* Doubles PACMAN power output, triples their sheet efficiency. Inducers can now be recharged with plasma. (#85950)
## About The Pull Request
PACMANs now can produce 10-40kW of power and take 180 ticks to go
through a sheet instead of 60. This does not allow them to power the
station on their own like in the good ole days, but they're still
capable of powering a section of a department(maybe even all of it if it
doesn't eat too much power)
Inducers can be recharged with plasma, 15kJ per sheet. Cargo-ordered
inducers now also start with an upgraded megacell (x2.5 of a normal one)
instead of a regular upgraded battery (x5 of a normal one and half of a
megacell) (it barely can charge anything)
## Why It's Good For The Game
PACMANs are currently in a very sad state as they are borderline useless
after power changes, and don't see much use beyond kickstarting the SM
if emitters don't have enough juice. This should bring them a bit into
action while not allowing them to power the entire station like before.
As for emitter changes, introduction of megacells rendered them almost
entirely useless as you cannot charge megacells you print and using
normal batteries for charging APCs is a joke. This should allow people
to recharge their APCs and machinery in a pinch. Inducer change has been
approved by Watermelon a while ago, while PACMAN buffs have been
mentioned but these are significantly smaller than discussed with him.
## Changelog
🆑
balance: PACMANs now have significantly increased power output and take
longer to consume a single sheet
balance: Inducers can now be recharged with plasma
balance: Inducers ordered from cargo now start with upgraded megacells
instead of upgraded batteries
/🆑
* Doubles PACMAN power output, triples their sheet efficiency. Inducers can now be recharged with plasma.
---------
Co-authored-by: SmArtKar <44720187+SmArtKar@users.noreply.github.com>
* Converts arbitrary energy units to the joule. Fixes conservation of energy issues relating to charging cells. (#81579)
Removes all arbitrary energy and power units in the codebase. Everything
is replaced with the joule and watt, with 1 = 1 joule, or 1 watt if you
are going to multiply by time. This is a visible change, where all
arbitrary energy units you see in the game will get proper prefixed
units of energy.
With power cells being converted to the joule, charging one joule of a
power cell will require one joule of energy.
The grid will now store energy, instead of power. When an energy usage
is described as using the watt, a power to energy conversion based on
the relevant subsystem's timing (usually multiplying by seconds_per_tick
or applying power_to_energy()) is needed before adding or removing from
the grid. Power usages that are described as the watt is really anything
you would scale by time before applying the load. If it's described as a
joule, no time conversion is needed. Players will still read the grid as
power, having no visible change.
Machines that dynamically use power with the use_power() proc will
directly drain from the grid (and apc cell if there isn't enough)
instead of just tallying it up on the dynamic power usages for the area.
This should be more robust at conserving energy as the surplus is
updated on the go, preventing charging cells from nothing.
APCs no longer consume power for the dynamic power usage channels. APCs
will consume power for static power usages. Because static power usages
are added up without checking surplus, static power consumption will be
applied before any machine processes. This will give a more truthful
surplus for dynamic power consumers.
APCs will display how much power it is using for charging the cell. APC
cell charging applies power in its own channel, which gets added up to
the total. This will prevent invisible power usage you see when looking
at the power monitoring console.
After testing in MetaStation, I found roundstart power consumption to be
around 406kW after all APCs get fully charged. During the roundstart APC
charge rush, the power consumption can get as high as over 2MW (up to
25kW per roundstart APC charging) as long as there's that much
available.
Because of the absurd potential power consumption of charging APCs near
roundstart, I have changed how APCs decide to charge. APCs will now
charge only after all other machines have processed in the machines
processing subsystem. This will make sure APC charging won't disrupt
machines taking from the grid, and should stop APCs getting their power
drained due to others demanding too much power while charging. I have
removed the delays for APC charging too, so they start charging
immediately whenever there's excess power. It also stops them turning
red when a small amount of cell gets drained (airlocks opening and shit
during APC charge rush), as they immediately become fully charged
(unless too much energy got drained somehow) before changing icon.
Engineering SMES now start at 100% charge instead of 75%. I noticed
cells were draining earlier than usual after these changes, so I am
making them start maxed to try and combat that.
These changes will fix all conservation of energy issues relating to
charging powercells.
Closes#73438Closes#75789Closes#80634Closes#82031
Makes it much easier to interface with the power system in the codebase.
It's more intuitive. Removes a bunch of conservation of energy issues,
making energy and power much more meaningful. It will help the
simulation remain immersive as players won't encounter energy
duplication so easily. Arbitrary energy units getting replaced with the
joule will also tell people more meaningful information when reading it.
APC charging will feel more snappy.
🆑
fix: Fixes conservation of energy issues relating to charging
powercells.
qol: APCs will display how much power they are using to charge their
cell. This is accounted for in the power monitoring console.
qol: All arbitrary power cell energy units you see are replaced with
prefixed joules.
balance: As a consequence of the conservation of energy issues getting
fixed, the power consumption for charging cells is now very significant.
balance: APCs only use surplus power from the grid after every machine
processes when charging, preventing APCs from causing others to
discharge while charging.
balance: Engineering SMES start at max charge to combat the increased
energy loss due to conservation of energy fixes.
/🆑
---------
Co-authored-by: SyncIt21 <110812394+SyncIt21@users.noreply.github.com>
Co-authored-by: Ghom <42542238+Ghommie@users.noreply.github.com>
* Corrects Suit Storage Unit charge rate (#82192)
## About The Pull Request
Adjusts SSU charge rate according to the new conversion ratio.
Betcha didn't know SSUs recharge suit and MOD cells?
This number is actually supposed to be equal to the rate a recharger
station does it.
I don't know if we have some macro for it.
## Changelog
🆑 Melbert
fix: Fixed Suit Storage Unit cell charging rate
/🆑
* Corrects EVA thermal regulator cell cost (#82195)
## About The Pull Request
Another unit not converted to watts / joules
## Changelog
🆑 Melbert
fix: Fixed space suit thermal regulators cell usage.
/🆑
* Fixing cell power usage (Part 1) (#82197)
## About The Pull Request
Yeah i am not about to create 30 different PR's to address 1 issue at a
time. The changes are small enough to be grouped together in bulk.
This fixes the following issues specified in #82196
- Borg & exosuit RCD (Fixes#82193)
- Motorized wheelchair
- Canister shielding
- Electrolyser
- Potato cell
- Space heater
- Microwave
## Changelog
🆑
fix: Fixed cell energy usage for a bunch of stuff(Part 1). See PR 82197
for details
/🆑
---------
Co-authored-by: Pickle-Coding <58013024+Pickle-Coding@users.noreply.github.com>
* Fixing cell power usage (Part 2) (#82198)
## About The Pull Request
Continuation of #82197.
Fixes these issues in #82196
- Cyborg self repair
- Cyborg lollipop dispenser
- Mauna mug
- Plasma cutter (Initial charge not the number of laser shots so partial
fix)
## Changelog
🆑
fix: Fixed more energy usages for cells(Part 2). See PR 82198 for
details
/🆑
---------
Co-authored-by: Pickle-Coding <58013024+Pickle-Coding@users.noreply.github.com>
* Fixing cell power usage (Part 3) (#82204)
## About The Pull Request
Continuation of #82198
Fixes these issues in #82196
- Borg hypo spray
- Borg projectile dampen
- Borg chameleon
- Firelance
- MODlink scryer
- Emergency light usage
## Changelog
🆑
fix: Fixed more energy usages for cells(Part 3). See PR 82204 for
details
/🆑
---------
Co-authored-by: Pickle-Coding <58013024+Pickle-Coding@users.noreply.github.com>
* [NO GBP]Fixes static power usage not always drawing the remaining energy of an APC cell. (#82205)
## About The Pull Request
Makes APC static power draw consume the remaining energy of the cell if
there's not enough energy.
## Why It's Good For The Game
Prevents a niche issue where an area composed entirely of static power
users with no dynamic users from running forever with no power supply.
## Changelog
🆑
fix: Fixes static power usage from being able to not draw power.
/🆑
* Fixes recharge stations charge rates (#82191)
## About The Pull Request
- Fixes#82190
Have to now use the assigned constants and not magic number `10000`.
Also stuff will take the exact charge needed without any wastage.
## Changelog
🆑
fix: recharge stations draw the same amount of power as before but
directly from grid(without using apc cell power) and won't waste any
excess power
/🆑
---------
Co-authored-by: san7890 <the@san7890.com>
* Fixes space heater power usage (#82208)
## About The Pull Request
Related to https://github.com/tgstation/tgstation/issues/82196 fixes the
space heater power cell usage relating to power per tile heated.
Space heater calculates the amount of power required to heat a tile, but
only uses power at the end of the processing loop. Fixes so the power
consumption matches the calculated usage per tile.
Reverts changes to space heater power efficiency in
https://github.com/tgstation/tgstation/pull/82197 that causes the heater
to instantly drain the cell.
Fixes https://github.com/tgstation/tgstation/issues/82228
## Changelog
🆑 LT3
fix: Fixes Schrödinger's space heater, where a space heater both
consumes a power cell instantly while also not consuming power when
heating adjacent tiles
/🆑
* General maintenance for reagent grinder (#82161)
## About The Pull Request
**1. Qol**
- Adds examines & screentips for screwdriver, crowbar & wrench acts.
- Adds examines & screentips for inserting, replacing & removing beaker,
Also for inserting items from bags or directly
- Adds an off icon overlay for when the reagent grinder is either
screwed open or loses power,
**2. Code Improvements**
- Replaced `attackby()` with `item_interaction()` so we can end the
attack chain early for non combat operations like inserting beakers/
ingredients for grinding etc.
- Removed custom shake animations & replaced it with the global
`Shake()` proc cause it did the same thing
- Removed constructed version of reagent grinder. We instead just check
`mapload` to see if we need the beaker to be created or not for round
start reagent grinders
- Grinding & Juicing use the same `operate_for()` rather than having
seperate procs for each operation
- Removed trait `TRAIT_MAY_CONTAIN_BLENDED_DUST`. Why do we have this?
Its just used to change the grinder description to warn it may contain
dust. It's a waste.
**3. Fixes**
- You cannot insert hologram items into the grinder. Rather than
destroying that item & making it vanish you simply won't be allowed to
put it inside the grinder so you can save that item
- You can hit the grinder with items like screwdriver, wrench, crowbar,
beaker & even with stuff you would normally put in the grinder when in
combat mode
- Adds `can_interact()` checks for using the UI & other stuff
- Fixes#46356. All items of type `obj/item/grown` can be put from any
bag into the grinder
- The item "and its contents" are now grinded/juiced recursively to get
all the reagents it has to offer just like a real grinder would
- An AI/Human with AI access examining the reagent grinder now actually
works.
**4. Refactors**
- The grinder now measures its available capacity based on the "total
weight" of all items present & not its number. This is more realistic
because the grinder has limited space inside & so inserting huge items
should have greater impact rather than deciding on an arbitrary number
like 10(The grinder having the capacity for 10 items of any size inside
its small compartment makes no sense). Examines are displayed to show
how much capacity of the grinder has been filled. Upgrading the grinder
with better matter bins will allow for higher storage capacities.
- Total power consumed is measured based on the duration & weight of all
items grinded cause you know its realistic.
🆑
qol: adds examines & screentips for tool acts & other operations for
reagent grinder
qol: adds an off icon for when the grinder panel is open/not powered
code: auto docs vars & procs. Shared common proc for grinding or juicing
code: removed trait for blended dust, changed some item interactions to
end the attack chain early & save time
fix: no inserting hologram items into the reagent grinder
fix: you can hit the reagent grinder tools like screwdriver, wrench,
crowbar & even beakers/ingredients etc when in combat mode
fix; adds sanity checks for when & how mobs interact with the reagent
grinder
fix: examining a reagent grinder by an AI/Human with AI access now
actually works.
fix: you can insert Nova flowers & other food items from any bag type
fix: reagent grinder now grinds all the contents of an item recursively
to produce maximum reagents like a real grinder would
refactor: reagent grinder now measures available capacity to store items
as total weight of stored items & not number. Capacity can be increased
with upgraded matter bin
refactor: reagent grinder power usage is now a function of duration &
total weight of items blended, meaining blending more number of
items/larger items will consume more power
refactor: reagent grinder code has been optimized overall. Report bugs
on github
/🆑
---------
Co-authored-by: Timberpoes <silent_insomnia_pp@hotmail.co.uk>
* Suit Storage Units / Inducers can charge MODsuits without necessitating them be screwdrivered opened (#82194)
## About The Pull Request
So MODsuits do this thing here with `get_cell` in that they don't return
anything when they're closed
And I... can't tell why they do this.
I looked through every use of `get_cell` and the only things affected by
this are
A. Suit Storage Units, which I believe have always been intended to
charge MODsuits?
and
B. Inducers
So I removed the `open` check. Allowing both Inducers and Suit Storage
Units to charge mods without needing you screwdriver their panel open
first.
I also took the opportunity to allow SSUs to charge multiple items at
once (divvying charge accross all items)
## Why It's Good For The Game
I asked Fikou and they said it was "probably not" intended that you need
to screwdriver them open so yeah.
I think I remember charging my MODs during the original test merges
years back but I can't remember if I opened the suit first when I did or
not.
Either way, it's not super intuitive. Though it's already not very
intuitive that SSUs charge things.
## Changelog
🆑 Melbert
qol: Suit Storage Units charge MODsuits while their cell panel is closed
or open, rather than only when screwed open
qol: Inducers can charge MODsuits while their cell panel is closed or
open, rather than only when screwed open
qol: Suit Storage Units will charge all items within simultaneously (if
possible)
/🆑
---------
Co-authored-by: san7890 <the@san7890.com>
* Fixes modular computer boot-up (#82254)
## About The Pull Request
Fixes a bug where modular computers (specifically PDAs) will fail to
start up if there is zero required application power draw.
PDA will now consume base active power usage during startup.
Related https://github.com/tgstation/tgstation/issues/82196
Fixes https://github.com/tgstation/tgstation/issues/82245
Fixes https://github.com/tgstation/tgstation/issues/82229
## Changelog
🆑 LT3
fix: Fixed modular computers failing to boot up using cell power (eg:
contractor tablet)
/🆑
* Fixing cell power usage (Part 4) (#82227)
## About The Pull Request
Continuation of #82204
Fixes these issues in #82196
- Cyborg Electroadaptive Pseudocircuit
- Defib EMP
- Cell EMP
- `/datum/action/cooldown/mob_cooldown/charge_apc` stuff
- Mecha movement, melee, light ,weapon & tool energy drains
- Ninja drain
## Changelog
🆑
fix: Fixed more energy usages for cells(Part 4). See PR 82227 for
details
/🆑
---------
Co-authored-by: Pickle-Coding <58013024+Pickle-Coding@users.noreply.github.com>
* Fixing cell power usage (Part 5) (#82296)
## About The Pull Request
Continuation of #82227
Fixes these issues in
https://github.com/tgstation/tgstation/issues/82196 and others that
weren't noticed.
- Batton emp protection
- Cyborg stun arm
- Cyborg energy sword
- Cyborg hug attack
- Mechanical god religious sect charge check
- Mecha fixes
- Phasing energy drain
- Short circuit energy drain
- Durand shield damage energy drain
- Plasma engine recharge rate
- Mechbay recharge power rate
- Recharge station charge rate
Stuff that was already working & didn't require fixing.
- Plasma cutter energy shots
- Botany cell charging
## Changelog
🆑
fix: Fixed cell energy usage for a bunch of stuff(Part 5). See PR 82296
for details
/🆑
---------
Co-authored-by: Pickle-Coding <58013024+Pickle-Coding@users.noreply.github.com>
* Ties power limit of anchored circuits to 20 * standard cell charge to make it consistent with power changes. (#82287)
## About The Pull Request
It just makes the power requirement 20 * standard cell charge instead of
20000
## Why It's Good For The Game
This is too restrictive to make anything with.
https://github.com/tgstation/tgstation/assets/62126254/e39dcf27-8793-42b0-84a0-7f747e95efcc
## Changelog
🆑
fix: anchored circuits no longer blow up after 2 components are used.
/🆑
---------
Co-authored-by: Pickle-Coding <58013024+Pickle-Coding@users.noreply.github.com>
* Space heater power and heating tweaks (#82344)
## About The Pull Request
- Fixes#82342
- Space heater computes total power for heating adjacent turfs and uses
cell energy once rather multiple times per turf
- Improvised space heater actually works & uses beaker heat capacity and
not a constant of 200 for heating beaker contents
## Changelog
🆑 SyncIt21,Pickle-Coding
fix: space heater(including improvised) turns off when cell is drained
fix: optimized power usage for both improvised and main space heater.
Improvised heater now works & uses beaker heat capacity
/🆑
* Improved lathe error message (#82260)
## About The Pull Request
Improves the auto/protolathe low charge error message. Instead of simply
saying low power, it will tell you how long until it has enough charge
to print.
## Why It's Good For The Game
Less mashing the lathe over and over with no idea how much APC charge it
needs to start printing again
## Changelog
🆑 LT3
code: APCs can now calculate time-to-charge
qol: Overloaded lathes will now tell you the wait time until they're
ready to print again
/🆑
---------
Co-authored-by: san7890 <the@san7890.com>
* Fixes issues with multitools on power objects (#82389)
## About The Pull Request
So at some point the power object's `multitool_act(...)` proc was set to
_always_ block, for what I could find to be no discernable reason.
### The Main Thing
https://github.com/tgstation/tgstation/blob/d38f9385b863e49f83455a227764d302629e2867/code/modules/power/power.dm#L62-L74
Now, of course, it shouldn't, because this cuts the entire chain short
and thus blocks any other multitool interactions. Like opening the wires
panel with a multitool, in this case. Even if `can_change_cable_layer`
were to be false and thus the object would never actually care about
having this interaction, it'd _still_ block it.
So we don't do that. But what _do_ we do?
I decided to just split off the actual cable changing part into its own
proc, `cable_layer_act(...)`.
```dm
/obj/machinery/power/proc/cable_layer_act(mob/living/user, obj/item/tool)
var/choice = tgui_input_list(user, "Select Power Line For Operation", "Select Cable Layer", GLOB.cable_name_to_layer)
if(isnull(choice))
return ITEM_INTERACT_BLOCKING
cable_layer = GLOB.cable_name_to_layer[choice]
balloon_alert(user, "now operating on the [choice]")
return ITEM_INTERACT_SUCCESS
```
Which is then called on `multitool_act(...)`, if
`can_change_cable_layer` is true.
```dm
/obj/machinery/power/multitool_act(mob/living/user, obj/item/tool)
if(can_change_cable_layer)
return cable_layer_act(user, tool)
```
Which continues with the chain if we can't change layers by default, and
otherwise lets `cable_layer_act(...)` work out whether we should block
or continue.
Notably, we've removed the `cable_layer_change_checks(...)` proc from
the equation, and just let inheritors override it to add their own
preconditions and what flags they should return.
On its own this fixes the APC wire panel interactions, but also lets us
just return `NONE` when we need to.
```dm
/obj/machinery/power/emitter/cable_layer_act(mob/living/user, obj/item/tool)
if(panel_open)
return NONE
if(welded)
balloon_alert(user, "unweld first!")
return ITEM_INTERACT_BLOCKING
return ..()
```
### The OTHER Things
While doing this I noticed there's actually very little sanity checks
after we close our input list.
```dm
var/choice = tgui_input_list(user, "Select Power Line For Operation", "Select Cable Layer", GLOB.cable_name_to_layer)
if(isnull(choice))
return ITEM_INTERACT_BLOCKING
```
We only care about whether we made a choice!
Testing this, lo and behold, this can cause runtimes if the power object
gets qdeleted before you close the menu.
As a funny side, it _also_ doesn't care about whether you're on the
other side of the station, while your multitool is on a different
z-level, or just doesn't exist anymore.
So we just add a few basic sanity checks while we're at it.
```dm
var/choice = tgui_input_list(user, "Select Power Line For Operation", "Select Cable Layer", GLOB.cable_name_to_layer)
if(isnull(choice) || QDELETED(src) || QDELETED(user) || QDELETED(tool) || !user.Adjacent(src) || !user.is_holding(tool))
return ITEM_INTERACT_BLOCKING
```
That's all. Having done some basic testing, I believe the behaviour is
otherwise unaffected.
## Why It's Good For The Game
It's annoying to need to swap to an empty hand or wirecutters to
interact with APC, emitter, or tesla coil wires.
This fixes that. (Fixes #81745.)
...and then a few other tidbits I realized existed.
## Changelog
🆑
fix: Fix using a multitool on a power object with wires not actually
opening the wires menu when it should.
fix: Fix a runtime from a power object being deleted before selecting
what cable layer to put it at.
fix: Fix power object cable changing not caring about whether you were
still adjacent, still holding your multitool, or whether it even still
existed after the selection menu was closed.
/🆑
* Updates cyborg cells created from borgifier to the SI standard (#82437)
## About The Pull Request
Unchanged value in transformer.dm resulted in borg charge draining to
zero immediately after forced conversion in the borgifer. Changing the
value of robot cell charge to 5 MJs to fix this.
## Why It's Good For The Game
Fixes#82426
## Changelog
🆑
fix: changed value of cell charge from 5000 to 5 megajoules
/🆑
* cell chargers now bypass APCs (#82309)
## About The Pull Request
This makes cell chargers and suit storage units draw from the grid
before the local apc
## Why It's Good For The Game
Upgraded Cell chargers have a charging power of 1MW leading to them
instantly draining the apc of any room they are in,
this Pr makes them draw from the grid preventing immediate blackout.
This is a stopgap until someone smarter than me changes power values so
a pocket-sized battery won't require the same power to charge then over
600 average suburban homes.
## Changelog
🆑
balance: suit and cell chargers should draw from grid preventing instant
apc blackouts in most cases.
/🆑
* Let ethereals starve again (#82308)
## About The Pull Request
Ethereals use energy as 'food', so of course #81579 had to touch them.
To bring them in line with the new standard, the Ethereal charge levels
were updated to be in megajoules.
https://github.com/tgstation/tgstation/blob/466b3df0483162c3900e411c25dfe15c2320786e/code/__DEFINES/mobs.dm#L292-L299https://github.com/tgstation/tgstation/blob/7fa8daad63f49a11e22ab64a984d29b35619852c/code/__DEFINES/mobs.dm#L285-L292
However! This forgot to update the rate at which Ethereals passively
discharge.
https://github.com/tgstation/tgstation/blob/7fa8daad63f49a11e22ab64a984d29b35619852c/code/modules/surgery/organs/internal/stomach/stomach_ethereal.dm#L11-L14https://github.com/tgstation/tgstation/blob/7fa8daad63f49a11e22ab64a984d29b35619852c/code/__DEFINES/mobs.dm#L437
Meaning it's effectively a thousand times less with the new charge
levels.
So we simply update this define to be in kilowatts.
```dm
#define ETHEREAL_CHARGE_FACTOR (0.8 KILO WATTS) //factor at which ethereal's charge decreases per second
```
## Why It's Good For The Game
Fixes issue with ethereal hunger caused by #81579.
## Changelog
🆑
fix: Ethereal starvation has been updated to the new joules/watts
standard. Congratulations Ethereals! You can starve again!
/🆑
* [NO GBP]Fixes ethereal charging and recharge station charge speed. (#82483)
## About The Pull Request
Fixes many instances of things not charging ethereals properly. Scales
all things that are meant for charging/taking from the ethereal stomach
by STANDARD_CELL_CHARGE, so we never run into this issue again. Ethereal
stomachs now store a cell inside them, and uses that for the charge
instead of tracking a variable. Fixes recharging stations not being able
to charge ethereal stomachs. The ethereal signal proc attempted to feed
a callback datum to adjust_charge(), which caused a runtime. Changes
that by invoking the charge_cell callback instead.
Also fixes recharge station charging speed. They weren't converted
correctly. Also formats their charging speed in their description, and
displays power rather than referencing cycles.
## Why It's Good For The Game
So ethereals charge properly.
Closes#82470
## Changelog
🆑
fix: Fixes many instances of energy sources for ethereals supplying a
thousand times less energy than intended.
fix: Fixes recharging stations not being able to charge ethereals.
fix: Fixes recharge stations charging too fast.
qol: Recharge stations display their recharging speed in formatted
power, rather than unformatted energy per cycle.
/🆑
---------
Co-authored-by: san7890 <the@san7890.com>
* Update lead acid batteries charge values (#82510)
## About The Pull Request
So during the whole power consistency update thing, it seems lead acid
batteries were entirely forgotten about.
Which, well, is easy, because they never actually used
`STANDARD_CELL_CHARGE`.
https://github.com/tgstation/tgstation/blob/c34d56a45b0461f5e0fad3cc75e81580c3357119/code/game/objects/items/maintenance_loot.dm#L32-L33
Looking into it, the previous value for `STANDARD_CELL_CHARGE` seemed to
have been 1000, so we convert it directly:
```dm
maxcharge = STANDARD_CELL_CHARGE * 20
chargerate = STANDARD_CELL_CHARGE * 1.4
```
But, comparing this to the normal power cells, it seems their charge
rates got _halved_ during the update.
So, we do that too.
```dm
maxcharge = STANDARD_CELL_CHARGE * 20
chargerate = STANDARD_CELL_CHARGE * 0.7
```
And that fixes it.
## Why It's Good For The Game
Fixes lead acid batteries still using the old power amounts, and not
being relative to `STANDARD_CELL_CHARGE`.
## Changelog
🆑
fix: Lead acid batteries have had their power values fixed.
/🆑
* This should do for modular code, for now.
* Fixing cell power usage (Part 5) (#82296)
Continuation of #82227
Fixes these issues in
https://github.com/tgstation/tgstation/issues/82196 and others that
weren't noticed.
- Batton emp protection
- Cyborg stun arm
- Cyborg energy sword
- Cyborg hug attack
- Mechanical god religious sect charge check
- Mecha fixes
- Phasing energy drain
- Short circuit energy drain
- Durand shield damage energy drain
- Plasma engine recharge rate
- Mechbay recharge power rate
- Recharge station charge rate
Stuff that was already working & didn't require fixing.
- Plasma cutter energy shots
- Botany cell charging
🆑
fix: Fixed cell energy usage for a bunch of stuff(Part 5). See PR 82296
for details
/🆑
---------
Co-authored-by: Pickle-Coding <58013024+Pickle-Coding@users.noreply.github.com>
* [NO GBP]Fixes some mapped SMES starting with low energy. (#82203)
## About The Pull Request
Scales them all by up to 20 to account for removing the dumb SMESRATE
define. This isn't a 100% conversion for every SMES because it would go
beyond their capacity (old SMES use to duplicate cell energy, so they
had a higher capacity than their cell parts imply). Also removes
instances of varediting their capacity to fucking 1e+600 and replaces
them with magical SMES.
## Why It's Good For The Game
So lavaland and crap don't instantly run out of power. Also I don't
think we should be varediting anything to 1e+600.
## Changelog
🆑
fix: Fixes lavaland SMES and other crap from not starting with enough
energy.
fix: The pirate SMES are now magical instead of secretly infinite.
/🆑
* Mechbay & modsuit recharger tweaks (#82337)
## About The Pull Request
- Both mechbay & modsuit rechargers now waste a small amount of energy
as heat like it did before
- Fixes#82332. Mechbay recharger displays the energy of the mech in
joules & charges the cell with the exact energy required directly from
the grid thus not causing the room to blackout
## Changelog
🆑
fix: Mechbay & modsuit rechargers waste a small amount of energy as heat
fix: Mechbay recharger console displays mech charge as joules & charges
directly from the grid thus sparing the rooms apc cell from huge loads
/🆑
* Refactor APCs interaction chain from attackby to item_interaction (#82390)
## About The Pull Request
For how many lines this is, there's not a lot to really say.
In general, we simply move all item interactions from `attackby(...)` to
`item_interaction(...)`, split each item interaction off into a separate
proc, and make them all return the proper item interaction flags.
We _do_ kill some probably dead code, and remove a call to
`attackby(...)` elsewhere. Then, for clarity, we move the cell check
below the ID check so it can be next to the other item type checks, as
the priority between cell and ID is unlikely to matter anyway.
Other than what's described above and detailed below, each section's
functionality should be the same.
Now, for the parts that _do_ need to be explained more.
### Killing Probably Dead Code
Alright, so, the first part that does not have the cleanest transition.
https://github.com/tgstation/tgstation/blob/d38f9385b863e49f83455a227764d302629e2867/code/modules/power/apc/apc_attack.dm#L22-L23
Whatever the fuck this is.
Asking around, this seems to just be dead code.
For sanity's sake removing it and testing, silicon interactions with it
seem to work just fine.
So we kill it. We just kill it. We Just Kill It.
Closest we could find requires the distance check there to be false, so
it wouldn't apply. But it _does_ bring us to the second bit of weird
code.
### Calling APC Attackby Elsewhere?
So wallframes let you screwdriver them to put them up, which from a
comment seems to be because of cyborgs.
APC wallframes of course override this with their own implementation,
that allows you to also replace a damaged cover or frame like that!
https://github.com/tgstation/tgstation/blob/d38f9385b863e49f83455a227764d302629e2867/code/game/objects/items/apc_frame.dm#L29-L39
...By just calling the wholeass `attackby(...)` proc on the APC and
calling it a day.
But hey, this is where our previous splitting up comes in handy, because
we just have a `wallframe_act(...)` proc!
So we just call that instead.
```dm
var/obj/machinery/power/apc/mounted_apc = locate(/obj/machinery/power/apc) in get_turf(user)
mounted_apc.wallframe_act(user, src)
return ITEM_INTERACT_SUCCESS
```
...And not use single letter variables, while we're at it.
That should be all.
Remember to get snacks and drinks.
## Why It's Good For The Game
Split off 178 line `attackby(...)` item interaction chain into separate
procs called in `item_interaction(...)`.
Screwdrivering APC wallframes no longer calls the wholeass
`attackby(...)` on the APC, but just call the new sub-proc for the
specific interaction it cares about.
## Changelog
🆑
refactor: APCs have had their item interaction chain refactored. This
should functionally be the same, but please report any issues.
/🆑
* [NO GBP]Cells will only consider 0.1% of their charge when shocking a user. (#82456)
## About The Pull Request
Makes cells only consider 0.1% of their charge when calculating the
damage for shocking someone. This makes the minimum damage 20, and goes
up to 22 (previous behaviour, even though that's a shockingly small
difference) with a 50 MJ cell, which is the highest capacity crew can
get. This makes it inversely scale with the standard cell charge define,
so if that gets changed, cells will use a different composition of their
charge to consider.
## Why It's Good For The Game
Airlocks instantly critting people when shocked regardless of what's in
the grid wasn't previous behaviour.
* Oops. There we go.
* Oh, these two too.
---------
Co-authored-by: Pickle-Coding <58013024+Pickle-Coding@users.noreply.github.com>
Co-authored-by: SyncIt21 <110812394+SyncIt21@users.noreply.github.com>
Co-authored-by: Ghom <42542238+Ghommie@users.noreply.github.com>
Co-authored-by: MrMelbert <51863163+MrMelbert@users.noreply.github.com>
Co-authored-by: san7890 <the@san7890.com>
Co-authored-by: lessthanthree <83487515+lessthnthree@users.noreply.github.com>
Co-authored-by: Timberpoes <silent_insomnia_pp@hotmail.co.uk>
Co-authored-by: moocowswag <62126254+moocowswag@users.noreply.github.com>
Co-authored-by: _0Steven <42909981+00-Steven@users.noreply.github.com>
Co-authored-by: Archie700 <archie712@hotmail.com>
Co-authored-by: Blacklist897 <149209377+Blacklist897@users.noreply.github.com>
* cyborg inducer respects cell changes (#81002)
## About The Pull Request
cyborg inducers use the cell of the cyborg instead of the one in the
borg when it was inserted
also minor code cleanup
## Why It's Good For The Game
fixes#80956
## Changelog
🆑
fix: cyborg inducer respects cell changes
/🆑
* cyborg inducer respects cell changes
---------
Co-authored-by: jimmyl <70376633+mc-oofert@users.noreply.github.com>
* Engineering autolathe now prints engi inducers instead of science ones + boosts recharge rate of sci-printed inducers (#80126)
## About The Pull Request
Allows engineering to print/order engi inducers instead of science ones.
They have their own type of inducer, so its weird that the amount of
them is finite.
## Why It's Good For The Game
I thought this was the case when I made my crossbow PR, and it only is
craftable with an engineering one. Turns out engineering quickly ran out
of inducers to make them with since they only get three. Oops.
As for the science inducer charge buff, around half of my 400ish hours
in ss13 is engi, and not once have I been asked by a scientist if they
could have a better inducer. 500 charge vs 1000 charge is only a change
of clicking an apc again and waiting an extra second. Plus, the reason I
picked inducers as the item that the crossbow required in the first
place is that 95% of rounds they never once moved from the closet (and
people most certainly open said closet, since the insuls are almost
always gone.)
## Changelog
🆑
qol: Engineering now can print/order engi inducers instead of science's
purple ones.
bal: Sci inducers now recharge 1000 charge per go, just like engi ones
do.
/🆑
---------
Co-authored-by: Jacquerel <hnevard@ gmail.com>
Co-authored-by: san7890 <the@ san7890.com>
* Engineering autolathe now prints engi inducers instead of science ones + boosts recharge rate of sci-printed inducers
---------
Co-authored-by: KingkumaArt <69398298+KingkumaArt@users.noreply.github.com>
Co-authored-by: Jacquerel <hnevard@ gmail.com>
Co-authored-by: san7890 <the@ san7890.com>
* Improves the error message of inducer (#73183)
## About The Pull Request
Now instead of saying "Error unable to interface with device" it says
"Error: unable to interface with device".
## Why It's Good For The Game
The message now sounds better
## Changelog
🆑
spellcheck: Added a ":" to inducer error message
/🆑
* Improves the error message of inducer
---------
Co-authored-by: SuperSlayer <91609255+SuperSlayer0@users.noreply.github.com>
* Refactored 'IsAdvancedToolUser' into a macro plus relative trait. Tweaked 'can_hold_items'. (#54665)
The PR aims to allow advanced tool users to be defined by traits rather than a hardcoded proc.
Also necessary for the CanUseTopic refactor I'm working on, which will be PRed separately for atomization purposes.
This PR also fixes an inconsistency with can_hold_items (since monkeys can actually hold items).
* Refactored 'IsAdvancedToolUser' into a macro plus relative trait. Tweaked 'can_hold_items'.
Co-authored-by: Ghom <42542238+Ghommie@users.noreply.github.com>
* Renames a few variables. Also reorders fallback order again.
Renames item_state to inhand_icon_state
Renames mob_overlay_icon to worn_icon
Renames mob_overlay_state to worn_icon_state
worn_icon_state/mob_overlay_state now never gets used for inhands.
* Fixes some comments
* Fixes map issue
* Restart lints
* Properly resolves conflicts
About The Pull Request
This makes space suits use a cell and warm the wearer, This was handled by the handle_environment proc in the past with an override to make the suits work. This corrects this issue, and removes the override.
All space suits will have a cell installed at round start, this cell will last 15 min on average usage.
The cell cover can be toggled by alt+clicking (press the button), or using a crowbar (just pry it open) on the suit.
With the cover open you can remove the cell by using the suit in hand, or ctrl+clicking the suit.
As well with the cover open you can use a screwdriver to set the thermal regulator's temperature. The normal range is 20 c to 45 c, do not use an emag on the suit to increase the temperature range.
Examining the suit will report the temperature setting and the cells charge, if the cover is open you will also be able to see the type of cell that is in the suit.
Suit storage units will now charge the cells in suits, they will also require power to operate properly now.
Why It's Good For The Game
Space suits should be managing the wearers temp in space not using some override.
Lizards now have a portable heater in the form of any space suit.
Now that suits need a cell it is not as easy to spend all session in a space suit.
New interactions with hardsuits and emp's give nice combat buff to an underused item.
Nuke ops can raid xeno for some nice yellow cells, or science for a big old bluespace cell.
* Buffs the gygax, give some more support items for mechs in general since there isn't a need for a dedicated ammo bag for the gygax
* Wrong cell
* Fixed some stuff.
* I fucked up the wrench inhand good and proper yikes I am a dumb cat
* gave some inhands for the inducers
* Hopefully this adds the overlays for the wrench.
* Someone helped me make a much better wrench sprite after several failed attempts on my part due two tones being hard to make definable shapes with!
* update_icon() improvements
Fixes some update_icon() calls to properly call parent and use update_overlays() and update_icon_state().
The rest of obj/item fuck it
* Suggested fixes, also passes the linter
* I always forget . = ..() is faster than return ..() FOR SOME FUCKING REASON
* Actually this is better
* Signilzes datum/action to update its icon when its connected item does.
About The Pull Request
Adds 'notice' span class to all visible_messages which had no span class, making all those black messages blue.
Why It's Good For The Game
This should help differentiate action-messages from talking-messages in the chat. More actions will be blue, thus black talking-messages should pop out more.
* 1/4 done? maybe?
* more
* stuff
* incremental stuff
* stuff
* stuff & things
* mostly done but not yet
* stuffing
* stuffing 2: electric boogaloo
* Git Commit and the Kingdom of the Crystal Skull
* make it actually compile
* found more stuff
* fixes
* fix AI laws appearing out of order
* fix windows
* should be the remaining stuff
* this time for real
* i guess it should compile too
* fix sechuds
The component is initialized with any combination of three flags, EMP_PROTECT_SELF protects against effects that target the object itself, EMP_PROTECT_WIRES protects against wires being messed with similar to the NO_EMP_WIRES_1 flag which this PR removes, EMP_PROTECT_CONTENTS protects against things that are inside the object like organs, internal "non-virtual" power cells and the like
This enables (but doesn't introduce) new mechanics such as adding EMP shielding at runtime to any atom, or taking it away.
Plurality, capitalization, punctuation, and item icons have been
improved. Status displays now show the same text on examination that
they do visually. Inducers only show a success message when they
actually succeed.
SkyratBot