// APC electronics status:
/// There are no electronics in the APC.
#define APC_ELECTRONICS_MISSING 0
/// The electronics are installed but not secured.
#define APC_ELECTRONICS_INSTALLED 1
/// The electronics are installed and secured.
#define APC_ELECTRONICS_SECURED 2

// APC cover status:
/// The APCs cover is closed.
#define APC_COVER_CLOSED 0
/// The APCs cover is open.
#define APC_COVER_OPENED 1
/// The APCs cover is missing.
#define APC_COVER_REMOVED 2

// APC visuals
/// Pixel offset of the APC from the floor turf
#define APC_PIXEL_OFFSET 25

// APC charging status:
/// The APC is not charging.
#define APC_NOT_CHARGING 0
/// The APC is charging.
#define APC_CHARGING 1
/// The APC is fully charged.
#define APC_FULLY_CHARGED 2

// APC channel status:
/// The APCs power channel is manually set off.
#define APC_CHANNEL_OFF 0
/// The APCs power channel is automatically off.
#define APC_CHANNEL_AUTO_OFF 1
/// The APCs power channel is manually set on.
#define APC_CHANNEL_ON 2
/// The APCs power channel is automatically on.
#define APC_CHANNEL_AUTO_ON 3

#define APC_CHANNEL_IS_ON(channel) (channel >= APC_CHANNEL_ON)

// APC autoset enums:
/// The APC turns automated and manual power channels off.
#define AUTOSET_FORCE_OFF 0
/// The APC turns automated power channels off.
#define AUTOSET_OFF 2
/// The APC turns automated power channels on.
#define AUTOSET_ON 1

// External power status:
/// The APC either isn't attached to a powernet or there is no power on the external powernet.
#define APC_NO_POWER 0
/// The APCs external powernet does not have enough power to charge the APC.
#define APC_LOW_POWER 1
/// The APCs external powernet has enough power to charge the APC.
#define APC_HAS_POWER 2

// Wires & EMPs:
/// The wire value used to reset the APCs wires after one's EMPed.
#define APC_RESET_EMP "emp"

// update_state
// Bitshifts: (If you change the status values to be something other than an int or able to exceed 3 you will need to change these too)
/// The bit shift for the APCs cover status.
#define UPSTATE_COVER_SHIFT (0)
	/// The bitflag representing the APCs cover being open for icon purposes.
	#define UPSTATE_OPENED1 (APC_COVER_OPENED << UPSTATE_COVER_SHIFT)
	/// The bitflag representing the APCs cover being missing for icon purposes.
	#define UPSTATE_OPENED2 (APC_COVER_REMOVED << UPSTATE_COVER_SHIFT)

// Bitflags:
/// The APC has a power cell.
#define UPSTATE_CELL_IN (1<<2)
/// The APC is broken or damaged.
#define UPSTATE_BROKE (1<<3)
/// The APC is undergoing maintenance.
#define UPSTATE_MAINT (1<<4)
/// The APCs wires are exposed.
#define UPSTATE_WIREEXP (1<<5)

// update_overlay
// Bitflags:
/// Bitflag indicating that the APCs operating status overlay should be shown.
#define UPOVERLAY_OPERATING (1<<0)
/// Bitflag indicating that the APCs locked status overlay should be shown.
#define UPOVERLAY_LOCKED (1<<1)

// Bitshifts: (If you change the status values to be something other than an int or able to exceed 3 you will need to change these too)
/// Bit shift for the charging status of the APC.
#define UPOVERLAY_CHARGING_SHIFT (2)
/// Bit shift for the equipment status of the APC.
#define UPOVERLAY_EQUIPMENT_SHIFT (4)
/// Bit shift for the lighting channel status of the APC.
#define UPOVERLAY_LIGHTING_SHIFT (6)
/// Bit shift for the environment channel status of the APC.
#define UPOVERLAY_ENVIRON_SHIFT (8)

#define APC_AI_NO_MALF 0
#define APC_AI_NO_HACK 1
#define APC_AI_HACK_NO_SHUNT 2
#define APC_AI_HACK_SHUNT_HERE 3
#define APC_AI_HACK_SHUNT_ANOTHER 4