mirror of
https://github.com/ParadiseSS13/Paradise.git
synced 2025-12-30 20:22:32 +00:00
1175 lines
38 KiB
Plaintext
1175 lines
38 KiB
Plaintext
#define APC_WIRE_IDSCAN 1
|
|
#define APC_WIRE_MAIN_POWER1 2
|
|
#define APC_WIRE_MAIN_POWER2 3
|
|
#define APC_WIRE_AI_CONTROL 4
|
|
|
|
#define APC_UPDATE_ICON_COOLDOWN 200 // 20 seconds
|
|
|
|
// the Area Power Controller (APC), formerly Power Distribution Unit (PDU)
|
|
// one per area, needs wire conection to power network
|
|
|
|
// controls power to devices in that area
|
|
// may be opened to change power cell
|
|
// three different channels (lighting/equipment/environ) - may each be set to on, off, or auto
|
|
|
|
|
|
//NOTE: STUFF STOLEN FROM AIRLOCK.DM thx
|
|
|
|
|
|
/obj/machinery/power/apc
|
|
name = "area power controller"
|
|
|
|
icon_state = "apc0"
|
|
anchored = 1
|
|
use_power = 0
|
|
req_access = list(access_engine_equip)
|
|
var/area/area
|
|
var/areastring = null
|
|
var/obj/item/weapon/cell/cell
|
|
var/start_charge = 90 // initial cell charge %
|
|
var/cell_type = 2500 // 0=no cell, 1=regular, 2=high-cap (x5) <- old, now it's just 0=no cell, otherwise dictate cellcapacity by changing this value. 1 used to be 1000, 2 was 2500
|
|
var/opened = 0 //0=closed, 1=opened, 2=cover removed
|
|
var/shorted = 0
|
|
var/lighting = 3
|
|
var/equipment = 3
|
|
var/environ = 3
|
|
var/operating = 1
|
|
var/charging = 0
|
|
var/chargemode = 1
|
|
var/chargecount = 0
|
|
var/locked = 1
|
|
var/coverlocked = 1
|
|
var/aidisabled = 0
|
|
var/tdir = null
|
|
var/obj/machinery/power/terminal/terminal = null
|
|
var/lastused_light = 0
|
|
var/lastused_equip = 0
|
|
var/lastused_environ = 0
|
|
var/lastused_total = 0
|
|
var/main_status = 0
|
|
var/wiresexposed = 0
|
|
powernet = 0 // set so that APCs aren't found as powernet nodes //Hackish, Horrible, was like this before I changed it :(
|
|
var/malfhack = 0 //New var for my changes to AI malf. --NeoFite
|
|
var/mob/living/silicon/ai/malfai = null //See above --NeoFite
|
|
// luminosity = 1
|
|
var/has_electronics = 0 // 0 - none, 1 - plugged in, 2 - secured by screwdriver
|
|
var/overload = 1 //used for the Blackout malf module
|
|
var/beenhit = 0 // used for counting how many times it has been hit, used for Aliens at the moment
|
|
var/mob/living/silicon/ai/occupant = null
|
|
var/longtermpower = 10
|
|
var/updating_icon = 0
|
|
var/datum/wires/apc/wires = null
|
|
//var/debug = 0
|
|
|
|
/obj/machinery/power/apc/updateDialog()
|
|
if (stat & (BROKEN|MAINT))
|
|
return
|
|
..()
|
|
|
|
/obj/machinery/power/apc/connect_to_network()
|
|
//Override because the APC does not directly connect to the network; it goes through a terminal.
|
|
//The terminal is what the power computer looks for anyway.
|
|
if(!terminal)
|
|
make_terminal()
|
|
if(terminal)
|
|
terminal.connect_to_network()
|
|
|
|
/obj/machinery/power/apc/New(turf/loc, var/ndir, var/building=0)
|
|
..()
|
|
wires = new(src)
|
|
// offset 24 pixels in direction of dir
|
|
// this allows the APC to be embedded in a wall, yet still inside an area
|
|
if (building)
|
|
dir = ndir
|
|
src.tdir = dir // to fix Vars bug
|
|
dir = SOUTH
|
|
|
|
pixel_x = (src.tdir & 3)? 0 : (src.tdir == 4 ? 24 : -24)
|
|
pixel_y = (src.tdir & 3)? (src.tdir ==1 ? 24 : -24) : 0
|
|
if (building==0)
|
|
init()
|
|
else
|
|
area = src.loc.loc:master
|
|
opened = 1
|
|
operating = 0
|
|
name = "[area.name] APC"
|
|
stat |= MAINT
|
|
src.update_icon()
|
|
spawn(5)
|
|
src.update()
|
|
|
|
|
|
|
|
/obj/machinery/power/apc/proc/make_terminal()
|
|
// create a terminal object at the same position as original turf loc
|
|
// wires will attach to this
|
|
terminal = new/obj/machinery/power/terminal(src.loc)
|
|
terminal.dir = tdir
|
|
terminal.master = src
|
|
|
|
/obj/machinery/power/apc/proc/init()
|
|
has_electronics = 2 //installed and secured
|
|
// is starting with a power cell installed, create it and set its charge level
|
|
if(cell_type)
|
|
src.cell = new/obj/item/weapon/cell(src)
|
|
cell.maxcharge = cell_type // cell_type is maximum charge (old default was 1000 or 2500 (values one and two respectively)
|
|
cell.charge = start_charge * cell.maxcharge / 100.0 // (convert percentage to actual value)
|
|
|
|
var/area/A = src.loc.loc
|
|
|
|
//if area isn't specified use current
|
|
if(isarea(A) && src.areastring == null)
|
|
src.area = A
|
|
else
|
|
src.area = get_area_name(areastring)
|
|
update_icon()
|
|
|
|
make_terminal()
|
|
|
|
spawn(5)
|
|
src.update()
|
|
|
|
/obj/machinery/power/apc/examine()
|
|
set src in oview(1)
|
|
|
|
if(usr /*&& !usr.stat*/)
|
|
usr << "A control terminal for the area electrical systems."
|
|
if(stat & BROKEN)
|
|
usr << "Looks broken."
|
|
return
|
|
if(opened)
|
|
if(has_electronics && terminal)
|
|
usr << "The cover is [opened==2?"removed":"open"] and the power cell is [ cell ? "installed" : "missing"]."
|
|
else if (!has_electronics && terminal)
|
|
usr << "There are some wires but no any electronics."
|
|
else if (has_electronics && !terminal)
|
|
usr << "Electronics installed but not wired."
|
|
else /* if (!has_electronics && !terminal) */
|
|
usr << "There is no electronics nor connected wires."
|
|
|
|
else
|
|
if (stat & MAINT)
|
|
usr << "The cover is closed. Something wrong with it: it doesn't work."
|
|
else if (malfhack)
|
|
usr << "The cover is broken. It may be hard to force it open."
|
|
else
|
|
usr << "The cover is closed."
|
|
|
|
|
|
// update the APC icon to show the three base states
|
|
// also add overlays for indicator lights
|
|
/obj/machinery/power/apc/update_icon()
|
|
|
|
overlays.Cut()
|
|
if(opened)
|
|
var/basestate = "apc[ cell ? "2" : "1" ]" // if opened, show cell if it's inserted
|
|
if (opened==1)
|
|
if (stat & (MAINT|BROKEN))
|
|
icon_state = "apcmaint" //disassembled APC cannot hold cell
|
|
else
|
|
icon_state = basestate
|
|
else if (opened == 2)
|
|
if ((stat & BROKEN) || malfhack )
|
|
icon_state = "[basestate]-b-nocover"
|
|
else /* if (emagged)*/
|
|
icon_state = "[basestate]-nocover"
|
|
else if (stat & BROKEN)
|
|
icon_state = "apc-b"
|
|
else if(emagged || malfai)
|
|
icon_state = "apcemag"
|
|
else if(wiresexposed)
|
|
icon_state = "apcewires"
|
|
else
|
|
icon_state = "apc0"
|
|
// if closed, update overlays for channel status
|
|
if(!(stat & (BROKEN|MAINT)))
|
|
overlays.Add("apcox-[locked]","apco3-[charging]") // 0=blue 1=red // 0=red, 1=yellow/black 2=green
|
|
if(operating)
|
|
overlays.Add("apco0-[equipment]","apco1-[lighting]","apco2-[environ]") // 0=red, 1=green, 2=blue
|
|
|
|
// Used in process so it doesn't update the icon too much
|
|
/obj/machinery/power/apc/proc/queue_icon_update()
|
|
|
|
if(!updating_icon)
|
|
updating_icon = 1
|
|
// Start the update
|
|
spawn(APC_UPDATE_ICON_COOLDOWN)
|
|
update_icon()
|
|
updating_icon = 0
|
|
|
|
//attack with an item - open/close cover, insert cell, or (un)lock interface
|
|
|
|
/obj/machinery/power/apc/attackby(obj/item/W, mob/user)
|
|
|
|
if (istype(user, /mob/living/silicon) && get_dist(src,user)>1)
|
|
return src.attack_hand(user)
|
|
if (istype(W, /obj/item/weapon/crowbar) && opened)
|
|
if (has_electronics==1)
|
|
if (terminal)
|
|
user << "\red Disconnect wires first."
|
|
return
|
|
playsound(src.loc, 'sound/items/Crowbar.ogg', 50, 1)
|
|
user << "You are trying to remove the power control board..." //lpeters - fixed grammar issues
|
|
if(do_after(user, 50))
|
|
has_electronics = 0
|
|
if ((stat & BROKEN) || malfhack)
|
|
user.visible_message(\
|
|
"\red [user.name] has broken the power control board inside [src.name]!",\
|
|
"You broke the charred power control board and remove the remains.",
|
|
"You hear a crack!")
|
|
//ticker.mode:apcs-- //XSI said no and I agreed. -rastaf0
|
|
else
|
|
user.visible_message(\
|
|
"\red [user.name] has removed the power control board from [src.name]!",\
|
|
"You remove the power control board.")
|
|
new /obj/item/weapon/module/power_control(loc)
|
|
else if (opened!=2) //cover isn't removed
|
|
opened = 0
|
|
update_icon()
|
|
else if (istype(W, /obj/item/weapon/crowbar) && !((stat & BROKEN) || malfhack) )
|
|
if(coverlocked && !(stat & MAINT))
|
|
user << "\red The cover is locked and cannot be opened."
|
|
return
|
|
else
|
|
opened = 1
|
|
update_icon()
|
|
else if (istype(W, /obj/item/weapon/cell) && opened) // trying to put a cell inside
|
|
if(cell)
|
|
user << "There is a power cell already installed."
|
|
return
|
|
else
|
|
if (stat & MAINT)
|
|
user << "\red There is no connector for your power cell."
|
|
return
|
|
user.drop_item()
|
|
W.loc = src
|
|
cell = W
|
|
user.visible_message(\
|
|
"\red [user.name] has inserted the power cell to [src.name]!",\
|
|
"You insert the power cell.")
|
|
chargecount = 0
|
|
update_icon()
|
|
else if (istype(W, /obj/item/weapon/screwdriver)) // haxing
|
|
if(opened)
|
|
if (cell)
|
|
user << "\red Close the APC first." //Less hints more mystery!
|
|
return
|
|
else
|
|
if (has_electronics==1 && terminal)
|
|
has_electronics = 2
|
|
stat &= ~MAINT
|
|
playsound(src.loc, 'sound/items/Screwdriver.ogg', 50, 1)
|
|
user << "You screw the circuit electronics into place."
|
|
else if (has_electronics==2)
|
|
has_electronics = 1
|
|
stat |= MAINT
|
|
playsound(src.loc, 'sound/items/Screwdriver.ogg', 50, 1)
|
|
user << "You unfasten the electronics."
|
|
else /* has_electronics==0 */
|
|
user << "\red There is nothing to secure."
|
|
return
|
|
update_icon()
|
|
else if(emagged)
|
|
user << "The interface is broken."
|
|
else
|
|
wiresexposed = !wiresexposed
|
|
user << "The wires have been [wiresexposed ? "exposed" : "unexposed"]"
|
|
update_icon()
|
|
|
|
else if (istype(W, /obj/item/weapon/card/id)||istype(W, /obj/item/device/pda)) // trying to unlock the interface with an ID card
|
|
if(emagged)
|
|
user << "The interface is broken."
|
|
else if(opened)
|
|
user << "You must close the cover to swipe an ID card."
|
|
else if(wiresexposed)
|
|
user << "You must close the panel"
|
|
else if(stat & (BROKEN|MAINT))
|
|
user << "Nothing happens."
|
|
else
|
|
if(src.allowed(usr) && !isWireCut(APC_WIRE_IDSCAN))
|
|
locked = !locked
|
|
user << "You [ locked ? "lock" : "unlock"] the APC interface."
|
|
update_icon()
|
|
else
|
|
user << "\red Access denied."
|
|
else if (istype(W, /obj/item/weapon/card/emag) && !(emagged || malfhack)) // trying to unlock with an emag card
|
|
if(opened)
|
|
user << "You must close the cover to swipe an ID card."
|
|
else if(wiresexposed)
|
|
user << "You must close the panel first"
|
|
else if(stat & (BROKEN|MAINT))
|
|
user << "Nothing happens."
|
|
else
|
|
flick("apc-spark", src)
|
|
if (do_after(user,6))
|
|
if(prob(50))
|
|
emagged = 1
|
|
locked = 0
|
|
user << "You emag the APC interface."
|
|
update_icon()
|
|
else
|
|
user << "You fail to [ locked ? "unlock" : "lock"] the APC interface."
|
|
else if (istype(W, /obj/item/weapon/cable_coil) && !terminal && opened && has_electronics!=2)
|
|
if (src.loc:intact)
|
|
user << "\red You must remove the floor plating in front of the APC first."
|
|
return
|
|
var/obj/item/weapon/cable_coil/C = W
|
|
if(C.amount < 10)
|
|
user << "\red You need more wires."
|
|
return
|
|
user << "You start adding cables to the APC frame..."
|
|
playsound(src.loc, 'sound/items/Deconstruct.ogg', 50, 1)
|
|
if(do_after(user, 20) && C.amount >= 10)
|
|
var/turf/T = get_turf(src)
|
|
var/obj/structure/cable/N = T.get_cable_node()
|
|
if (prob(50) && electrocute_mob(usr, N, N))
|
|
var/datum/effect/effect/system/spark_spread/s = new /datum/effect/effect/system/spark_spread
|
|
s.set_up(5, 1, src)
|
|
s.start()
|
|
return
|
|
C.use(10)
|
|
user.visible_message(\
|
|
"\red [user.name] has added cables to the APC frame!",\
|
|
"You add cables to the APC frame.")
|
|
make_terminal()
|
|
terminal.connect_to_network()
|
|
else if (istype(W, /obj/item/weapon/wirecutters) && terminal && opened && has_electronics!=2)
|
|
if (src.loc:intact)
|
|
user << "\red You must remove the floor plating in front of the APC first."
|
|
return
|
|
user << "You begin to cut the cables..."
|
|
playsound(src.loc, 'sound/items/Deconstruct.ogg', 50, 1)
|
|
if(do_after(user, 50))
|
|
if (prob(50) && electrocute_mob(usr, terminal.powernet, terminal))
|
|
var/datum/effect/effect/system/spark_spread/s = new /datum/effect/effect/system/spark_spread
|
|
s.set_up(5, 1, src)
|
|
s.start()
|
|
return
|
|
new /obj/item/weapon/cable_coil(loc,10)
|
|
user.visible_message(\
|
|
"\red [user.name] cut the cables and dismantled the power terminal.",\
|
|
"You cut the cables and dismantle the power terminal.")
|
|
del(terminal)
|
|
else if (istype(W, /obj/item/weapon/module/power_control) && opened && has_electronics==0 && !((stat & BROKEN) || malfhack))
|
|
user << "You trying to insert the power control board into the frame..."
|
|
playsound(src.loc, 'sound/items/Deconstruct.ogg', 50, 1)
|
|
if(do_after(user, 10))
|
|
has_electronics = 1
|
|
user << "You place the power control board inside the frame."
|
|
del(W)
|
|
else if (istype(W, /obj/item/weapon/module/power_control) && opened && has_electronics==0 && ((stat & BROKEN) || malfhack))
|
|
user << "\red You cannot put the board inside, the frame is damaged."
|
|
return
|
|
else if (istype(W, /obj/item/weapon/weldingtool) && opened && has_electronics==0 && !terminal)
|
|
var/obj/item/weapon/weldingtool/WT = W
|
|
if (WT.get_fuel() < 3)
|
|
user << "\blue You need more welding fuel to complete this task."
|
|
return
|
|
user << "You start welding the APC frame..."
|
|
playsound(src.loc, 'sound/items/Welder.ogg', 50, 1)
|
|
if(do_after(user, 50))
|
|
if(!src || !WT.remove_fuel(3, user)) return
|
|
if (emagged || malfhack || (stat & BROKEN) || opened==2)
|
|
new /obj/item/stack/sheet/metal(loc)
|
|
user.visible_message(\
|
|
"\red [src] has been cut apart by [user.name] with the weldingtool.",\
|
|
"You disassembled the broken APC frame.",\
|
|
"\red You hear welding.")
|
|
else
|
|
new /obj/item/apc_frame(loc)
|
|
user.visible_message(\
|
|
"\red [src] has been cut from the wall by [user.name] with the weldingtool.",\
|
|
"You cut the APC frame from the wall.",\
|
|
"\red You hear welding.")
|
|
del(src)
|
|
return
|
|
else if (istype(W, /obj/item/apc_frame) && opened && emagged)
|
|
emagged = 0
|
|
if (opened==2)
|
|
opened = 1
|
|
user.visible_message(\
|
|
"\red [user.name] has replaced the damaged APC frontal panel with a new one.",\
|
|
"You replace the damaged APC frontal panel with a new one.")
|
|
del(W)
|
|
update_icon()
|
|
else if (istype(W, /obj/item/apc_frame) && opened && ((stat & BROKEN) || malfhack))
|
|
if (has_electronics)
|
|
user << "You cannot repair this APC until you remove the electronics still inside."
|
|
return
|
|
user << "You begin to replace the damaged APC frame..."
|
|
if(do_after(user, 50))
|
|
user.visible_message(\
|
|
"\red [user.name] has replaced the damaged APC frame with new one.",\
|
|
"You replace the damaged APC frame with new one.")
|
|
del(W)
|
|
stat &= ~BROKEN
|
|
malfai = null
|
|
malfhack = 0
|
|
if (opened==2)
|
|
opened = 1
|
|
update_icon()
|
|
else
|
|
if ( ((stat & BROKEN) || malfhack) \
|
|
&& !opened \
|
|
&& W.force >= 5 \
|
|
&& W.w_class >= 3.0 \
|
|
&& prob(20) )
|
|
opened = 2
|
|
user.visible_message("\red The APC cover was knocked down with the [W.name] by [user.name]!", \
|
|
"\red You knock down the APC cover with your [W.name]!", \
|
|
"You hear bang")
|
|
update_icon()
|
|
else
|
|
if (istype(user, /mob/living/silicon))
|
|
return src.attack_hand(user)
|
|
if (!opened && wiresexposed && \
|
|
(istype(W, /obj/item/device/multitool) || \
|
|
istype(W, /obj/item/weapon/wirecutters) || istype(W, /obj/item/device/assembly/signaler)))
|
|
return src.attack_hand(user)
|
|
user.visible_message("\red The [src.name] has been hit with the [W.name] by [user.name]!", \
|
|
"\red You hit the [src.name] with your [W.name]!", \
|
|
"You hear bang")
|
|
|
|
// attack with hand - remove cell (if cover open) or interact with the APC
|
|
|
|
/obj/machinery/power/apc/attack_hand(mob/user)
|
|
// if (!can_use(user)) This already gets called in interact() and in topic()
|
|
// return
|
|
if(!user)
|
|
return
|
|
src.add_fingerprint(user)
|
|
if(usr == user && opened && (!issilicon(user)))
|
|
if(cell)
|
|
user.put_in_hands(cell)
|
|
cell.add_fingerprint(user)
|
|
cell.updateicon()
|
|
|
|
src.cell = null
|
|
user.visible_message("\red [user.name] removes the power cell from [src.name]!", "You remove the power cell.")
|
|
//user << "You remove the power cell."
|
|
charging = 0
|
|
src.update_icon()
|
|
return
|
|
if(stat & (BROKEN|MAINT))
|
|
return
|
|
// do APC interaction
|
|
user.set_machine(src)
|
|
src.interact(user)
|
|
|
|
/obj/machinery/power/apc/attack_alien(mob/living/carbon/alien/humanoid/user)
|
|
if(!user)
|
|
return
|
|
user.visible_message("\red [user.name] slashes at the [src.name]!", "\blue You slash at the [src.name]!")
|
|
playsound(src.loc, 'sound/weapons/slash.ogg', 100, 1)
|
|
|
|
var/allcut = wires.IsAllCut()
|
|
|
|
if(beenhit >= pick(3, 4) && wiresexposed != 1)
|
|
wiresexposed = 1
|
|
src.update_icon()
|
|
src.visible_message("\red The [src.name]'s cover flies open, exposing the wires!")
|
|
|
|
else if(wiresexposed == 1 && allcut == 0)
|
|
wires.CutAll()
|
|
src.update_icon()
|
|
src.visible_message("\red The [src.name]'s wires are shredded!")
|
|
else
|
|
beenhit += 1
|
|
return
|
|
|
|
|
|
/obj/machinery/power/apc/interact(mob/user)
|
|
if(!user)
|
|
return
|
|
|
|
if(wiresexposed /*&& (!istype(user, /mob/living/silicon))*/) //Commented out the typecheck to allow engiborgs to repair damaged apcs.
|
|
wires.Interact(user)
|
|
|
|
user.set_machine(src)
|
|
var/t = "" //"<B>Area Power Controller</B> ([area.name])"
|
|
|
|
//This goes after the wire stuff. They should be able to fix a physical problem when a wire is cut
|
|
if ( (get_dist(src, user) > 1 ))
|
|
if (!issilicon(user))
|
|
user.unset_machine()
|
|
user << browse(null, "window=apc")
|
|
return
|
|
else if (issilicon(user) && src.aidisabled && !src.malfhack)
|
|
user << "AI control for this APC interface has been disabled."
|
|
user.unset_machine()
|
|
user << browse(null, "window=apc")
|
|
return
|
|
else if (src.malfai && isAI(user))
|
|
var/mob/living/silicon/ai/AI = user
|
|
if ((src.malfai != AI && src.malfai != AI.parent) && !islinked(AI, malfai))
|
|
user << "AI control for this APC interface has been disabled."
|
|
user.unset_machine()
|
|
user << browse(null, "window=apc")
|
|
return
|
|
|
|
|
|
if(locked && (!istype(user, /mob/living/silicon)))
|
|
t += "<div class='notice icon'>Swipe ID card to unlock interface</div>"
|
|
t += "<h3>Status</h3>"
|
|
t += "Main Breaker: <B>[operating ? "<font class='good'>On</font>" : "<font class='bad'>Off</font>"]</B><br />"
|
|
t += "External Power: <B>[ main_status ? (main_status ==2 ? "<font class='good'>Good</font>" : "<font class='average'>Low</font>") : "<font class='bad'>None</font>"]</B><br />"
|
|
t += "Power Cell: <B>[cell ? "[round(cell.percent())]%" : "<font COLOR=red>Not connected.</font>"]</B>"
|
|
if(cell)
|
|
t += "<BR/>Charge Mode: [chargemode ? "Auto" : "Off"]"
|
|
t += " ([charging ? ( charging == 1 ? "Charging" : "Fully charged" ) : "Not charging"])"
|
|
|
|
t += "<h3>Power Channels</h3><PRE>"
|
|
|
|
var/list/L = list ("Off","Off (Auto)", "On", "On (Auto)")
|
|
|
|
t += "Equipment: [add_lspace(lastused_equip, 6)] W : <B>[L[equipment+1]]</B><br />"
|
|
t += "Lighting: [add_lspace(lastused_light, 6)] W : <B>[L[lighting+1]]</B><br />"
|
|
t += "Environmental:[add_lspace(lastused_environ, 6)] W : <B>[L[environ+1]]</B><br />"
|
|
|
|
t += "<br />Total Load: [lastused_light + lastused_equip + lastused_environ] W</PRE>"
|
|
t += "<br />Cover Lock: <B>[coverlocked ? "Engaged" : "Disengaged"]</B>"
|
|
|
|
else
|
|
if (!istype(user, /mob/living/silicon))
|
|
t += "<div class='notice icon'>Swipe ID card to lock interface</div>"
|
|
t += "<h3>Status</h3>"
|
|
t += "Main Breaker: [operating ? "<span class='linkOn'>On</span> <A href='?src=\ref[src];breaker=1'>Off</A>" : "<A href='?src=\ref[src];breaker=1'>On</A> <span class='linkOn'>Off</span>" ]<br />"
|
|
t += "External power : <B>[ main_status ? (main_status ==2 ? "<font class='good'>Good</font>" : "<font class='average'>Low</font>") : "<font class='bad'>None</font>"]</B><br />"
|
|
if(cell)
|
|
t += "Power cell: <B>[round(cell.percent())]%</B>"
|
|
t += "<BR/>Charge mode: [chargemode ? "<A href='?src=\ref[src];cmode=1'>Off</A> <span class='linkOn'>Auto</span>" : "<span class='linkOn'>Off</span> <A href='?src=\ref[src];cmode=1'>Auto</A>"]"
|
|
t += " ([charging ? ( charging == 1 ? "Charging" : "Fully charged" ) : "Not charging"])"
|
|
else
|
|
t += "Power cell: <B><font COLOR=red>Not connected.</font></B>"
|
|
|
|
t += "<br /><h3>Power channels</h3><PRE>"
|
|
|
|
t += "Equipment: [add_lspace(lastused_equip, 6)] W : "
|
|
var/key = "eqp"
|
|
switch(equipment)
|
|
if(0)
|
|
t += "<span class='linkOn'>Off</span> <A href='?src=\ref[src];[key]=2'>On</A> <A href='?src=\ref[src];[key]=3'>Auto</A>"
|
|
if(1)
|
|
t += "<A href='?src=\ref[src];[key]=1'>Off</A> <A href='?src=\ref[src];[key]=2'>On</A> <span class='linkOn'>Auto (Off)</span>"
|
|
if(2)
|
|
t += "<A href='?src=\ref[src];[key]=1'>Off</A> <span class='linkOn'>On</span> <A href='?src=\ref[src];[key]=3'>Auto</A>"
|
|
if(3)
|
|
t += "<A href='?src=\ref[src];[key]=1'>Off</A> <A href='?src=\ref[src];[key]=2'>On</A> <span class='linkOn'>Auto (On)</span>"
|
|
t +="<br />"
|
|
|
|
t += "Lighting: [add_lspace(lastused_light, 6)] W : "
|
|
key = "lgt"
|
|
switch(lighting)
|
|
if(0)
|
|
t += "<span class='linkOn'>Off</span> <A href='?src=\ref[src];[key]=2'>On</A> <A href='?src=\ref[src];[key]=3'>Auto</A>"
|
|
if(1)
|
|
t += "<A href='?src=\ref[src];[key]=1'>Off</A> <A href='?src=\ref[src];[key]=2'>On</A> <span class='linkOn'>Auto (Off)</span>"
|
|
if(2)
|
|
t += "<A href='?src=\ref[src];[key]=1'>Off</A> <span class='linkOn'>On</span> <A href='?src=\ref[src];[key]=3'>Auto</A>"
|
|
if(3)
|
|
t += "<A href='?src=\ref[src];[key]=1'>Off</A> <A href='?src=\ref[src];[key]=2'>On</A> <span class='linkOn'>Auto (On)</span>"
|
|
t +="<br />"
|
|
|
|
|
|
t += "Environmental:[add_lspace(lastused_environ, 6)] W : "
|
|
key = "env"
|
|
switch(environ)
|
|
if(0)
|
|
t += "<span class='linkOn'>Off</span> <A href='?src=\ref[src];[key]=2'>On</A> <A href='?src=\ref[src];[key]=3'>Auto</A>"
|
|
if(1)
|
|
t += "<A href='?src=\ref[src];[key]=1'>Off</A> <A href='?src=\ref[src];[key]=2'>On</A> <span class='linkOn'>Auto (Off)</span>"
|
|
if(2)
|
|
t += "<A href='?src=\ref[src];[key]=1'>Off</A> <span class='linkOn'>On</span> <A href='?src=\ref[src];[key]=3'>Auto</A>"
|
|
if(3)
|
|
t += "<A href='?src=\ref[src];[key]=1'>Off</A> <A href='?src=\ref[src];[key]=2'>On</A> <span class='linkOn'>Auto (On)</span>"
|
|
|
|
|
|
|
|
t += "<br />Total Load: [lastused_light + lastused_equip + lastused_environ] W</PRE>"
|
|
t += "<br />Cover Lock: [coverlocked ? "<B><A href='?src=\ref[src];lock=1'>Engaged</A></B>" : "<B><A href='?src=\ref[src];lock=1'>Disengaged</A></B>"]"
|
|
|
|
|
|
if (istype(user, /mob/living/silicon))
|
|
t += "<br /><A href='?src=\ref[src];overload=1'><I>Overload lighting circuit</I></A><br />"
|
|
if (ticker && ticker.mode)
|
|
// world << "there's a ticker"
|
|
if(user.mind in ticker.mode.malf_ai)
|
|
// world << "ticker says its malf"
|
|
if (!src.malfai)
|
|
t += "<br /><A href='?src=\ref[src];malfhack=1'><I>Override Programming</I></A><br />"
|
|
else
|
|
t += "<br /><I>APC Hacked</I><br />"
|
|
if(!src.occupant)
|
|
t += "<A href='?src=\ref[src];occupyapc=1'><I>Shunt Core Processes</I></A><br />"
|
|
else
|
|
t += "<I>Core Processes Uploaded</I><br />"
|
|
|
|
//t += "<br /><HR><A href='?src=\ref[src];close=1'>Close</A>"
|
|
|
|
//user << browse(t, "window=apc")
|
|
//onclose(user, "apc")
|
|
var/datum/browser/popup = new(user, "apc", "[area.name] APC")
|
|
popup.set_content(t)
|
|
popup.set_title_image(user.browse_rsc_icon(src.icon, src.icon_state))
|
|
popup.open()
|
|
return
|
|
|
|
/obj/machinery/power/apc/proc/report()
|
|
return "[area.name] : [equipment]/[lighting]/[environ] ([lastused_equip+lastused_light+lastused_environ]) : [cell? cell.percent() : "N/C"] ([charging])"
|
|
|
|
/obj/machinery/power/apc/proc/update()
|
|
if(operating && !shorted)
|
|
area.power_light = (lighting > 1)
|
|
area.power_equip = (equipment > 1)
|
|
area.power_environ = (environ > 1)
|
|
// if (area.name == "AI Chamber")
|
|
// spawn(10)
|
|
// world << " [area.name] [area.power_equip]"
|
|
else
|
|
area.power_light = 0
|
|
area.power_equip = 0
|
|
area.power_environ = 0
|
|
// if (area.name == "AI Chamber")
|
|
// world << "[area.power_equip]"
|
|
area.power_change()
|
|
|
|
/obj/machinery/power/apc/proc/isWireCut(var/wireIndex)
|
|
return wires.IsIndexCut(wireIndex)
|
|
|
|
|
|
/obj/machinery/power/apc/proc/can_use(mob/user as mob, var/loud = 0) //used by attack_hand() and Topic()
|
|
if (user.stat)
|
|
user << "\red You must be conscious to use this [src]!"
|
|
return 0
|
|
if(!user.client)
|
|
return 0
|
|
if ( ! (istype(user, /mob/living/carbon/human) || \
|
|
istype(user, /mob/living/silicon) || \
|
|
istype(user, /mob/living/carbon/monkey) /*&& ticker && ticker.mode.name == "monkey"*/) )
|
|
user << "\red You don't have the dexterity to use this [src]!"
|
|
user << browse(null, "window=apc")
|
|
user.unset_machine()
|
|
return 0
|
|
if(user.restrained())
|
|
user << "\red You must have free hands to use this [src]"
|
|
return 0
|
|
if(user.lying)
|
|
user << "\red You must stand to use this [src]!"
|
|
return 0
|
|
if (istype(user, /mob/living/silicon))
|
|
var/mob/living/silicon/ai/AI = user
|
|
var/mob/living/silicon/robot/robot = user
|
|
if ( \
|
|
src.aidisabled || \
|
|
malfhack && istype(malfai) && \
|
|
( \
|
|
(istype(AI) && (malfai!=AI && malfai != AI.parent)) || \
|
|
(istype(robot) && (robot in malfai.connected_robots)) \
|
|
) \
|
|
)
|
|
if(!loud)
|
|
user << "\red \The [src] have AI control disabled!"
|
|
user << browse(null, "window=apc")
|
|
user.unset_machine()
|
|
return 0
|
|
else
|
|
if ((!in_range(src, user) || !istype(src.loc, /turf)))
|
|
user << browse(null, "window=apc")
|
|
user.unset_machine()
|
|
return 0
|
|
|
|
var/mob/living/carbon/human/H = user
|
|
if (istype(H))
|
|
if(H.getBrainLoss() >= 60)
|
|
for(var/mob/M in viewers(src, null))
|
|
M << "\red [H] stares cluelessly at [src] and drools."
|
|
return 0
|
|
else if(prob(H.getBrainLoss()))
|
|
user << "\red You momentarily forget how to use [src]."
|
|
return 0
|
|
return 1
|
|
|
|
/obj/machinery/power/apc/Topic(href, href_list)
|
|
if(..())
|
|
return
|
|
|
|
if(!isrobot(usr))
|
|
if(!can_use(usr, 1))
|
|
return
|
|
|
|
usr.set_machine(src)
|
|
|
|
if (href_list["lock"])
|
|
coverlocked = !coverlocked
|
|
|
|
else if (href_list["breaker"])
|
|
toggle_breaker()
|
|
|
|
else if (href_list["cmode"])
|
|
chargemode = !chargemode
|
|
if(!chargemode)
|
|
charging = 0
|
|
update_icon()
|
|
|
|
else if (href_list["eqp"])
|
|
var/val = text2num(href_list["eqp"])
|
|
|
|
equipment = setsubsystem(val)
|
|
update_icon()
|
|
update()
|
|
|
|
else if (href_list["lgt"])
|
|
var/val = text2num(href_list["lgt"])
|
|
|
|
lighting = setsubsystem(val)
|
|
update_icon()
|
|
update()
|
|
|
|
else if (href_list["env"])
|
|
var/val = text2num(href_list["env"])
|
|
|
|
environ = setsubsystem(val)
|
|
update_icon()
|
|
update()
|
|
|
|
else if( href_list["close"] )
|
|
usr << browse(null, "window=apc")
|
|
usr.unset_machine()
|
|
return
|
|
else if (href_list["close2"])
|
|
usr << browse(null, "window=apcwires")
|
|
usr.unset_machine()
|
|
return
|
|
|
|
else if (href_list["overload"])
|
|
if( istype(usr, /mob/living/silicon) && !src.aidisabled )
|
|
src.overload_lighting()
|
|
|
|
else if (href_list["malfhack"])
|
|
var/mob/living/silicon/ai/malfai = usr
|
|
if( istype(malfai, /mob/living/silicon/ai) && !src.aidisabled )
|
|
if (malfai.malfhacking)
|
|
malfai << "You are already hacking an APC."
|
|
return
|
|
malfai << "Beginning override of APC systems. This takes some time, and you cannot perform other actions during the process."
|
|
malfai.malfhack = src
|
|
malfai.malfhacking = 1
|
|
sleep(600)
|
|
if(src)
|
|
if (!src.aidisabled)
|
|
malfai.malfhack = null
|
|
malfai.malfhacking = 0
|
|
if (ticker.mode.config_tag == "malfunction")
|
|
if (src.z == 1) //if (is_type_in_list(get_area(src), the_station_areas))
|
|
ticker.mode:apcs++
|
|
if(usr:parent)
|
|
src.malfai = usr:parent
|
|
else
|
|
src.malfai = usr
|
|
malfai << "Hack complete. The APC is now under your exclusive control."
|
|
update_icon()
|
|
|
|
else if (href_list["occupyapc"])
|
|
malfoccupy(usr)
|
|
|
|
else if (href_list["deoccupyapc"])
|
|
malfvacate()
|
|
|
|
src.updateDialog()
|
|
|
|
return
|
|
|
|
/obj/machinery/power/apc/proc/toggle_breaker()
|
|
operating = !operating
|
|
|
|
if(malfai)
|
|
if (ticker.mode.config_tag == "malfunction")
|
|
if (src.z == 1) //if (is_type_in_list(get_area(src), the_station_areas))
|
|
operating ? ticker.mode:apcs++ : ticker.mode:apcs--
|
|
|
|
src.update()
|
|
update_icon()
|
|
|
|
/obj/machinery/power/apc/proc/malfoccupy(var/mob/living/silicon/ai/malf)
|
|
if(!istype(malf))
|
|
return
|
|
if(istype(malf.loc, /obj/machinery/power/apc)) // Already in an APC
|
|
malf << "<span class='warning'>You must evacuate your current apc first.</span>"
|
|
return
|
|
if(!malf.can_shunt)
|
|
malf << "<span class='warning'>You cannot shunt.</span>"
|
|
return
|
|
if(src.z != 1)
|
|
return
|
|
src.occupant = new /mob/living/silicon/ai(src,malf.laws,null,1)
|
|
src.occupant.adjustOxyLoss(malf.getOxyLoss())
|
|
if(!findtext(src.occupant.name,"APC Copy"))
|
|
src.occupant.name = "[malf.name] APC Copy"
|
|
if(malf.parent)
|
|
src.occupant.parent = malf.parent
|
|
else
|
|
src.occupant.parent = malf
|
|
malf.mind.transfer_to(src.occupant)
|
|
src.occupant.eyeobj.name = "[src.occupant.name] (AI Eye)"
|
|
if(malf.parent)
|
|
del(malf)
|
|
src.occupant.verbs += /mob/living/silicon/ai/proc/corereturn
|
|
src.occupant.verbs += /datum/game_mode/malfunction/proc/takeover
|
|
src.occupant.cancel_camera()
|
|
|
|
for(var/obj/item/weapon/pinpointer/point in world)
|
|
point.the_disk = src //the pinpointer will detect the shunted AI
|
|
|
|
|
|
/obj/machinery/power/apc/proc/malfvacate(var/forced)
|
|
if(!src.occupant)
|
|
return
|
|
if(src.occupant.parent && src.occupant.parent.stat != 2)
|
|
src.occupant.mind.transfer_to(src.occupant.parent)
|
|
src.occupant.parent.adjustOxyLoss(src.occupant.getOxyLoss())
|
|
src.occupant.parent.cancel_camera()
|
|
del(src.occupant)
|
|
|
|
else
|
|
src.occupant << "\red Primary core damaged, unable to return core processes."
|
|
if(forced)
|
|
src.occupant.loc = src.loc
|
|
src.occupant.death()
|
|
src.occupant.gib()
|
|
|
|
for(var/obj/item/weapon/pinpointer/point in world)
|
|
point.the_disk = null //the pinpointer will go back to pointing at the nuke disc.
|
|
|
|
|
|
/obj/machinery/power/apc/proc/ion_act()
|
|
//intended to be exactly the same as an AI malf attack
|
|
if(!src.malfhack && src.z == 1)
|
|
if(prob(3))
|
|
src.locked = 1
|
|
if (src.cell.charge > 0)
|
|
// world << "\red blew APC in [src.loc.loc]"
|
|
src.cell.charge = 0
|
|
cell.corrupt()
|
|
src.malfhack = 1
|
|
update_icon()
|
|
var/datum/effect/effect/system/harmless_smoke_spread/smoke = new /datum/effect/effect/system/harmless_smoke_spread()
|
|
smoke.set_up(3, 0, src.loc)
|
|
smoke.attach(src)
|
|
smoke.start()
|
|
var/datum/effect/effect/system/spark_spread/s = new /datum/effect/effect/system/spark_spread
|
|
s.set_up(3, 1, src)
|
|
s.start()
|
|
for(var/mob/M in viewers(src))
|
|
M.show_message("\red The [src.name] suddenly lets out a blast of smoke and some sparks!", 3, "\red You hear sizzling electronics.", 2)
|
|
|
|
|
|
/obj/machinery/power/apc/surplus()
|
|
if(terminal)
|
|
return terminal.surplus()
|
|
else
|
|
return 0
|
|
|
|
/obj/machinery/power/apc/add_load(var/amount)
|
|
if(terminal && terminal.powernet)
|
|
terminal.powernet.newload += amount
|
|
|
|
/obj/machinery/power/apc/avail()
|
|
if(terminal)
|
|
return terminal.avail()
|
|
else
|
|
return 0
|
|
|
|
/obj/machinery/power/apc/process()
|
|
|
|
if(stat & (BROKEN|MAINT))
|
|
return
|
|
if(!area.requires_power)
|
|
return
|
|
|
|
|
|
/*
|
|
if (equipment > 1) // off=0, off auto=1, on=2, on auto=3
|
|
use_power(src.equip_consumption, EQUIP)
|
|
if (lighting > 1) // off=0, off auto=1, on=2, on auto=3
|
|
use_power(src.light_consumption, LIGHT)
|
|
if (environ > 1) // off=0, off auto=1, on=2, on auto=3
|
|
use_power(src.environ_consumption, ENVIRON)
|
|
|
|
area.calc_lighting() */
|
|
|
|
lastused_light = area.usage(LIGHT)
|
|
lastused_equip = area.usage(EQUIP)
|
|
lastused_environ = area.usage(ENVIRON)
|
|
area.clear_usage()
|
|
|
|
lastused_total = lastused_light + lastused_equip + lastused_environ
|
|
|
|
//store states to update icon if any change
|
|
var/last_lt = lighting
|
|
var/last_eq = equipment
|
|
var/last_en = environ
|
|
var/last_ch = charging
|
|
|
|
var/excess = surplus()
|
|
|
|
if(!src.avail())
|
|
main_status = 0
|
|
else if(excess < 0)
|
|
main_status = 1
|
|
else
|
|
main_status = 2
|
|
|
|
var/perapc = 0
|
|
if(terminal && terminal.powernet)
|
|
perapc = terminal.powernet.perapc
|
|
|
|
//if(debug)
|
|
// world.log << "Status: [main_status] - Excess: [excess] - Last Equip: [lastused_equip] - Last Light: [lastused_light] - Longterm: [longtermpower]"
|
|
|
|
if(cell && !shorted)
|
|
|
|
|
|
// draw power from cell as before
|
|
var/cellused = min(cell.charge, CELLRATE * lastused_total) // clamp deduction to a max, amount left in cell
|
|
cell.use(cellused)
|
|
|
|
if(excess > 0 || perapc > lastused_total) // if power excess, or enough anyway, recharge the cell
|
|
// by the same amount just used
|
|
cell.give(cellused)
|
|
add_load(cellused/CELLRATE) // add the load used to recharge the cell
|
|
|
|
|
|
else // no excess, and not enough per-apc
|
|
|
|
if( (cell.charge/CELLRATE+perapc) >= lastused_total) // can we draw enough from cell+grid to cover last usage?
|
|
|
|
cell.charge = min(cell.maxcharge, cell.charge + CELLRATE * perapc) //recharge with what we can
|
|
add_load(perapc) // so draw what we can from the grid
|
|
charging = 0
|
|
|
|
else // not enough power available to run the last tick!
|
|
charging = 0
|
|
chargecount = 0
|
|
// This turns everything off in the case that there is still a charge left on the battery, just not enough to run the room.
|
|
equipment = autoset(equipment, 0)
|
|
lighting = autoset(lighting, 0)
|
|
environ = autoset(environ, 0)
|
|
|
|
|
|
// set channels depending on how much charge we have left
|
|
|
|
// Allow the APC to operate as normal if the cell can charge
|
|
if(charging && longtermpower < 10)
|
|
longtermpower += 1
|
|
else if(longtermpower > -10)
|
|
longtermpower -= 2
|
|
|
|
if(cell.charge <= 0) // zero charge, turn all off
|
|
equipment = autoset(equipment, 0)
|
|
lighting = autoset(lighting, 0)
|
|
environ = autoset(environ, 0)
|
|
area.poweralert(0, src)
|
|
else if(cell.percent() < 15 && longtermpower < 0) // <15%, turn off lighting & equipment
|
|
equipment = autoset(equipment, 2)
|
|
lighting = autoset(lighting, 2)
|
|
environ = autoset(environ, 1)
|
|
area.poweralert(0, src)
|
|
else if(cell.percent() < 30 && longtermpower < 0) // <30%, turn off equipment
|
|
equipment = autoset(equipment, 2)
|
|
lighting = autoset(lighting, 1)
|
|
environ = autoset(environ, 1)
|
|
area.poweralert(0, src)
|
|
else // otherwise all can be on
|
|
equipment = autoset(equipment, 1)
|
|
lighting = autoset(lighting, 1)
|
|
environ = autoset(environ, 1)
|
|
area.poweralert(1, src)
|
|
if(cell.percent() > 75)
|
|
area.poweralert(1, src)
|
|
|
|
// now trickle-charge the cell
|
|
|
|
if(chargemode && charging == 1 && operating)
|
|
if(excess > 0) // check to make sure we have enough to charge
|
|
// Max charge is perapc share, capped to cell capacity, or % per second constant (Whichever is smallest)
|
|
/* var/ch = min(perapc, (cell.maxcharge - cell.charge), (cell.maxcharge*CHARGELEVEL))
|
|
add_load(ch) // Removes the power we're taking from the grid
|
|
cell.give(ch) // actually recharge the cell
|
|
*/
|
|
var/ch = min(perapc*CELLRATE, (cell.maxcharge - cell.charge), (cell.maxcharge*CHARGELEVEL))
|
|
add_load(ch/CELLRATE) // Removes the power we're taking from the grid
|
|
cell.give(ch) // actually recharge the cell
|
|
|
|
else
|
|
charging = 0 // stop charging
|
|
chargecount = 0
|
|
|
|
// show cell as fully charged if so
|
|
|
|
if(cell.charge >= cell.maxcharge)
|
|
charging = 2
|
|
|
|
if(chargemode)
|
|
if(!charging)
|
|
if(excess > cell.maxcharge*CHARGELEVEL)
|
|
chargecount++
|
|
else
|
|
chargecount = 0
|
|
|
|
if(chargecount == 10)
|
|
|
|
chargecount = 0
|
|
charging = 1
|
|
|
|
else // chargemode off
|
|
charging = 0
|
|
chargecount = 0
|
|
|
|
else // no cell, switch everything off
|
|
|
|
charging = 0
|
|
chargecount = 0
|
|
equipment = autoset(equipment, 0)
|
|
lighting = autoset(lighting, 0)
|
|
environ = autoset(environ, 0)
|
|
area.poweralert(0, src)
|
|
|
|
// update icon & area power if anything changed
|
|
|
|
if(last_lt != lighting || last_eq != equipment || last_en != environ)
|
|
queue_icon_update()
|
|
update()
|
|
else if (last_ch != charging)
|
|
queue_icon_update()
|
|
|
|
//src.updateDialog()
|
|
src.updateDialog()
|
|
|
|
// val 0=off, 1=off(auto) 2=on 3=on(auto)
|
|
// on 0=off, 1=on, 2=autooff
|
|
|
|
obj/machinery/power/apc/proc/autoset(var/val, var/on)
|
|
if(on==0)
|
|
if(val==2) // if on, return off
|
|
return 0
|
|
else if(val==3) // if auto-on, return auto-off
|
|
return 1
|
|
|
|
else if(on==1)
|
|
if(val==1) // if auto-off, return auto-on
|
|
return 3
|
|
|
|
else if(on==2)
|
|
if(val==3) // if auto-on, return auto-off
|
|
return 1
|
|
|
|
return val
|
|
|
|
// damage and destruction acts
|
|
|
|
/obj/machinery/power/apc/meteorhit(var/obj/O as obj)
|
|
|
|
set_broken()
|
|
return
|
|
|
|
/obj/machinery/power/apc/emp_act(severity)
|
|
if(cell)
|
|
cell.emp_act(severity)
|
|
if(occupant)
|
|
occupant.emp_act(severity)
|
|
lighting = 0
|
|
equipment = 0
|
|
environ = 0
|
|
spawn(600)
|
|
equipment = 3
|
|
environ = 3
|
|
..()
|
|
|
|
/obj/machinery/power/apc/ex_act(severity)
|
|
|
|
switch(severity)
|
|
if(1.0)
|
|
//set_broken() //now Del() do what we need
|
|
if (cell)
|
|
cell.ex_act(1.0) // more lags woohoo
|
|
del(src)
|
|
return
|
|
if(2.0)
|
|
if (prob(50))
|
|
set_broken()
|
|
if (cell && prob(50))
|
|
cell.ex_act(2.0)
|
|
if(3.0)
|
|
if (prob(25))
|
|
set_broken()
|
|
if (cell && prob(25))
|
|
cell.ex_act(3.0)
|
|
return
|
|
|
|
/obj/machinery/power/apc/blob_act()
|
|
if (prob(75))
|
|
set_broken()
|
|
if (cell && prob(5))
|
|
cell.blob_act()
|
|
|
|
/obj/machinery/power/apc/proc/set_broken()
|
|
if(malfai && operating)
|
|
if (ticker.mode.config_tag == "malfunction")
|
|
if (src.z == 1) //if (is_type_in_list(get_area(src), the_station_areas))
|
|
ticker.mode:apcs--
|
|
stat |= BROKEN
|
|
operating = 0
|
|
if(occupant)
|
|
malfvacate(1)
|
|
update_icon()
|
|
update()
|
|
|
|
// overload all the lights in this APC area
|
|
|
|
/obj/machinery/power/apc/proc/overload_lighting()
|
|
if(/* !get_connection() || */ !operating || shorted)
|
|
return
|
|
if( cell && cell.charge>=20)
|
|
cell.use(20);
|
|
spawn(0)
|
|
for(var/area/A in area.related)
|
|
for(var/obj/machinery/light/L in A)
|
|
L.on = 1
|
|
L.broken()
|
|
sleep(1)
|
|
|
|
/obj/machinery/power/apc/Del()
|
|
if(malfai && operating)
|
|
if (ticker.mode.config_tag == "malfunction")
|
|
if (src.z == 1) //if (is_type_in_list(get_area(src), the_station_areas))
|
|
ticker.mode:apcs--
|
|
area.power_light = 0
|
|
area.power_equip = 0
|
|
area.power_environ = 0
|
|
area.power_change()
|
|
if(occupant)
|
|
malfvacate(1)
|
|
..()
|
|
|
|
/obj/machinery/power/apc/proc/shock(mob/user, prb)
|
|
if(!prob(prb))
|
|
return 0
|
|
var/datum/effect/effect/system/spark_spread/s = new /datum/effect/effect/system/spark_spread
|
|
s.set_up(5, 1, src)
|
|
s.start()
|
|
if(isalien(user))
|
|
return 0
|
|
if (electrocute_mob(user, src, src))
|
|
return 1
|
|
else
|
|
return 0
|
|
|
|
/obj/machinery/power/apc/proc/setsubsystem(val)
|
|
if(cell && cell.charge > 0)
|
|
return (val==1) ? 0 : val
|
|
else if(val == 3)
|
|
return 1
|
|
else
|
|
return 0
|
|
|
|
#undef APC_UPDATE_ICON_COOLDOWN |