- Processing line (first item in list) will now show stack multiplier
where applicable
- Resources are taken before item is being created, to properly update
the UI
While browsing through my server's code looking for possible exploits to fix, i noticed the following :
The autolathe can be used to duplicate any and all objs.
The faulty code accepts any refID from the usr without a safetycheck to see if the requested obj is in the autolathe_recipes list.
This works "only" on objs because it will trigger a runtime error if the object has no material vars.
The default buildcost values for obj are zero, so it always goes through the materials-check, but it would not be sufficient to plug this exploit at this point.
The trivial fix is to have a check to see if the given refID is in the autolathe_recipes list, although a datum-based construction method would probably be more robust.
As basically identical autolathe code appears to be used in Baycode , /tg/, /vg/, Para, and all other builds i could look at, i assumed this exploit has been undetected since Goon.
And indeed, the faulty code is present in Gooncode rev4407 and has been ever since.
Fixes various minor issues here and there (including improper items for
chemistry repair), allows coloration of Tajaran, Unathi, and Skrell
hair+facial hair, and adds a few new food items.
More of these to come!
Uses sexy programmer-art sprites, if anybody feels for it, update them.
git-svn-id: http://tgstation13.googlecode.com/svn/trunk@5099 316c924e-a436-60f5-8080-3fe189b3f50e
Wizards can no longer cast spells when muzzled. Fixes issue 843.
You can no longer take bags of holding or mechs to the clown planet. Fixes issue 1061.
Removed the infared sensor from the autolathe construct list. Fixes issue 1092.
- The infared sensor already does nothing, the code for it seems to have been removed ages ago, so there's no harm in doing this.
- Commenting out the define caused a few problems that I couldn't quite figure out. I'll leave it for now with a warning.
Removed the ability for pAI's to set arrest status. Dead players really shouldn't be allowed to grief people like that. Fixes issue 1093.
git-svn-id: http://tgstation13.googlecode.com/svn/trunk@5060 316c924e-a436-60f5-8080-3fe189b3f50e
-New wraith sprites by TankNut!
-Decreased flare duration, again(!)
-Made a based interact proc and changed the updateDialog to call that instead of attack_hand. This caused issues with the APC and getting the power cell out of it. I then changed all machines that had their own defined proc (that was everywhere)
git-svn-id: http://tgstation13.googlecode.com/svn/trunk@5001 316c924e-a436-60f5-8080-3fe189b3f50e
-Atmos delay is now based on active players, to help fight lag for massive player rounds.
-Changed some for(blah in world) loops to use the correct lists.
git-svn-id: http://tgstation13.googlecode.com/svn/trunk@4958 316c924e-a436-60f5-8080-3fe189b3f50e
It will construct a camera after doing the following steps:
Wrench it to attach it to a wall
Weld it to the wall with a welding tool (Welding Helmet Required)
Attach wires to the camera
Possible extra steps in order to create special cameras (X-Ray, EMP Proof, Motion) (You can have more than 1 special attachment, meaning it can be possible to have an EMP Proof, Motion, X-Ray camera)
X-Ray will need carrots (something for botanists) (this will possibly changed, well it will definitely carrots are weird)
EMP Proof will need solid plasma.
Motion will need a prox sensor.
Screwdriver the panel closed to complete the camera.
To deconstruct the camera, it would be not so difficult to disable but it will take a while to completely remove it:
Screwdriver the panel open
Cut all the wires, cutting the alarm wire is optional.
Weld it.
It is now a camera assembly again.
Gave the cameras wires to cut/mend/pulse. Random wires for every camera to make hacking it harder.
Focus wire. Will make the camera have a shorter or normal vision range.
Power wire. Will disable the camera. Pulsing will make it kick anyone who is viewing it through a security computer. Will give a tiny shock if not protected.
Light wire. Will disable the "Toggle Camera Light" that the AI has. Pulsing it will disable/enable it.
Alarm wire. Will warn the AI that a camera's alarm has been set off, when this wire has been cut/pulsed. Does nothing else. Should only triggered once, meaning.. setting off the camera won't set it off ever again..
Special wire. Will toggle the special attachment of the camera. Pulse toggles, cutting disables, mending enables.
Nothing wire. Does nothing, just here to add more wires and make guessing which wire does which harder. x 3
Placed extra cameras, I can't recall all the places but here are some.
Around solar array entrances
Around EVA
Around the security back maintenance door
Place an X-Ray camera in the Living Quarters.
Bartender back room
Virology living quarters
Chapel crematory
A camera on the outside of Telecomm's external airlock
X-Ray camera outside every escape pod station.
Inbetween toxins test site and the station(?) There's cameras there already
Inbetween viro and medbay i think ^ I mean inside maintalright
private study? (library back room)
engineering secure storage
X-ray camera in toilets (both of them)
Both maintenance access that you find between important areas (captain room, teleporter room)(HoP office, staff meeting
Custodial Closet
Surgery Observation
Atmospherics Maintenance
Infront of Atmos
mining maintenance
Kitchen cold room
Hydroponics Storage
Emergency storage (both)
Other Map changes
Add red phone in Cyborg Station
Add AI restorer to Cyborg Station room
Added some camera assemblies in the Cyborg Station, inside a crate!
TODO:
Get camera alarms to give the AI a link to press, to jump there.
Standardize wires or something. There's a lot of copy+paste..
OTHER:
With the new camera stuff I got rid of the default x-ray cameras. Though there still are x-ray cameras placed around, watching you sleep.
Added Lugar223's improved vending interface. http://nanotrasen.com/phpBB3/viewtopic.php?f=16&t=9586
Some runtime fixes.
Added a second buffer for Cyborg cameras. Hopefully it'll make freelook less laggy.
Increased the first buffer to 2 seconds.
Some tweaking to stuff.
git-svn-id: http://tgstation13.googlecode.com/svn/trunk@4606 316c924e-a436-60f5-8080-3fe189b3f50e
All credits to the author for this handy little script.
I Committed the modified python script to tool directory. Although it needs to be in the root folder of your repo to work.
To notice the improved compile times, in dreammaker go to Build > Preferences > and untick "automatically set file_dir for subfolders"
If this commit inteferes with any large projects just revert it, do your thing, then rerun the script. Easy-peasy.
git-svn-id: http://tgstation13.googlecode.com/svn/trunk@4488 316c924e-a436-60f5-8080-3fe189b3f50e
Changed the path of large beakers, so they're actually a subtype of beaker (wtf)
Moved new_year.dm to unused.
Updated Carn's sequential master controller to not have tension stuff, for potential live testing.
git-svn-id: http://tgstation13.googlecode.com/svn/trunk@4444 316c924e-a436-60f5-8080-3fe189b3f50e
Replaced every l_hand = and r_hand = and all that if(hand) crap to use standardised procs. This means we can use procs like Dropped() reliably as they will always be called when things are dropped.
Thorough documentation to come. But generally, if you want a mob's icons to update after deleting something in the inventory...use drop_from_inventory(the_thing_you_wanna_drop) just before deleting it. If you wanna put something in a mob's hands use put_in_hands() (or one of the variants). It'll try putting it in active hand first, then inactive, then the floor. They handle layers, overlays, screenlocs calling various procs such as dropped() etc for you. Easy
mob.equipped() is now mob.get_active_hand() because there was another totally unrelated proc named equipped() and stuff was confusing.
Weakening was made instantaneous.
Minor optimisations for human/handle_regular_status_updates(). I'll port these changes over to the other mobs next. Basically it should stop it constantly incrementing every status effect even after death.
umm... bunch of overlays related fixes... I think that's everything. :/
git-svn-id: http://tgstation13.googlecode.com/svn/trunk@3900 316c924e-a436-60f5-8080-3fe189b3f50e
