24 Commits

Author SHA1 Message Date
Useroth 59d74624b1 Upstream power stuff combined and shit (#27284)
* Converts arbitrary energy units to the joule. Fixes conservation of energy issues relating to charging cells. (#81579)

Removes all arbitrary energy and power units in the codebase. Everything
is replaced with the joule and watt, with 1 = 1 joule, or 1 watt if you
are going to multiply by time. This is a visible change, where all
arbitrary energy units you see in the game will get proper prefixed
units of energy.

With power cells being converted to the joule, charging one joule of a
power cell will require one joule of energy.

The grid will now store energy, instead of power. When an energy usage
is described as using the watt, a power to energy conversion based on
the relevant subsystem's timing (usually multiplying by seconds_per_tick
or applying power_to_energy()) is needed before adding or removing from
the grid. Power usages that are described as the watt is really anything
you would scale by time before applying the load. If it's described as a
joule, no time conversion is needed. Players will still read the grid as
power, having no visible change.

Machines that dynamically use power with the use_power() proc will
directly drain from the grid (and apc cell if there isn't enough)
instead of just tallying it up on the dynamic power usages for the area.
This should be more robust at conserving energy as the surplus is
updated on the go, preventing charging cells from nothing.

APCs no longer consume power for the dynamic power usage channels. APCs
will consume power for static power usages. Because static power usages
are added up without checking surplus, static power consumption will be
applied before any machine processes. This will give a more truthful
surplus for dynamic power consumers.

APCs will display how much power it is using for charging the cell. APC
cell charging applies power in its own channel, which gets added up to
the total. This will prevent invisible power usage you see when looking
at the power monitoring console.

After testing in MetaStation, I found roundstart power consumption to be
around 406kW after all APCs get fully charged. During the roundstart APC
charge rush, the power consumption can get as high as over 2MW (up to
25kW per roundstart APC charging) as long as there's that much
available.

Because of the absurd potential power consumption of charging APCs near
roundstart, I have changed how APCs decide to charge. APCs will now
charge only after all other machines have processed in the machines
processing subsystem. This will make sure APC charging won't disrupt
machines taking from the grid, and should stop APCs getting their power
drained due to others demanding too much power while charging. I have
removed the delays for APC charging too, so they start charging
immediately whenever there's excess power. It also stops them turning
red when a small amount of cell gets drained (airlocks opening and shit
during APC charge rush), as they immediately become fully charged
(unless too much energy got drained somehow) before changing icon.

Engineering SMES now start at 100% charge instead of 75%. I noticed
cells were draining earlier than usual after these changes, so I am
making them start maxed to try and combat that.

These changes will fix all conservation of energy issues relating to
charging powercells.

Closes #73438
Closes #75789
Closes #80634
Closes #82031

Makes it much easier to interface with the power system in the codebase.
It's more intuitive. Removes a bunch of conservation of energy issues,
making energy and power much more meaningful. It will help the
simulation remain immersive as players won't encounter energy
duplication so easily. Arbitrary energy units getting replaced with the
joule will also tell people more meaningful information when reading it.
APC charging will feel more snappy.

🆑
fix: Fixes conservation of energy issues relating to charging
powercells.
qol: APCs will display how much power they are using to charge their
cell. This is accounted for in the power monitoring console.
qol: All arbitrary power cell energy units you see are replaced with
prefixed joules.
balance: As a consequence of the conservation of energy issues getting
fixed, the power consumption for charging cells is now very significant.
balance: APCs only use surplus power from the grid after every machine
processes when charging, preventing APCs from causing others to
discharge while charging.
balance: Engineering SMES start at max charge to combat the increased
energy loss due to conservation of energy fixes.
/🆑

---------

Co-authored-by: SyncIt21 <110812394+SyncIt21@users.noreply.github.com>
Co-authored-by: Ghom <42542238+Ghommie@users.noreply.github.com>

* Corrects Suit Storage Unit charge rate  (#82192)

## About The Pull Request

Adjusts SSU charge rate according to the new conversion ratio. 

Betcha didn't know SSUs recharge suit and MOD cells? 

This number is actually supposed to be equal to the rate a recharger
station does it.
I don't know if we have some macro for it. 

## Changelog

🆑 Melbert
fix: Fixed Suit Storage Unit cell charging rate
/🆑

* Corrects EVA thermal regulator cell cost (#82195)

## About The Pull Request

Another unit not converted to watts / joules

## Changelog

🆑 Melbert
fix: Fixed space suit thermal regulators cell usage.
/🆑

* Fixing cell power usage (Part 1) (#82197)

## About The Pull Request
Yeah i am not about to create 30 different PR's to address 1 issue at a
time. The changes are small enough to be grouped together in bulk.

This fixes the following issues specified in #82196
- Borg & exosuit RCD (Fixes #82193)
- Motorized wheelchair
- Canister shielding
- Electrolyser
- Potato cell
- Space heater
- Microwave

## Changelog
🆑
fix: Fixed cell energy usage for a bunch of stuff(Part 1). See PR 82197
for details
/🆑

---------

Co-authored-by: Pickle-Coding <58013024+Pickle-Coding@users.noreply.github.com>

* Fixing cell power usage (Part 2) (#82198)

## About The Pull Request
Continuation of #82197.

Fixes these issues in #82196
- Cyborg self repair
- Cyborg lollipop dispenser
- Mauna mug
- Plasma cutter (Initial charge not the number of laser shots so partial
fix)

## Changelog
🆑
fix: Fixed more energy usages for cells(Part 2). See PR 82198 for
details
/🆑

---------

Co-authored-by: Pickle-Coding <58013024+Pickle-Coding@users.noreply.github.com>

* Fixing cell power usage (Part 3) (#82204)

## About The Pull Request
Continuation of #82198

Fixes these issues in #82196
- Borg hypo spray
- Borg projectile dampen
- Borg chameleon
- Firelance
- MODlink scryer
- Emergency light usage

## Changelog
🆑
fix: Fixed more energy usages for cells(Part 3). See PR 82204 for
details
/🆑

---------

Co-authored-by: Pickle-Coding <58013024+Pickle-Coding@users.noreply.github.com>

* [NO GBP]Fixes static power usage not always drawing the remaining energy of an APC cell. (#82205)

## About The Pull Request
Makes APC static power draw consume the remaining energy of the cell if
there's not enough energy.
## Why It's Good For The Game
Prevents a niche issue where an area composed entirely of static power
users with no dynamic users from running forever with no power supply.
## Changelog
🆑
fix: Fixes static power usage from being able to not draw power.
/🆑

* Fixes recharge stations charge rates (#82191)

## About The Pull Request
- Fixes #82190

Have to now use the assigned constants and not magic number `10000`.
Also stuff will take the exact charge needed without any wastage.

## Changelog
🆑
fix: recharge stations draw the same amount of power as before but
directly from grid(without using apc cell power) and won't waste any
excess power
/🆑

---------

Co-authored-by: san7890 <the@san7890.com>

* Fixes space heater power usage (#82208)

## About The Pull Request

Related to https://github.com/tgstation/tgstation/issues/82196 fixes the
space heater power cell usage relating to power per tile heated.

Space heater calculates the amount of power required to heat a tile, but
only uses power at the end of the processing loop. Fixes so the power
consumption matches the calculated usage per tile.

Reverts changes to space heater power efficiency in
https://github.com/tgstation/tgstation/pull/82197 that causes the heater
to instantly drain the cell.

Fixes https://github.com/tgstation/tgstation/issues/82228

## Changelog

🆑 LT3
fix: Fixes Schrödinger's space heater, where a space heater both
consumes a power cell instantly while also not consuming power when
heating adjacent tiles
/🆑

* General maintenance for reagent grinder (#82161)

## About The Pull Request

**1. Qol**
  - Adds examines & screentips for screwdriver, crowbar & wrench acts.
- Adds examines & screentips for inserting, replacing & removing beaker,
Also for inserting items from bags or directly
- Adds an off icon overlay for when the reagent grinder is either
screwed open or loses power,
 
**2. Code Improvements**
- Replaced `attackby()` with `item_interaction()` so we can end the
attack chain early for non combat operations like inserting beakers/
ingredients for grinding etc.
- Removed custom shake animations & replaced it with the global
`Shake()` proc cause it did the same thing
- Removed constructed version of reagent grinder. We instead just check
`mapload` to see if we need the beaker to be created or not for round
start reagent grinders
- Grinding & Juicing use the same `operate_for()` rather than having
seperate procs for each operation
- Removed trait `TRAIT_MAY_CONTAIN_BLENDED_DUST`. Why do we have this?
Its just used to change the grinder description to warn it may contain
dust. It's a waste.
  
**3. Fixes**
- You cannot insert hologram items into the grinder. Rather than
destroying that item & making it vanish you simply won't be allowed to
put it inside the grinder so you can save that item
- You can hit the grinder with items like screwdriver, wrench, crowbar,
beaker & even with stuff you would normally put in the grinder when in
combat mode
  - Adds `can_interact()` checks for using the UI & other stuff 
- Fixes #46356. All items of type `obj/item/grown` can be put from any
bag into the grinder
- The item "and its contents" are now grinded/juiced recursively to get
all the reagents it has to offer just like a real grinder would
- An AI/Human with AI access examining the reagent grinder now actually
works.
 
**4. Refactors**
- The grinder now measures its available capacity based on the "total
weight" of all items present & not its number. This is more realistic
because the grinder has limited space inside & so inserting huge items
should have greater impact rather than deciding on an arbitrary number
like 10(The grinder having the capacity for 10 items of any size inside
its small compartment makes no sense). Examines are displayed to show
how much capacity of the grinder has been filled. Upgrading the grinder
with better matter bins will allow for higher storage capacities.
- Total power consumed is measured based on the duration & weight of all
items grinded cause you know its realistic.


🆑
qol: adds examines & screentips for tool acts & other operations for
reagent grinder
qol: adds an off icon for when the grinder panel is open/not powered
code: auto docs vars & procs. Shared common proc for grinding or juicing
code: removed trait for blended dust, changed some item interactions to
end the attack chain early & save time
fix: no inserting hologram items into the reagent grinder
fix: you can hit the reagent grinder tools like screwdriver, wrench,
crowbar & even beakers/ingredients etc when in combat mode
fix; adds sanity checks for when & how mobs interact with the reagent
grinder
fix: examining a reagent grinder by an AI/Human with AI access now
actually works.
fix: you can insert Nova flowers & other food items from any bag type
fix: reagent grinder now grinds all the contents of an item recursively
to produce maximum reagents like a real grinder would
refactor: reagent grinder now measures available capacity to store items
as total weight of stored items & not number. Capacity can be increased
with upgraded matter bin
refactor: reagent grinder power usage is now a function of duration &
total weight of items blended, meaining blending more number of
items/larger items will consume more power
refactor: reagent grinder code has been optimized overall. Report bugs
on github
/🆑

---------

Co-authored-by: Timberpoes <silent_insomnia_pp@hotmail.co.uk>

* Suit Storage Units / Inducers can charge MODsuits without necessitating them be screwdrivered opened  (#82194)

## About The Pull Request

So MODsuits do this thing here with `get_cell` in that they don't return
anything when they're closed


![image](https://github.com/tgstation/tgstation/assets/51863163/416f8ef5-3bfc-4d2c-a12f-029f051d6692)

And I... can't tell why they do this. 

I looked through every use of `get_cell` and the only things affected by
this are
A. Suit Storage Units, which I believe have always been intended to
charge MODsuits?
and
B. Inducers

So I removed the `open` check. Allowing both Inducers and Suit Storage
Units to charge mods without needing you screwdriver their panel open
first.

I also took the opportunity to allow SSUs to charge multiple items at
once (divvying charge accross all items)

## Why It's Good For The Game

I asked Fikou and they said it was "probably not" intended that you need
to screwdriver them open so yeah.

I think I remember charging my MODs during the original test merges
years back but I can't remember if I opened the suit first when I did or
not.

Either way, it's not super intuitive. Though it's already not very
intuitive that SSUs charge things.

## Changelog

🆑 Melbert
qol: Suit Storage Units charge MODsuits while their cell panel is closed
or open, rather than only when screwed open
qol: Inducers can charge MODsuits while their cell panel is closed or
open, rather than only when screwed open
qol: Suit Storage Units will charge all items within simultaneously (if
possible)
/🆑

---------

Co-authored-by: san7890 <the@san7890.com>

* Fixes modular computer boot-up (#82254)

## About The Pull Request

Fixes a bug where modular computers (specifically PDAs) will fail to
start up if there is zero required application power draw.

PDA will now consume base active power usage during startup.

Related https://github.com/tgstation/tgstation/issues/82196
Fixes https://github.com/tgstation/tgstation/issues/82245
Fixes https://github.com/tgstation/tgstation/issues/82229

## Changelog

🆑 LT3
fix: Fixed modular computers failing to boot up using cell power (eg:
contractor tablet)
/🆑

* Fixing cell power usage (Part 4) (#82227)

## About The Pull Request
Continuation of #82204

Fixes these issues in #82196
- Cyborg Electroadaptive Pseudocircuit
- Defib EMP
- Cell EMP
- `/datum/action/cooldown/mob_cooldown/charge_apc` stuff
- Mecha movement, melee, light ,weapon & tool energy drains
- Ninja drain

## Changelog
🆑
fix: Fixed more energy usages for cells(Part 4). See PR 82227 for
details
/🆑

---------

Co-authored-by: Pickle-Coding <58013024+Pickle-Coding@users.noreply.github.com>

* Fixing cell power usage (Part 5) (#82296)

## About The Pull Request
Continuation of #82227

Fixes these issues in
https://github.com/tgstation/tgstation/issues/82196 and others that
weren't noticed.
- Batton emp protection
- Cyborg stun arm
- Cyborg energy sword
- Cyborg hug attack
- Mechanical god religious sect charge check
- Mecha fixes
  - Phasing energy drain
  - Short circuit energy drain
  - Durand shield damage energy drain
  - Plasma engine recharge rate
- Mechbay recharge power rate
- Recharge station charge rate

Stuff that was already working & didn't require fixing.
- Plasma cutter energy shots
- Botany cell charging

## Changelog
🆑
fix: Fixed cell energy usage for a bunch of stuff(Part 5). See PR 82296
for details
/🆑

---------

Co-authored-by: Pickle-Coding <58013024+Pickle-Coding@users.noreply.github.com>

* Ties power limit of anchored circuits to 20 * standard cell charge to make it consistent with power changes. (#82287)

## About The Pull Request
It just makes the power requirement 20 * standard cell charge instead of
20000
## Why It's Good For The Game
This is too restrictive to make anything with.



https://github.com/tgstation/tgstation/assets/62126254/e39dcf27-8793-42b0-84a0-7f747e95efcc
## Changelog
🆑
fix: anchored circuits no longer blow up after 2 components are used.
/🆑

---------

Co-authored-by: Pickle-Coding <58013024+Pickle-Coding@users.noreply.github.com>

* Space heater power and heating tweaks (#82344)

## About The Pull Request
- Fixes #82342
- Space heater computes total power for heating adjacent turfs and uses
cell energy once rather multiple times per turf
- Improvised space heater actually works & uses beaker heat capacity and
not a constant of 200 for heating beaker contents

## Changelog 
🆑 SyncIt21,Pickle-Coding
fix: space heater(including improvised) turns off when cell is drained
fix: optimized power usage for both improvised and main space heater.
Improvised heater now works & uses beaker heat capacity
/🆑

* Improved lathe error message (#82260)

## About The Pull Request

Improves the auto/protolathe low charge error message. Instead of simply
saying low power, it will tell you how long until it has enough charge
to print.


![image](https://github.com/tgstation/tgstation/assets/83487515/a2aebd3e-b7bf-4a13-ae7a-6c1cc14c9057)

## Why It's Good For The Game

Less mashing the lathe over and over with no idea how much APC charge it
needs to start printing again

## Changelog

🆑 LT3
code: APCs can now calculate time-to-charge
qol: Overloaded lathes will now tell you the wait time until they're
ready to print again
/🆑

---------

Co-authored-by: san7890 <the@san7890.com>

* Fixes issues with multitools on power objects (#82389)

## About The Pull Request

So at some point the power object's `multitool_act(...)` proc was set to
_always_ block, for what I could find to be no discernable reason.

### The Main Thing


https://github.com/tgstation/tgstation/blob/d38f9385b863e49f83455a227764d302629e2867/code/modules/power/power.dm#L62-L74
Now, of course, it shouldn't, because this cuts the entire chain short
and thus blocks any other multitool interactions. Like opening the wires
panel with a multitool, in this case. Even if `can_change_cable_layer`
were to be false and thus the object would never actually care about
having this interaction, it'd _still_ block it.

So we don't do that. But what _do_ we do?
I decided to just split off the actual cable changing part into its own
proc, `cable_layer_act(...)`.
```dm
/obj/machinery/power/proc/cable_layer_act(mob/living/user, obj/item/tool)
	var/choice = tgui_input_list(user, "Select Power Line For Operation", "Select Cable Layer", GLOB.cable_name_to_layer)
	if(isnull(choice))
		return ITEM_INTERACT_BLOCKING

	cable_layer = GLOB.cable_name_to_layer[choice]
	balloon_alert(user, "now operating on the [choice]")
	return ITEM_INTERACT_SUCCESS
```
Which is then called on `multitool_act(...)`, if
`can_change_cable_layer` is true.
```dm
/obj/machinery/power/multitool_act(mob/living/user, obj/item/tool)
	if(can_change_cable_layer)
		return cable_layer_act(user, tool)
```
Which continues with the chain if we can't change layers by default, and
otherwise lets `cable_layer_act(...)` work out whether we should block
or continue.
Notably, we've removed the `cable_layer_change_checks(...)` proc from
the equation, and just let inheritors override it to add their own
preconditions and what flags they should return.
On its own this fixes the APC wire panel interactions, but also lets us
just return `NONE` when we need to.
```dm
/obj/machinery/power/emitter/cable_layer_act(mob/living/user, obj/item/tool)
	if(panel_open)
		return NONE
	if(welded)
		balloon_alert(user, "unweld first!")
		return ITEM_INTERACT_BLOCKING
	return ..()
```

### The OTHER Things

While doing this I noticed there's actually very little sanity checks
after we close our input list.
```dm
var/choice = tgui_input_list(user, "Select Power Line For Operation", "Select Cable Layer", GLOB.cable_name_to_layer)
if(isnull(choice))
	return ITEM_INTERACT_BLOCKING
```
We only care about whether we made a choice!
Testing this, lo and behold, this can cause runtimes if the power object
gets qdeleted before you close the menu.
As a funny side, it _also_ doesn't care about whether you're on the
other side of the station, while your multitool is on a different
z-level, or just doesn't exist anymore.
So we just add a few basic sanity checks while we're at it.
```dm
var/choice = tgui_input_list(user, "Select Power Line For Operation", "Select Cable Layer", GLOB.cable_name_to_layer)
if(isnull(choice) || QDELETED(src) || QDELETED(user) || QDELETED(tool) || !user.Adjacent(src) || !user.is_holding(tool))
	return ITEM_INTERACT_BLOCKING
```
That's all. Having done some basic testing, I believe the behaviour is
otherwise unaffected.
## Why It's Good For The Game

It's annoying to need to swap to an empty hand or wirecutters to
interact with APC, emitter, or tesla coil wires.
This fixes that. (Fixes #81745.)
...and then a few other tidbits I realized existed.
## Changelog
🆑
fix: Fix using a multitool on a power object with wires not actually
opening the wires menu when it should.
fix: Fix a runtime from a power object being deleted before selecting
what cable layer to put it at.
fix: Fix power object cable changing not caring about whether you were
still adjacent, still holding your multitool, or whether it even still
existed after the selection menu was closed.
/🆑

* Updates cyborg cells created from borgifier to the SI standard (#82437)

## About The Pull Request

Unchanged value in transformer.dm resulted in borg charge draining to
zero immediately after forced conversion in the borgifer. Changing the
value of robot cell charge to 5 MJs to fix this.
## Why It's Good For The Game

Fixes #82426
## Changelog
🆑
fix: changed value of cell charge from 5000 to 5 megajoules
/🆑

* cell chargers now bypass APCs (#82309)

## About The Pull Request
This makes cell chargers and suit storage units draw from the grid
before the local apc

## Why It's Good For The Game
Upgraded Cell chargers have a charging power of 1MW leading to them
instantly draining the apc of any room they are in,
this Pr makes them draw from the grid preventing immediate blackout. 
This is a stopgap until someone smarter than me changes power values so
a pocket-sized battery won't require the same power to charge then over
600 average suburban homes.

## Changelog
🆑
balance: suit and cell chargers should draw from grid preventing instant
apc blackouts in most cases.
/🆑

* Let ethereals starve again (#82308)

## About The Pull Request

Ethereals use energy as 'food', so of course #81579 had to touch them.
To bring them in line with the new standard, the Ethereal charge levels
were updated to be in megajoules.

https://github.com/tgstation/tgstation/blob/466b3df0483162c3900e411c25dfe15c2320786e/code/__DEFINES/mobs.dm#L292-L299

https://github.com/tgstation/tgstation/blob/7fa8daad63f49a11e22ab64a984d29b35619852c/code/__DEFINES/mobs.dm#L285-L292
However! This forgot to update the rate at which Ethereals passively
discharge.

https://github.com/tgstation/tgstation/blob/7fa8daad63f49a11e22ab64a984d29b35619852c/code/modules/surgery/organs/internal/stomach/stomach_ethereal.dm#L11-L14

https://github.com/tgstation/tgstation/blob/7fa8daad63f49a11e22ab64a984d29b35619852c/code/__DEFINES/mobs.dm#L437
Meaning it's effectively a thousand times less with the new charge
levels.

So we simply update this define to be in kilowatts.
```dm
#define ETHEREAL_CHARGE_FACTOR (0.8 KILO WATTS) //factor at which ethereal's charge decreases per second
```
## Why It's Good For The Game

Fixes issue with ethereal hunger caused by #81579.
## Changelog
🆑
fix: Ethereal starvation has been updated to the new joules/watts
standard. Congratulations Ethereals! You can starve again!
/🆑

* [NO GBP]Fixes ethereal charging and recharge station charge speed. (#82483)

## About The Pull Request
Fixes many instances of things not charging ethereals properly. Scales
all things that are meant for charging/taking from the ethereal stomach
by STANDARD_CELL_CHARGE, so we never run into this issue again. Ethereal
stomachs now store a cell inside them, and uses that for the charge
instead of tracking a variable. Fixes recharging stations not being able
to charge ethereal stomachs. The ethereal signal proc attempted to feed
a callback datum to adjust_charge(), which caused a runtime. Changes
that by invoking the charge_cell callback instead.

Also fixes recharge station charging speed. They weren't converted
correctly. Also formats their charging speed in their description, and
displays power rather than referencing cycles.
## Why It's Good For The Game
So ethereals charge properly.

Closes #82470
## Changelog
🆑
fix: Fixes many instances of energy sources for ethereals supplying a
thousand times less energy than intended.
fix: Fixes recharging stations not being able to charge ethereals.
fix: Fixes recharge stations charging too fast.
qol: Recharge stations display their recharging speed in formatted
power, rather than unformatted energy per cycle.
/🆑

---------

Co-authored-by: san7890 <the@san7890.com>

* Update lead acid batteries charge values (#82510)

## About The Pull Request

So during the whole power consistency update thing, it seems lead acid
batteries were entirely forgotten about.
Which, well, is easy, because they never actually used
`STANDARD_CELL_CHARGE`.

https://github.com/tgstation/tgstation/blob/c34d56a45b0461f5e0fad3cc75e81580c3357119/code/game/objects/items/maintenance_loot.dm#L32-L33
Looking into it, the previous value for `STANDARD_CELL_CHARGE` seemed to
have been 1000, so we convert it directly:
```dm
maxcharge = STANDARD_CELL_CHARGE * 20
chargerate = STANDARD_CELL_CHARGE * 1.4
```
But, comparing this to the normal power cells, it seems their charge
rates got _halved_ during the update.
So, we do that too.
```dm
maxcharge = STANDARD_CELL_CHARGE * 20
chargerate = STANDARD_CELL_CHARGE * 0.7
```
And that fixes it.
## Why It's Good For The Game

Fixes lead acid batteries still using the old power amounts, and not
being relative to `STANDARD_CELL_CHARGE`.
## Changelog
🆑
fix: Lead acid batteries have had their power values fixed.
/🆑

* This should do for modular code, for now.

* Fixing cell power usage (Part 5) (#82296)

Continuation of #82227

Fixes these issues in
https://github.com/tgstation/tgstation/issues/82196 and others that
weren't noticed.
- Batton emp protection
- Cyborg stun arm
- Cyborg energy sword
- Cyborg hug attack
- Mechanical god religious sect charge check
- Mecha fixes
  - Phasing energy drain
  - Short circuit energy drain
  - Durand shield damage energy drain
  - Plasma engine recharge rate
- Mechbay recharge power rate
- Recharge station charge rate

Stuff that was already working & didn't require fixing.
- Plasma cutter energy shots
- Botany cell charging

🆑
fix: Fixed cell energy usage for a bunch of stuff(Part 5). See PR 82296
for details
/🆑

---------

Co-authored-by: Pickle-Coding <58013024+Pickle-Coding@users.noreply.github.com>

* [NO GBP]Fixes some mapped SMES starting with low energy. (#82203)

## About The Pull Request
Scales them all by up to 20 to account for removing the dumb SMESRATE
define. This isn't a 100% conversion for every SMES because it would go
beyond their capacity (old SMES use to duplicate cell energy, so they
had a higher capacity than their cell parts imply). Also removes
instances of varediting their capacity to fucking 1e+600 and replaces
them with magical SMES.
## Why It's Good For The Game
So lavaland and crap don't instantly run out of power. Also I don't
think we should be varediting anything to 1e+600.
## Changelog
🆑
fix: Fixes lavaland SMES and other crap from not starting with enough
energy.
fix: The pirate SMES are now magical instead of secretly infinite.
/🆑

* Mechbay & modsuit recharger tweaks (#82337)

## About The Pull Request
- Both mechbay & modsuit rechargers now waste a small amount of energy
as heat like it did before
- Fixes #82332. Mechbay recharger displays the energy of the mech in
joules & charges the cell with the exact energy required directly from
the grid thus not causing the room to blackout

## Changelog
🆑
fix: Mechbay & modsuit rechargers waste a small amount of energy as heat
fix: Mechbay recharger console displays mech charge as joules & charges
directly from the grid thus sparing the rooms apc cell from huge loads
/🆑

* Refactor APCs interaction chain from attackby to item_interaction (#82390)

## About The Pull Request

For how many lines this is, there's not a lot to really say.
In general, we simply move all item interactions from `attackby(...)` to
`item_interaction(...)`, split each item interaction off into a separate
proc, and make them all return the proper item interaction flags.
We _do_ kill some probably dead code, and remove a call to
`attackby(...)` elsewhere. Then, for clarity, we move the cell check
below the ID check so it can be next to the other item type checks, as
the priority between cell and ID is unlikely to matter anyway.
Other than what's described above and detailed below, each section's
functionality should be the same.

Now, for the parts that _do_ need to be explained more.

### Killing Probably Dead Code

Alright, so, the first part that does not have the cleanest transition.

https://github.com/tgstation/tgstation/blob/d38f9385b863e49f83455a227764d302629e2867/code/modules/power/apc/apc_attack.dm#L22-L23
Whatever the fuck this is.

Asking around, this seems to just be dead code.
For sanity's sake removing it and testing, silicon interactions with it
seem to work just fine.
So we kill it. We just kill it. We Just Kill It.

Closest we could find requires the distance check there to be false, so
it wouldn't apply. But it _does_ bring us to the second bit of weird
code.

### Calling APC Attackby Elsewhere?
So wallframes let you screwdriver them to put them up, which from a
comment seems to be because of cyborgs.
APC wallframes of course override this with their own implementation,
that allows you to also replace a damaged cover or frame like that!

https://github.com/tgstation/tgstation/blob/d38f9385b863e49f83455a227764d302629e2867/code/game/objects/items/apc_frame.dm#L29-L39
...By just calling the wholeass `attackby(...)` proc on the APC and
calling it a day.

But hey, this is where our previous splitting up comes in handy, because
we just have a `wallframe_act(...)` proc!
So we just call that instead.
```dm
var/obj/machinery/power/apc/mounted_apc = locate(/obj/machinery/power/apc) in get_turf(user)
mounted_apc.wallframe_act(user, src)
return ITEM_INTERACT_SUCCESS
```
...And not use single letter variables, while we're at it.

That should be all.
Remember to get snacks and drinks.
## Why It's Good For The Game

Split off 178 line `attackby(...)` item interaction chain into separate
procs called in `item_interaction(...)`.
Screwdrivering APC wallframes no longer calls the wholeass
`attackby(...)` on the APC, but just call the new sub-proc for the
specific interaction it cares about.
## Changelog
🆑
refactor: APCs have had their item interaction chain refactored. This
should functionally be the same, but please report any issues.
/🆑

* [NO GBP]Cells will only consider 0.1% of their charge when shocking a user. (#82456)

## About The Pull Request
Makes cells only consider 0.1% of their charge when calculating the
damage for shocking someone. This makes the minimum damage 20, and goes
up to 22 (previous behaviour, even though that's a shockingly small
difference) with a 50 MJ cell, which is the highest capacity crew can
get. This makes it inversely scale with the standard cell charge define,
so if that gets changed, cells will use a different composition of their
charge to consider.

## Why It's Good For The Game

Airlocks instantly critting people when shocked regardless of what's in
the grid wasn't previous behaviour.

* Oops. There we go.

* Oh, these two too.

---------

Co-authored-by: Pickle-Coding <58013024+Pickle-Coding@users.noreply.github.com>
Co-authored-by: SyncIt21 <110812394+SyncIt21@users.noreply.github.com>
Co-authored-by: Ghom <42542238+Ghommie@users.noreply.github.com>
Co-authored-by: MrMelbert <51863163+MrMelbert@users.noreply.github.com>
Co-authored-by: san7890 <the@san7890.com>
Co-authored-by: lessthanthree <83487515+lessthnthree@users.noreply.github.com>
Co-authored-by: Timberpoes <silent_insomnia_pp@hotmail.co.uk>
Co-authored-by: moocowswag <62126254+moocowswag@users.noreply.github.com>
Co-authored-by: _0Steven <42909981+00-Steven@users.noreply.github.com>
Co-authored-by: Archie700 <archie712@hotmail.com>
Co-authored-by: Blacklist897 <149209377+Blacklist897@users.noreply.github.com>
2024-04-12 06:33:40 +02:00
SkyratBot fdcfabefd8 [MIRROR] Integrated circuits for modular computers (#26196)
Integrated circuits for modular computers (#80530)

This PR integrates circuits for modular computers and a good bits of
their programs.
The peculiarity here is that modular computers have no fixed amount of
unremovable components (except the base one with just a couple ports for
now), instead, they're added and removed along with programs. With a few
exceptions (such as the messenger and signaler), for these program
circuits to work, their associated program has to be either open or in
the background.

For a reason or another, not all programs have a circuit associated to
them, still, however the programs with a circuit are still a handful.
They are:
- Nanotrasen Pay System
- Notepad
- SiliConnect
- WireCarp
- MODsuit Control
- Spectre Meter
- Direct Messenger*
- LifeConnect
- Custodial Locator
- Fission360
- Camera
- Status Display
- SignalCommander

*By the by, sending messages has a cooldown, so it shouldn't be as
spammy. If it turns out to not be enough, I can make it so messages from
circuit will be ignored by other messenger circuits.

The PR is no longer WIP.

I believe modular computers could make for some interesting setups with
circuits, since they're fairly flexible and stocked with features unlike
many other appliances, therefore also a speck more abusable, though
limits, cooldowns, logging and sanitization have been implemented to
keep it in check.

🆑
add: Modular Computers now support integrated circuits. What can be done
with them depends on the programs installed and whether they're running
(open or background).
add: Modular Consoles (the machinery) now have a small backup cell they
draw power from if the power goes out.
/🆑

Co-authored-by: Ghom <42542238+Ghommie@users.noreply.github.com>
2024-01-21 14:59:14 +00:00
Gandalf 9361376345 PDA update (Messenger works while dead, Microwave works, etc). (#80069) [REMIRROR] (#25829)
* PDA update (Messenger works while dead, Microwave works, etc). (#80069)

This is an update that touches many more things all at once (compared to
my other PRs) meant to make PDAs in general feel more consistent and not
take away from one of the experiences we want to encourage: interaction
between players.

1. Replaced all checks of a 'pda' with a 'modular pc'. This means
technically (though not done in-game currently) other modpcs can hold an
uplink, and microwaves can charge laptops.
2. Speaking of microwave, they now don't break and require
deconstruction if the cell is removed mid-charge.
3. When a Mod PC is out of power, it will now allow the Messenger to
work (which now also doesn't consume any additional power), if the app
exists on the PC. Here's a video demonstration

https://github.com/tgstation/tgstation/assets/53777086/7ae12f81-a271-49b8-95fa-2ba54d2e2d1f

4. Flashlights can't be turned on while the cell is dead
5. I replaced a bunch of program vars with ``program_flags`` and renamed
``usage_flags`` to ``can_run_on_flags``.
6. Added a debug modPC that has every app installed by default. Mafia
had some issues in the past that were unknown because Mafia wasn't
preinstalled with any tablet so was never in create & destroy nor in any
other unit test. This was just an easy solution I had, but PDAs should
get more in-depth unit tests in the future for running apps n stuff- I
just wanted to make sure no other apps were broken/harddeling.

Currently when a PDA dies, its only use is to reply to PDA messages sent
to you, since you can still reply to them. Instead of just fixing it and
telling players to cope, I thought it would be nice to allow PDA
Messenger to still work, as it is a vital app.
You can call it some emergency power mode or whatever, I don't really
mind the reason behind why it is this way.

When I made cells used more on PDAs, my main goal was to encourage
upgrading your PDA and/or limiting how many apps you use at once, I did
not want this to hit on players who use it as a form of interaction.
This is the best of both worlds, I think.

The rest of the changes is just for modularity, if some downstream wants
to add tablets, phone computers, or whatever the hell else, they can
still get just as far as PDAs should be able to get to, hopefully.

🆑
add: PDAs with a dead power cell are now limited to using their
Messenger app.
fix: Microwaves now stop charging PDAs if the cell was removed
mid-charge.
fix: Microwaves can now charge laptops.
fix: PDA Flashlights can't be turned on while the PDA is dead.
fix: You can now hold a laptop up to a camera (if it has a notekeeper
app installed) like PDAs already could.
/🆑

---------

Co-authored-by: lessthanthree <83487515+lessthnthree@users.noreply.github.com>

* ok

---------

Co-authored-by: John Willard <53777086+JohnFulpWillard@users.noreply.github.com>
Co-authored-by: lessthanthree <83487515+lessthnthree@users.noreply.github.com>
2023-12-24 23:20:11 +00:00
SkyratBot d34aab9be3 [MIRROR] PDA general maintenance (NTNet downloader rework) [MDB IGNORE] (#25133)
* PDA general maintenance (NTNet downloader rework)

* Update modular_computer.dm

* e

* weh

* Update archive_viewer.dm

* Update three_layer_hats.json

---------

Co-authored-by: John Willard <53777086+JohnFulpWillard@users.noreply.github.com>
Co-authored-by: Gandalf <9026500+Gandalf2k15@users.noreply.github.com>
2023-12-24 22:28:40 +00:00
SkyratBot 49daf536b5 [MIRROR] [BOUNTY] Re-adds Contractors [MDB IGNORE] (#25094)
* [BOUNTY] Re-adds Contractors

* I hate copy pasted overrides so much. BEGONE

* Fixes the merge conflict. It's still not gonna work, too many proc redefinition

* The sheer amount of overrides

* This is hell

* remove modular copy of spawn_contractor_partner

* part 2 of spawn_contractor_partner oops

* un-duplicate create_contracts proc

* Remove duplicate contract generate and finish_enter

* something to make the linter stop crying

* Receiving

* removes our contractor stuff in favour of parity

* Update SyndicateContractor.tsx

---------

Co-authored-by: John Willard <53777086+JohnFulpWillard@users.noreply.github.com>
Co-authored-by: Giz <13398309+vinylspiders@users.noreply.github.com>
Co-authored-by: GoldenAlpharex <jerego1234@hotmail.com>
Co-authored-by: Funce <funce.973@gmail.com>
Co-authored-by: Gandalf <9026500+Gandalf2k15@users.noreply.github.com>
2023-12-24 22:00:55 +00:00
SkyratBot c34c9418c3 [MIRROR] Tablet UI update (mostly fixes) [MDB IGNORE] (#20802)
* Tablet UI update (mostly fixes) (#74844)

## About The Pull Request

Tablet UIs are now changed when opening/closing an app, instead of
constantly checking for a UI change every ui update.

Program UI acts no longer call parent, as it was unnecessary, Computers
are the ones that should be calling it.

Fixes a ton of problems with static data not updating, such as in
Messenger, ID management, Siliconnect, and Chat client

Chat Client's Admin mode also works again, which was broken when
accesses to check was turned into a list.

Turns a few lists in Robocontrol into static ones when we aren't
changing anything, and makes it actually scan your ID's access.

Fixes budget ordering being unable to show the cart/call the cargo
shuttle.

## Why It's Good For The Game

While I can't seem to find a single issue report on any of the above,
these are still problems that should be fixed.

## Changelog

🆑
fix: SiliConnect can download borg logs again.
fix: The RD can once again enable Admin mode on Wirecarp
fix: NT IRN can once again see the shopping cart and call the cargo
shuttle.
fix: Chat Client, ID Management and Messenger should now update their
UIs properly.
code: PDAs will hopefully not lag as much when clicking on buttons (such
as in ID management).
/🆑

* Tablet UI update (mostly fixes)

---------

Co-authored-by: John Willard <53777086+JohnFulpWillard@users.noreply.github.com>
2023-04-27 15:10:12 +01:00
SkyratBot cb3b675bae [MIRROR] Tablets don't close their UI when changing program (and some fixes) [MDB IGNORE] (#19600)
* Tablets don't close their UI when changing program (and some fixes) (#73635)

## About The Pull Request

- Tablets now refresh their page when changing programs, this means the
UI will no longer close and reopen itself several times (or even have
several UIs open if shit broke hard enough).
- Removed tablet's attack self because interact already does everything
it had to do.
- Header programs now close when minimized (as there's no button to
close them in the main menu.
- Removed a lot of program UI stuff, it's now handled by the PC itself,
such as header data and ui host.
- Cut off asset sending from TGUI into it's own proc so I can re-send
assets when changing programs
- Added an ejection button for machine computers
- Fixed ID not ejecting into the user's hand when using 'Eject ID'
- Fixes a minor runtime when opening the MODsuit application without a
MODsuit already connected.

## Why It's Good For The Game

Fixes some bugs that I found with tablets

UIS now won't be flickering as bad in front of them, or have
inconsistent placement (like when you move your main menu UI, go to
Messenger, then it's back to the center of the screen).

Video of it in action

https://user-images.githubusercontent.com/53777086/221301417-78321149-0c10-475e-bd29-79f5a4ba0597.mp4

## Changelog

🆑
fix: Being in an application now properly uses the tablet's battery.
fix: Messenger and Themify apps now close when minimized, so don't count
towards the running app limit.
fix: Tablet UIs will now no longer spam open/close the UI when changing
applications
fix: Using the Eject ID button on tablets now ejects into your hand.
fix: Computers now have an Eject ID button
refactor: Cut down a lot of copy paste in tablet & program code, now
it's mostly done by the tablet.
/🆑

* Tablets don't close their UI when changing program (and some fixes)

* Update contractor_tablet.dm

* wew

---------

Co-authored-by: John Willard <53777086+JohnFulpWillard@users.noreply.github.com>
Co-authored-by: Zonespace <41448081+Zonespace27@users.noreply.github.com>
Co-authored-by: Gandalf <9026500+Gandalf2k15@users.noreply.github.com>
2023-03-10 06:09:10 +00:00
SkyratBot 9e981753ca [MIRROR] Reworked PDA menu & NtOS themes [MDB IGNORE] (#19390)
* Reworked PDA menu & NtOS themes (#73070)

## About The Pull Request

This is a port/rework of
https://github.com/yogstation13/Yogstation/pull/15735 - I changed a lot
of how it acted (some themes are locked behind maintenance apps).

The original author allowed this port to happen, and I really liked how
it looked there so I'd like to add it here.

### Applications

Removes the hardware configurator application, as all it did was show
you your space and battery now that all hardware was removed. These are
things your PC does by default, so it was just a waste of space.
Adds a Theme manager application instead, which allows you to change
your PDA's theme at will.
Adds a new Maintenance application that will give a new theme, however
it will also increase the size of the theme manager app itself as it's
bloatware.

### Menu

There's now a bar at the top of the menu showing 'special' tablet apps
which, for one reason or another, should stand out from the rest of the
apps. Currently this is PDA messenger and the Theme manager

Flashlight and Flashlight color is now only an icon, and is shown on the
same line as Updating you ID

https://cdn.discordapp.com/attachments/961874788706574386/1069621173693972551/2023-01-30_09-10-52.mov

![image](https://user-images.githubusercontent.com/53777086/215501361-5ea3086e-2ff5-4ab1-bde4-8a3d14014fce.png)

### Themes

Adds a lot of themes to choose from, although SOME are hidden behind
Maintenance applications, which will give you a random theme. These are
bloatware however, so they come with some extra cost to the app's
required space storage.

Themes are now supported on ALL APPLICATIONS! If you have a computer
theme, you will have that theme in EVERY app you enter, rather than just
a select few.
ALSO also, emagging the tablet will automatically set & unlock the
Syndicate theme, which makes your PDA obvious but you can disguise it if
you wish through just re-painting it to something else.

https://cdn.discordapp.com/attachments/828923843829432340/1069565383155122266/2023-01-30_05-29-53.mov

### Preferences

This also adds a pref for theme, reworking the ringtone code to work
with it as well. I also removed 2 entirely unused PDA prefs just 'cause.

Screenshot not up-to-date, they now have proper names.

![image](https://user-images.githubusercontent.com/53777086/215463669-0fe9951a-71f8-4b71-a97d-b79b5a2f945a.png)

### Other stuff

Made defines for device_themes
Added support for special app-side checks to download files
Fixed programs downloading themselves TWICE because defines all had the
same definition
Removes the Chemistry computer disk as it was empty due to chemistry
app's removal
Removes the 'run_emag' proc, since apps can directly refer to the
computer to check for emag status instead.
Moved over and added better documentation on data computer files, and
moved the ordnance ones to the same file as the others.

## Why It's Good For The Game

It makes PDAs a lot more customizable while adding more features to
maintenance applications. I think the themes look cool and it fits with
PDAs being "personal" anyways.

I also explained most of my other arguments in the about section, such
as the hardware configuration application.

## Changelog

🆑 Chubbygummibear & JohnFulpWillard
add: A ton of new NtOS themes, which are accessible by the new Themify
application that comes with all PCs.
add: Emagging a PC now defaults it to the Syndicate option (and adds it
to go back to it if you wish)
add: There's a new maintenance app that gives you rarer themes
qol: The NtOS Main menu was moved around, added "header" applications
that are shown where the Flashlight is, such as your Theme manager and
PDA messenger.
code: Made defines for device_themes
code: Added support for special app-side checks to download files
code: Removes the 'run_emag' proc, since apps can directly refer to the
computer to check for emag status instead.
fix: Programs no longer download twice.
del: Removes the Chemistry computer disk as it was empty due to
chemistry app's removal
/🆑

---------

Co-authored-by: san7890 <the@ san7890.com>

* Reworked PDA menu & NtOS themes

---------

Co-authored-by: John Willard <53777086+JohnFulpWillard@users.noreply.github.com>
Co-authored-by: san7890 <the@ san7890.com>
2023-02-17 00:35:34 -08:00
SkyratBot 2b800b9a23 [MIRROR] Removes tablets (not PDAs) entirely. [MDB IGNORE] (#17880)
* Removes tablets (not PDAs) entirely.

* contractor changes

* map changes

* Update assistant.dm

* conflicts

Co-authored-by: John Willard <53777086+JohnFulpWillard@users.noreply.github.com>
Co-authored-by: Zonespace <41448081+Zonespace27@users.noreply.github.com>
Co-authored-by: Tom <8881105+tf-4@users.noreply.github.com>
2022-12-07 01:07:02 +00:00
SkyratBot c023767b25 [MIRROR] Misc PDA code improvements [MDB IGNORE] (#17026)
* Misc PDA code improvements (#70555)

* How to conflict with PRs: A guide

* Removes unnecessary support for the now-removed job disks from Tablet's TGUI menu, and tablet's ui_act.
* Adds autodoc comments to computer files
* Removes the unused 'unsendable' var on computer files
* Generally improves code on tablets, now process isn't looping through every idle thread twice!
* Moves the check for program in idle_threads above checking if supported by hardware, because it's already running, so there's no need to check.

* eh

* revert a scipaper change

* Misc PDA code improvements

* updated contract_uplink

Co-authored-by: John Willard <53777086+JohnFulpWillard@users.noreply.github.com>
Co-authored-by: Tastyfish <crazychris32@gmail.com>
2022-10-20 15:22:45 -04:00
SkyratBot 0339798a42 [MIRROR] Removes network cards and printers from tablets [MDB IGNORE] (#16451)
* Removes network cards and printers from tablets

* merge tablet_presets

* printer.dm should have been deleted, missed change

* update contractor tablet

Co-authored-by: John Willard <53777086+JohnFulpWillard@users.noreply.github.com>
Co-authored-by: tastyfish <crazychris32@gmail.com>
2022-09-27 23:16:32 -04:00
SkyratBot 2059781c34 [MIRROR] PDAs open their messenger when replying to messages through chat [MDB IGNORE] (#15022)
* PDAs open their messenger when replying to messages through chat

* Update code/modules/modular_computers/hardware/hard_drive.dm

* Actually fixes the merge conflict and the compile errors

Co-authored-by: distributivgesetz <distributivgesetz93@gmail.com>
Co-authored-by: Tom <8881105+tf-4@users.noreply.github.com>
Co-authored-by: GoldenAlpharex <58045821+GoldenAlpharex@users.noreply.github.com>
Co-authored-by: GoldenAlpharex <jerego1234@hotmail.com>
2022-07-19 02:14:05 +01:00
SkyratBot 6f1ab2f231 [MIRROR] Ordnance Content Update: Scientific Papers [MDB IGNORE] (#11862)
* Ordnance Content Update: Scientific Papers

* Feex

* Updated our modular maps to not be missing equipment

* I also forgot to fix that in another PR, I'm too lazy to open a new one to fix it

* Yikes

* I forgot Journey

Co-authored-by: vincentiusvin <54709710+vincentiusvin@users.noreply.github.com>
Co-authored-by: GoldenAlpharex <58045821+GoldenAlpharex@users.noreply.github.com>
Co-authored-by: GoldenAlpharex <jerego1234@hotmail.com>
2022-03-07 17:59:39 -05:00
SkyratBot 2508c3c818 [MIRROR] The Science Hub app for research is now available for science employees in addition to heads of staff. [MDB IGNORE] (#11912)
* The Science Hub app for research is now available for science employees in addition to heads of staff. (#65035)

* The Science Hub app for research is now available for science employees in addition to heads of staff.

Co-authored-by: zxaber <37497534+zxaber@users.noreply.github.com>
2022-03-06 11:38:45 -05:00
SkyratBot 65b8082678 [MIRROR] Harddel Fix Pack #42 + Better Live Reftracking Support [MDB IGNORE] (#10639)
* Harddel Fix Pack #42 + Better Live Reftracking Support

* awooga

Co-authored-by: LemonInTheDark <58055496+LemonInTheDark@users.noreply.github.com>
Co-authored-by: Gandalf <9026500+Gandalf2k15@users.noreply.github.com>
2022-01-12 21:57:49 +00:00
SkyratBot b7b6bd501f [MIRROR] removes double spaces AFTER symbols [MDB IGNORE] (#9226)
* removes double spaces AFTER symbols

* Fixing conflicts

Co-authored-by: John Willard <53777086+JohnFulpWillard@users.noreply.github.com>
Co-authored-by: GoldenAlpharex <jerego1234@hotmail.com>
2021-11-05 18:15:12 -04:00
SkyratBot f49861e646 [MIRROR] Allows emagged and syndicate borgs to self-detonate [MDB IGNORE] (#8654)
* Allows emagged and syndicate borgs to self-detonate (#61915)

Once upon a time, when borgs could access machines from any distance once the window was open, borgs could self-detonate as a combat strategy. At some point, machine access for borgs was confined to being nearby the device, which removed self-detonation (except when near the console) as a side effect. This PR re-adds the ability for emagged and syndicate borgs by placing a confirm-type button into their RoboTact app (Actions section, under the Status tab).

Stunned or locked borgs cannot self-destruct.

Additionally, logging for borg detonations has been moved out of the robot console and into the borg self_destruct() proc, to avoid duplicate code, and emagged borgs now have their tablet theme and icon changed to syndicate versions.

* Allows emagged and syndicate borgs to self-detonate

Co-authored-by: zxaber <37497534+zxaber@users.noreply.github.com>
2021-10-08 15:33:12 +01:00
SkyratBot 7d1d0e1fad [MIRROR] Refactors most spans into span procs (#6315)
* Refactors most spans into span procs

* AA

* a

* AAAAAAAAAAAAAAAAAAAAAA

* Update species.dm

Co-authored-by: Watermelon914 <37270891+Watermelon914@users.noreply.github.com>
Co-authored-by: Gandalf <jzo123@hotmail.com>
2021-06-16 00:24:49 +01:00
SkyratBot de89c62c63 [MIRROR] NTDownloader UI revamp (#3246)
* NTDownloader UI revamp (#56704)

Revamp of the software downloader program for modular computers.

Changes:

- Programs are now sorted alphabetically with incompatible ones in the end of the list.
- Installed programs are now displayed in the list.
- Added program icons.
- Moved the error messages in place of the download button.
- Only the most important error message is displayed now. Priority: compatibility, access, free space.
- Syndicate programs are now displayed in the same list, but have a warning message from NT (There are no warning messages on syndicate OS).
- Added program categories to improve navigation. The default option "All" contains items from all categories.
- Download progress bar moved in place of the Disk usage bar. Disk usage is updated only after the download is complete, so the information was inaccurate during download. And the download bar now always visible regardless of selected category.
- The old download progress bar (next to the corresponding program) is replaced with "Downloading" indicator with a spinner.

Co-authored-by: Aleksej Komarov <stylemistake@ gmail.com>

* NTDownloader UI revamp

Co-authored-by: Andrew <mt.forspam@gmail.com>
Co-authored-by: Aleksej Komarov <stylemistake@ gmail.com>
2021-02-10 00:41:48 +00:00
SkyratBot 25df6e7da3 Cleaning up robot code: modules renamed to models & DOGBORG REWORK (#2837)
* Cleaning up robot code: modules renamed to models

* Merge branch 'master' into upstream-merge-56312

* [PR Fix] Modular_Skyrat borgos (#3019)

* No more linter complaining

* Halfway (or full way, I don't know) through moving stuff around

* Caps!

* a

Co-authored-by: dragomagol <66640614+dragomagol@users.noreply.github.com>
Co-authored-by: Gandalf2k15 <jzo123@hotmail.com>
Co-authored-by: Funce <funce.973@gmail.com>
2021-02-05 21:28:06 +00:00
SkyratBot c487c73f39 [MIRROR] Grep for space indentation (#1969)
* Grep for space indentation

* aa

* Update species.dm

* Update species.dm

* Update maps.dm

* Update examine.dm

Co-authored-by: TiviPlus <57223640+TiviPlus@users.noreply.github.com>
Co-authored-by: Azarak <azarak10@gmail.com>
2020-12-01 12:26:41 +01:00
SkyratBot 12eb577667 [MIRROR] Fixes the borg tablet being unusable without power, and borgs usually being unable to print pictures (#1288)
* Fixes some borg tablet bugs (#54339)

fix: Borg tablets now correctly work when the borg is out of power (though you'll get no networking until you get that power issue sorted out).
fix: Borgs that are synced to AIs can correctly view and print photos once more.

* Fixes the borg tablet being unusable without power, and borgs usually being unable to print pictures

Co-authored-by: zxaber <37497534+zxaber@users.noreply.github.com>
2020-10-13 23:03:24 +02:00
SkyratBot f8ce14a9a6 [MIRROR] Makes Modular PC icons not hardcoded in NtosMain.js, and fixes them not showing up (#1151)
* Unhardcodes Modular PC icons (#54158)

* Changes modPC program icons to not be hardcoded

* icons

* tgui.bundle.js, we meet again

* Makes Modular PC icons not hardcoded in NtosMain.js, and fixes them not showing up

Co-authored-by: zxaber <37497534+zxaber@users.noreply.github.com>
2020-10-04 15:25:44 +02:00
SkyratBot fd11d35489 [MIRROR] Adds borg tablets, and RoboTact as a borg self-management app (#959)
* tgui: Borg tablets and RoboTact as a borg self-management app (#53373)

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* take one

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* part 2

* Automatic changelog compile [ci skip]

* part 3

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* part three I think

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* who even knows what step I'm on anymore

* and another one

* Automatic changelog compile [ci skip]

* PR time

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Automatic changelog compile [ci skip]

* Forward Progress

* Automatic changelog compile [ci skip]

* Merge remote-tracking branch 'upstream/master' into SiliScreen

* more foward progress

* RoboTact

* bad tab

* Improvements all around

Plus some changes to vis_overlay to allow for color

* Lights and things

* borg network card

borg tablets lose networking when borg is locked or has no power

* hud changes

not done yet, but getting close

* better modPC screen button

* updoot

* more useful colors

* linter

* Do I finally get a green ✓

* better law sync catching

* hate linters

Co-authored-by: Changelogs <action@ github.com>

* Adds borg tablets, and RoboTact as a borg self-management app

Co-authored-by: zxaber <37497534+zxaber@users.noreply.github.com>
Co-authored-by: Changelogs <action@ github.com>
2020-09-24 20:29:31 +02:00