Subject: [PATCH 086/285] TG UPDATES:

- Simple event dispatch system.
- atom.forceMove() proc. Ignores density and other Move()restrictions, but calls Exited() and Entered()
- var/emagged moved to /obj/machinery class - anyprob() helper proc.
- Mecha internal damage varsencapsulated.
- Mech Fabricators now require robotics ID to operate. Emag removes this restriction.
- Added Odysseus Medical Exosuit and it's parts. Has integrated Medical Hud and ability to mount medical modules.
- Added Sleeper Medical module for medical exosuits. Similar to common sleepers, but no ability to inject reagents.
- Added Cable Layer module for exosuits. Load with cable (attack cable with it), activate, walk over dismantled floor.
- Added another exosuit internal damage type - short circuit. Short-circuited exosuits will drain powercell charge and power relay won't work.
- You should be able to send messages to exosuit operators using Exosuit Control Console
- Gygax armour and module capacity nerfed.
- Exosuit weapon recharge time raised.
- Bugfix: EMP actually drains exosuit cell and damages it

code/modules/power/apc.dm

@@ -47,7 +47,6 @@
 	var/light_consumption = 0 //not used
 	var/equip_consumption = 0 //not used
 	var/environ_consumption = 0 //not used
-	var/emagged = 0
 	var/wiresexposed = 0
 	var/apcwires = 15
 	netnum = -1		// set so that APCs aren't found as powernet nodes

code/modules/power/port_gen.dm

@@ -105,7 +105,6 @@ display round(lastgen) and plasmatank amount
 		board_path = "/obj/item/weapon/circuitboard/pacman"
 		coin_left = 0 // How much is left of the coin
 		time_per_coin = 1
-		emagged = 0
 		heat = 0
 
 	New()

code/modules/research/designs.dm

@@ -607,7 +607,7 @@ datum
 			req_tech = list("programming" = 3)
 			build_type = IMPRINTER
 			materials = list("$glass" = 2000, "acid" = 20)
-			build_path = "/obj/item/mecha_parts/circuitboard/ripley/main"
+			build_path = "/obj/item/weapon/circuitboard/mecha/ripley/main"
 
 		ripley_peri
 			name = "Circuit Design (APLU \"Ripley\" Peripherals Control module)"
@@ -616,7 +616,7 @@ datum
 			req_tech = list("programming" = 3)
 			build_type = IMPRINTER
 			materials = list("$glass" = 2000, "acid" = 20)
-			build_path = "/obj/item/mecha_parts/circuitboard/ripley/peripherals"
+			build_path = "/obj/item/weapon/circuitboard/mecha/ripley/peripherals"
 
 		gygax_main
 			name = "Circuit Design (\"Gygax\" Central Control module)"
@@ -625,7 +625,7 @@ datum
 			req_tech = list("programming" = 4)
 			build_type = IMPRINTER
 			materials = list("$glass" = 2000, "acid" = 20)
-			build_path = "/obj/item/mecha_parts/circuitboard/gygax/main"
+			build_path = "/obj/item/weapon/circuitboard/mecha/gygax/main"
 
 		gygax_peri
 			name = "Circuit Design (\"Gygax\" Peripherals Control module)"
@@ -634,7 +634,7 @@ datum
 			req_tech = list("programming" = 4)
 			build_type = IMPRINTER
 			materials = list("$glass" = 2000, "acid" = 20)
-			build_path = "/obj/item/mecha_parts/circuitboard/gygax/peripherals"
+			build_path = "/obj/item/weapon/circuitboard/mecha/gygax/peripherals"
 
 		gygax_targ
 			name = "Circuit Design (\"Gygax\" Weapons & Targeting Control module)"
@@ -643,7 +643,7 @@ datum
 			req_tech = list("programming" = 4, "combat" = 2)
 			build_type = IMPRINTER
 			materials = list("$glass" = 2000, "acid" = 20)
-			build_path = "/obj/item/mecha_parts/circuitboard/gygax/targeting"
+			build_path = "/obj/item/weapon/circuitboard/mecha/gygax/targeting"
 
 		durand_main
 			name = "Circuit Design (\"Durand\" Central Control module)"
@@ -652,7 +652,7 @@ datum
 			req_tech = list("programming" = 4)
 			build_type = IMPRINTER
 			materials = list("$glass" = 2000, "acid" = 20)
-			build_path = "/obj/item/mecha_parts/circuitboard/durand/main"
+			build_path = "/obj/item/weapon/circuitboard/mecha/durand/main"
 
 		durand_peri
 			name = "Circuit Design (\"Durand\" Peripherals Control module)"
@@ -661,7 +661,7 @@ datum
 			req_tech = list("programming" = 4)
 			build_type = IMPRINTER
 			materials = list("$glass" = 2000, "acid" = 20)
-			build_path = "/obj/item/mecha_parts/circuitboard/durand/peripherals"
+			build_path = "/obj/item/weapon/circuitboard/mecha/durand/peripherals"
 
 		durand_targ
 			name = "Circuit Design (\"Durand\" Weapons & Targeting Control module)"
@@ -670,7 +670,7 @@ datum
 			req_tech = list("programming" = 4, "combat" = 2)
 			build_type = IMPRINTER
 			materials = list("$glass" = 2000, "acid" = 20)
-			build_path = "/obj/item/mecha_parts/circuitboard/durand/targeting"
+			build_path = "/obj/item/weapon/circuitboard/mecha/durand/targeting"
 
 
 		honker_main
@@ -680,7 +680,7 @@ datum
 			req_tech = list("programming" = 3)
 			build_type = IMPRINTER
 			materials = list("$glass" = 2000, "acid" = 20)
-			build_path = "/obj/item/mecha_parts/circuitboard/honker/main"
+			build_path = "/obj/item/weapon/circuitboard/mecha/honker/main"
 
 		honker_peri
 			name = "Circuit Design (\"H.O.N.K\" Peripherals Control module)"
@@ -689,7 +689,7 @@ datum
 			req_tech = list("programming" = 3)
 			build_type = IMPRINTER
 			materials = list("$glass" = 2000, "acid" = 20)
-			build_path = "/obj/item/mecha_parts/circuitboard/honker/peripherals"
+			build_path = "/obj/item/weapon/circuitboard/mecha/honker/peripherals"
 
 		honker_targ
 			name = "Circuit Design (\"H.O.N.K\" Weapons & Targeting Control module)"
@@ -698,7 +698,7 @@ datum
 			req_tech = list("programming" = 3)
 			build_type = IMPRINTER
 			materials = list("$glass" = 2000, "acid" = 20)
-			build_path = "/obj/item/mecha_parts/circuitboard/honker/targeting"
+			build_path = "/obj/item/weapon/circuitboard/mecha/honker/targeting"
 
 ////////////////////////////////////////
 /////////// Mecha Equpment /////////////
@@ -768,14 +768,14 @@ datum
 			req_tech = list("bluespace" = 2, "magnets" = 3, "engineering" = 3)
 			build_path = "/obj/item/mecha_parts/mecha_equipment/gravcatapult"
 
-		/*mech_repair_droid
+		mech_repair_droid
 			name = "Exosuit Module Design (Repair Droid Module)"
 			desc = "Automated Repair Droid. BEEP BOOP"
 			id = "mech_repair_droid"
 			build_type = MECHFAB
 			req_tech = list("magnets" = 3, "programming" = 3, "engineering" = 3)
 			build_path = "/obj/item/mecha_parts/mecha_equipment/repair_droid"
-			*/
+
 		mech_plasma_generator
 			name = "Exosuit Module Design (Plasma Converter Module)"
 			desc = "Exosuit-mounted plasma converter."
@@ -784,6 +784,32 @@ datum
 			req_tech = list("plasmatech" = 2, "powerstorage"= 2, "engineering" = 2)
 			build_path = "/obj/item/mecha_parts/mecha_equipment/plasma_generator"
 
+		mech_energy_relay
+			name = "Exosuit Module Design (Tesla Energy Relay)"
+			desc = "Tesla Energy Relay"
+			id = "mech_energy_relay"
+			build_type = MECHFAB
+			req_tech = list("magnets" = 4, "syndicate" = 3)
+			build_path = "/obj/item/mecha_parts/mecha_equipment/tesla_energy_relay"
+
+		mech_ccw_armor
+			name = "Exosuit Module Design(Reactive Armor Booster Module)"
+			desc = "Exosuit-mounted armor booster."
+			id = "mech_ccw_armor"
+			build_type = MECHFAB
+			req_tech = list("materials" = 5, "combat" = 4)
+			build_path = "/obj/item/mecha_parts/mecha_equipment/anticcw_armor_booster"
+
+		mech_proj_armor
+			name = "Exosuit Module Design(Reflective Armor Booster Module)"
+			desc = "Exosuit-mounted armor booster."
+			id = "mech_proj_armor"
+			build_type = MECHFAB
+			req_tech = list("materials" = 5, "combat" = 5, "engineering"=3)
+			build_path = "/obj/item/mecha_parts/mecha_equipment/antiproj_armor_booster"
+
+
+
 ////////////////////////////////////////
 //////////Disk Construction Disks///////
 ////////////////////////////////////////