/firealarm/fire_act(datum/gas_mixture/air, temperature, volume)
|
|
if(src.detecting)
|
|
if(temperature > T0C+200)
|
|
src.alarm() // added check of detector status here
|
|
return
|
|
|
|
/obj/machinery/firealarm/attack_ai(mob/user as mob)
|
|
return src.attack_hand(user)
|
|
|
|
/obj/machinery/firealarm/bullet_act()
|
|
return src.alarm()
|
|
|
|
/obj/machinery/firealarm/emp_act(severity)
|
|
if(prob(50/severity))
|
|
alarm(rand(30/severity, 60/severity))
|
|
..()
|
|
|
|
/obj/machinery/firealarm/attackby(obj/item/W as obj, mob/user as mob)
|
|
src.add_fingerprint(user)
|
|
|
|
if (istype(W, /obj/item/weapon/screwdriver) && buildstage == 2)
|
|
wiresexposed = !wiresexposed
|
|
update_icon()
|
|
return
|
|
|
|
if(wiresexposed)
|
|
switch(buildstage)
|
|
if(2)
|
|
if (istype(W, /obj/item/device/multitool))
|
|
src.detecting = !( src.detecting )
|
|
if (src.detecting)
|
|
user.visible_message("\red [user] has reconnected [src]'s detecting unit!", "You have reconnected [src]'s detecting unit.")
|
|
else
|
|
user.visible_message("\red [user] has disconnected [src]'s detecting unit!", "You have disconnected [src]'s detecting unit.")
|
|
else if (istype(W, /obj/item/weapon/wirecutters))
|
|
user.visible_message("\red [user] has cut the wires inside \the [src]!", "You have cut the wires inside \the [src].")
|
|
new/obj/item/stack/cable_coil(get_turf(src), 5)
|
|
playsound(src.loc, 'sound/items/Wirecutter.ogg', 50, 1)
|
|
buildstage = 1
|
|
update_icon()
|
|
if(1)
|
|
if(istype(W, /obj/item/stack/cable_coil))
|
|
var/obj/item/stack/cable_coil/C = W
|
|
if (C.use(5))
|
|
user << "<span class='notice'>You wire \the [src].</span>"
|
|
buildstage = 2
|
|
return
|
|
else
|
|
user << "<span class='warning'>You need 5 pieces of cable to do wire \the [src].</span>"
|
|
return
|
|
else if(istype(W, /obj/item/weapon/crowbar))
|
|
user << "You pry out the circuit!"
|
|
playsound(src.loc, 'sound/items/Crowbar.ogg', 50, 1)
|
|
spawn(20)
|
|
var/obj/item/weapon/firealarm_electronics/circuit = new /obj/item/weapon/firealarm_electronics()
|
|
circuit.loc = user.loc
|
|
buildstage = 0
|
|
update_icon()
|
|
if(0)
|
|
if(istype(W, /obj/item/weapon/firealarm_electronics))
|
|
user << "You insert the circuit!"
|
|
qdel(W)
|
|
buildstage = 1
|
|
update_icon()
|
|
|
|
else if(istype(W, /obj/item/weapon/wrench))
|
|
user << "You remove the fire alarm assembly from the wall!"
|
|
new /obj/item/frame/fire_alarm(get_turf(user))
|
|
playsound(src.loc, 'sound/items/Ratchet.ogg', 50, 1)
|
|
qdel(src)
|
|
return
|
|
|
|
src.alarm()
|
|
return
|
|
|
|
/obj/machinery/firealarm/process()//Note: this processing was mostly phased out due to other code, and only runs when needed
|
|
if(stat & (NOPOWER|BROKEN))
|
|
return
|
|
|
|
if(src.timing)
|
|
if(src.time > 0)
|
|
src.time = src.time - ((world.timeofday - last_process)/10)
|
|
else
|
|
src.alarm()
|
|
src.time = 0
|
|
src.timing = 0
|
|
processing_objects.Remove(src)
|
|
src.updateDialog()
|
|
last_process = world.timeofday
|
|
|
|
if(locate(/obj/fire) in loc)
|
|
alarm()
|
|
|
|
return
|
|
|
|
/obj/machinery/firealarm/power_change()
|
|
..()
|
|
spawn(rand(0,15))
|
|
update_icon()
|
|
|
|
/obj/machinery/firealarm/attack_hand(mob/user as mob)
|
|
if(user.stat || stat & (NOPOWER|BROKEN))
|
|
return
|
|
|
|
if (buildstage != 2)
|
|
return
|
|
|
|
user.set_machine(src)
|
|
var/area/A = src.loc
|
|
var/d1
|
|
var/d2
|
|
if (istype(user, /mob/living/carbon/human) || istype(user, /mob/living/silicon))
|
|
A = A.loc
|
|
|
|
if (A.fire)
|
|
d1 = text("<A href='?src=\ref[];reset=1'>Reset - Lockdown</A>", src)
|
|
else
|
|
d1 = text("<A href='?src=\ref[];alarm=1'>Alarm - Lockdown</A>", src)
|
|
if (src.timing)
|
|
d2 = text("<A href='?src=\ref[];time=0'>Stop Time Lock</A>", src)
|
|
else
|
|
d2 = text("<A href='?src=\ref[];time=1'>Initiate Time Lock</A>", src)
|
|
var/second = round(src.time) % 60
|
|
var/minute = (round(src.time) - second) / 60
|
|
var/dat = "<HTML><HEAD></HEAD><BODY><TT><B>Fire alarm</B> [d1]\n<HR>The current alert level is: [get_security_level()]</b><br><br>\nTimer System: [d2]<BR>\nTime Left: [(minute ? "[minute]:" : null)][second] <A href='?src=\ref[src];tp=-30'>-</A> <A href='?src=\ref[src];tp=-1'>-</A> <A href='?src=\ref[src];tp=1'>+</A> <A href='?src=\ref[src];tp=30'>+</A>\n</TT></BODY></HTML>"
|
|
user << browse(dat, "window=firealarm")
|
|
onclose(user, "firealarm")
|
|
else
|
|
A = A.loc
|
|
if (A.fire)
|
|
d1 = text("<A href='?src=\ref[];reset=1'>[]</A>", src, stars("Reset - Lockdown"))
|
|
else
|
|
d1 = text("<A href='?src=\ref[];alarm=1'>[]</A>", src, stars("Alarm - Lockdown"))
|
|
if (src.timing)
|
|
d2 = text("<A href='?src=\ref[];time=0'>[]</A>", src, stars("Stop Time Lock"))
|
|
else
|
|
d2 = text("<A href='?src=\ref[];time=1'>[]</A>", src, stars("Initiate Time Lock"))
|
|
var/second = round(src.time) % 60
|
|
var/minute = (round(src.time) - second) / 60
|
|
var/dat = "<HTML><HEAD></HEAD><BODY><TT><B>[stars("Fire alarm")]</B> [d1]\n<HR><b>The current alert level is: [stars(get_security_level())]</b><br><br>\nTimer System: [d2]<BR>\nTime Left: [(minute ? text("[]:", minute) : null)][second] <A href='?src=\ref[src];tp=-30'>-</A> <A href='?src=\ref[src];tp=-1'>-</A> <A href='?src=\ref[src];tp=1'>+</A> <A href='?src=\ref[src];tp=30'>+</A>\n</TT></BODY></HTML>"
|
|
user << browse(dat, "window=firealarm")
|
|
onclose(user, "firealarm")
|
|
return
|
|
|
|
/obj/machinery/firealarm/Topic(href, href_list)
|
|
..()
|
|
if (usr.stat || stat & (BROKEN|NOPOWER))
|
|
return
|
|
|
|
if (buildstage != 2)
|
|
return
|
|
|
|
if ((usr.contents.Find(src) || ((get_dist(src, usr) <= 1) && istype(src.loc, /turf))) || (istype(usr, /mob/living/silicon)))
|
|
usr.set_machine(src)
|
|
if (href_list["reset"])
|
|
src.reset()
|
|
else if (href_list["alarm"])
|
|
src.alarm()
|
|
else if (href_list["time"])
|
|
src.timing = text2num(href_list["time"])
|
|
last_process = world.timeofday
|
|
processing_objects.Add(src)
|
|
else if (href_list["tp"])
|
|
var/tp = text2num(href_list["tp"])
|
|
src.time += tp
|
|
src.time = min(max(round(src.time), 0), 120)
|
|
|
|
src.updateUsrDialog()
|
|
|
|
src.add_fingerprint(usr)
|
|
else
|
|
usr << browse(null, "window=firealarm")
|
|
return
|
|
return
|
|
|
|
/obj/machinery/firealarm/proc/reset()
|
|
if (!( src.working ))
|
|
return
|
|
var/area/area = get_area(src)
|
|
for(var/obj/machinery/firealarm/FA in area)
|
|
fire_alarm.clearAlarm(loc, FA)
|
|
update_icon()
|
|
return
|
|
|
|
/obj/machinery/firealarm/proc/alarm(var/duration = 0)
|
|
if (!( src.working))
|
|
return
|
|
var/area/area = get_area(src)
|
|
for(var/obj/machinery/firealarm/FA in area)
|
|
fire_alarm.triggerAlarm(loc, FA, duration)
|
|
update_icon()
|
|
//playsound(src.loc, 'sound/ambience/signal.ogg', 75, 0)
|
|
return
|
|
|
|
|
|
|
|
/obj/machinery/firealarm/New(loc, dir, building)
|
|
..()
|
|
|
|
if(loc)
|
|
src.loc = loc
|
|
|
|
if(dir)
|
|
src.set_dir(dir)
|
|
|
|
if(building)
|
|
buildstage = 0
|
|
wiresexposed = 1
|
|
pixel_x = (dir & 3)? 0 : (dir == 4 ? -24 : 24)
|
|
pixel_y = (dir & 3)? (dir ==1 ? -24 : 24) : 0
|
|
|
|
/obj/machinery/firealarm/initialize()
|
|
if(z in config.contact_levels)
|
|
if(security_level)
|
|
src.overlays += image('icons/obj/monitors.dmi', "overlay_[get_security_level()]")
|
|
else
|
|
src.overlays += image('icons/obj/monitors.dmi', "overlay_green")
|
|
|
|
update_icon()
|
|
|
|
/*
|
|
FIRE ALARM CIRCUIT
|
|
Just a object used in constructing fire alarms
|
|
*/
|
|
/obj/item/weapon/firealarm_electronics
|
|
name = "fire alarm electronics"
|
|
icon = 'icons/obj/doors/door_assembly.dmi'
|
|
icon_state = "door_electronics"
|
|
desc = "A circuit. It has a label on it, it says \"Can handle heat levels up to 40 degrees celsius!\""
|
|
w_class = 2.0
|
|
matter = list(DEFAULT_WALL_MATERIAL = 50, "glass" = 50)
|
|
|
|
/obj/machinery/partyalarm
|
|
name = "\improper PARTY BUTTON"
|
|
desc = "Cuban Pete is in the house!"
|
|
icon = 'icons/obj/monitors.dmi'
|
|
icon_state = "fire0"
|
|
var/detecting = 1.0
|
|
var/working = 1.0
|
|
var/time = 10.0
|
|
var/timing = 0.0
|
|
var/lockdownbyai = 0
|
|
anchored = 1.0
|
|
use_power = 1
|
|
idle_power_usage = 2
|
|
active_power_usage = 6
|
|
|
|
/obj/machinery/partyalarm/attack_hand(mob/user as mob)
|
|
if(user.stat || stat & (NOPOWER|BROKEN))
|
|
return
|
|
|
|
user.machine = src
|
|
var/area/A = get_area(src)
|
|
ASSERT(isarea(A))
|
|
var/d1
|
|
var/d2
|
|
if (istype(user, /mob/living/carbon/human) || istype(user, /mob/living/silicon/ai))
|
|
|
|
if (A.party)
|
|
d1 = text("<A href='?src=\ref[];reset=1'>No Party :(</A>", src)
|
|
else
|
|
d1 = text("<A href='?src=\ref[];alarm=1'>PARTY!!!</A>", src)
|
|
if (timing)
|
|
d2 = text("<A href='?src=\ref[];time=0'>Stop Time Lock</A>", src)
|
|
else
|
|
d2 = text("<A href='?src=\ref[];time=1'>Initiate Time Lock</A>", src)
|
|
var/second = time % 60
|
|
var/minute = (time - second) / 60
|
|
var/dat = text("<HTML><HEAD></HEAD><BODY><TT><B>Party Button</B> []\n<HR>\nTimer System: []<BR>\nTime Left: [][] <A href='?src=\ref[];tp=-30'>-</A> <A href='?src=\ref[];tp=-1'>-</A> <A href='?src=\ref[];tp=1'>+</A> <A href='?src=\ref[];tp=30'>+</A>\n</TT></BODY></HTML>", d1, d2, (minute ? text("[]:", minute) : null), second, src, src, src, src)
|
|
user << browse(dat, "window=partyalarm")
|
|
onclose(user, "partyalarm")
|
|
else
|
|
if (A.fire)
|
|
d1 = text("<A href='?src=\ref[];reset=1'>[]</A>", src, stars("No Party :("))
|
|
else
|
|
d1 = text("<A href='?src=\ref[];alarm=1'>[]</A>", src, stars("PARTY!!!"))
|
|
if (timing)
|
|
d2 = text("<A href='?src=\ref[];time=0'>[]</A>", src, stars("Stop Time Lock"))
|
|
else
|
|
d2 = text("<A href='?src=\ref[];time=1'>[]</A>", src, stars("Initiate Time Lock"))
|
|
var/second = time % 60
|
|
var/minute = (time - second) / 60
|
|
var/dat = text("<HTML><HEAD></HEAD><BODY><TT><B>[]</B> []\n<HR>\nTimer System: []<BR>\nTime Left: [][] <A href='?src=\ref[];tp=-30'>-</A> <A href='?src=\ref[];tp=-1'>-</A> <A href='?src=\ref[];tp=1'>+</A> <A href='?src=\ref[];tp=30'>+</A>\n</TT></BODY></HTML>", stars("Party Button"), d1, d2, (minute ? text("[]:", minute) : null), second, src, src, src, src)
|
|
user << browse(dat, "window=partyalarm")
|
|
onclose(user, "partyalarm")
|
|
return
|
|
|
|
/obj/machinery/partyalarm/proc/reset()
|
|
if (!( working ))
|
|
return
|
|
var/area/A = get_area(src)
|
|
ASSERT(isarea(A))
|
|
A.partyreset()
|
|
return
|
|
|
|
/obj/machinery/partyalarm/proc/alarm()
|
|
if (!( working ))
|
|
return
|
|
var/area/A = get_area(src)
|
|
ASSERT(isarea(A))
|
|
A.partyalert()
|
|
return
|
|
|
|
/obj/machinery/partyalarm/Topic(href, href_list)
|
|
..()
|
|
if (usr.stat || stat & (BROKEN|NOPOWER))
|
|
return
|
|
if ((usr.contents.Find(src) || ((get_dist(src, usr) <= 1) && istype(loc, /turf))) || (istype(usr, /mob/living/silicon/ai)))
|
|
usr.machine = src
|
|
if (href_list["reset"])
|
|
reset()
|
|
else
|
|
if (href_list["alarm"])
|
|
alarm()
|
|
else
|
|
if (href_list["time"])
|
|
timing = text2num(href_list["time"])
|
|
else
|
|
if (href_list["tp"])
|
|
var/tp = text2num(href_list["tp"])
|
|
time += tp
|
|
time = min(max(round(time), 0), 120)
|
|
updateUsrDialog()
|
|
|
|
add_fingerprint(usr)
|
|
else
|
|
usr << browse(null, "window=partyalarm")
|
|
return
|
|
return
|