## About The Pull Request
Tanks while used as internals gives a progress bar to show how full they
are, starting from the pressure when first starting to get used, when we
expect the player to know how much is in the tank, and ticking down as
it gets used. Alternative to this could be using the initial pressure,
but then it would remain at 100% for quite a while when you put more
than it starts off with.
This replaces the stat panel entry for them, this is a part of
https://hackmd.io/443_dE5lRWeEAp9bjGcKYw
## Why It's Good For The Game
Adds a visual indicator to tell people how much air they've used since
toggling the tank's internals which is much better than the previous'
random numbers in stat panel.
## Changelog
🆑
qol: internal tanks gives a progress bar when you toggle them, allowing
you to see how much you've consumed so far.
/🆑
## About The Pull Request
516 requires float layered overlays to be using pixel_w and pixel_z
instead of pixel_x and pixel_y respectively, unless we want
visual/layering errors. This makes sense, as w,z are for visual effects
only. Sadly seems we were not entirely consistent in this, and many
things seem to have been using x,y incorrectly.
This hopefully fixes that, and thus also fixes layering issues. Complete
1:1 compatibility not guaranteed.
I did the lazy way suggested to me by SmArtKar to speed it up (Runtiming
inside apply_overlays), and this is still included in the PR to flash
out possible issues in a TM (Plus I will need someone to grep the
runtimes for me after the TM period to make sure nothing was missed).
After this is done I'll remove all these extra checks.
Lints will probably be failing for a bit, got to wait for [this
update](https://github.com/SpaceManiac/SpacemanDMM/commit/4b77cd487d0a7b6a069df20356b701af5b20489d)
to them to make it into release. Or just unlint the lines, though that's
probably gonna produce code debt
## Why It's Good For The Game
Fixes this massive 516 mess, hopefully.
closes#90281
## Changelog
🆑
refactor: Changed many of our use cases for pixel_x and pixel_y
correctly into pixel_w and pixel_z, fixing layering issues in the
process.
/🆑
---------
Co-authored-by: SmArtKar <44720187+SmArtKar@users.noreply.github.com>
Co-authored-by: SmArtKar <master.of.bagets@gmail.com>
## About The Pull Request
All usages of world.icon_size in code have been replaced with new
`ICONSIZE_X`, `ICONSIZE_Y` and `ICONSIZE_ALL` defines depending on
context
Replaces some "32" magic numbers with the defines
A few bits of code have been modified to split up x/y math as well
## Why It's Good For The Game
Magic number bad, code more readable, code more flexible and I'm told
there's an access cost to doing world.icon_size so minor performance
gains
## Changelog
🆑 tonty
code: made some code relating to the world's icon size more readable
/🆑
---------
Co-authored-by: Ghom <42542238+Ghommie@users.noreply.github.com>
## About The Pull Request
What it says on the tin. These are getting qdeleted A LOT...
LemonInTheDark we don't need to be doing this I don't think?
## Why It's Good For The Game
Saves a bit on overhead of a very commonly qdeleted item that doesn't
need to be.
## Changelog
🆑
code: progressbars no longer qdel their /image
/🆑
## About The Pull Request
Do_after bars always draw based on the top-left corner of the targetted
atom, for atoms with sprites that are larger than 32x32 this gives them
a weird offset instead of being centred, which bugs me.
I have tried my best to figure out a way to reverse this which does not
interfere with atoms which use pixel_x/pixel_y to visually appear to be
on a different tile.
## Why It's Good For The Game
Before:
he hates how you missed him completely 😦
After:
now you're cleaning his feet 🙂
## Changelog
🆑
image: progress bars and cleaning particles are now centered on the tile
occupied by the target, if it is a big sprite
/🆑
## About The Pull Request
In addition, improves dump_harddel_deets usage to hopefully hit in unit
testing
byond_status() will dump as a part of find_references(). While I'd like
to expand that if we ever get a proper version, this is good for how we
have things setup rn.
## About The Pull Request
I'm sick of the progress bar harddel, and I've ran into this problem in
the past, so I'm just gonna do something about it
If you want to provide an individual logged bit of info about a harddel,
you can override `/datum/proc/dump_harddel_info()` and return a string
containing "whatever"
Use of this should be limited, this could potentially clutter del logs,
especially if it's used on something that fails often, like pipes
I do think it's still useful tho. It's output ingame, in the logs, and
in unit test failures. Hopefully all nicely tho I'm only really 100%
sure about in game.
## About The Pull Request
I gotta wonder how long it's been like that.
## Why It's Good For The Game
Fixes#77295
## Changelog
🆑 Vekter
spellcheck: Fixed a typo in progressbar.dm and the file name for the
progress bar sprites.
/🆑
Makes the code compatible with 515.1594+
Few simple changes and one very painful one.
Let's start with the easy:
* puts call behind `LIBCALL` define, so call_ext is properly used in 515
* Adds `NAMEOF_STATIC(_,X)` macro for nameof in static definitions since
src is now invalid there.
* Fixes tgui and devserver. From 515 onward the tmp3333{procid} cache
directory is not appened to base path in browser controls so we don't
check for it in base js and put the dev server dummy window file in
actual directory not the byond root.
* Renames the few things that had /final/ in typepath to ultimate since
final is a new keyword
And the very painful change:
`.proc/whatever` format is no longer valid, so we're replacing it with
new nameof() function. All this wrapped in three new macros.
`PROC_REF(X)`,`TYPE_PROC_REF(TYPE,X)`,`GLOBAL_PROC_REF(X)`. Global is
not actually necessary but if we get nameof that does not allow globals
it would be nice validation.
This is pretty unwieldy but there's no real alternative.
If you notice anything weird in the commits let me know because majority
was done with regex replace.
@tgstation/commit-access Since the .proc/stuff is pretty big change.
Co-authored-by: san7890 <the@san7890.com>
Co-authored-by: Mothblocks <35135081+Mothblocks@users.noreply.github.com>
About The Pull Request
I've reworked multiz. This was done because our current implementation of multiz flattens planes down into just the openspace plane. This breaks any effects we attach to plane masters (including lighting), but it also totally kills the SIDE_MAP map format, which we NEED for wallening (A major 3/4ths resprite of all wall and wall adjacent things, making them more then one tile high. Without sidemap we would be unable to display things both in from of and behind objects on map. Stupid.)
This required MASSIVE changes. Both to all uses of the plane var for reasons I'll discuss later, and to a ton of different systems that interact with rendering.
I'll do my best to keep this compact, but there's only so much I can do. Sorry brother.
Core idea
OK: first thing.
vis_contents as it works now squishes the planes of everything inside it down into the plane of the vis_loc.
This is bad. But how to do better?
It's trivially easy to make copies of our existing plane masters but offset, and relay them to the bottom of the plane above. Not a problem. The issue is how to get the actual atoms on the map to "land" on them properly.
We could use FLOAT_PLANE to offset planes based off how they're being seen, in theory this would allow us to create lens for how objects are viewed.
But that's not a stable thing to do, because properly "landing" a plane on a desired plane master would require taking into account every bit of how it's being seen, would inherently break this effect.
Ok so we need to manually edit planes based off "z layer" (IE: what layer of a z stack are you on).
That's the key conceit of this pr. Implementing the plane cube, and ensuring planes are always offset properly.
Everything else is just gravy.
About the Plane Cube
Each plane master (except ones that opt out) is copied down by some constant value equal to the max absolute change between the first and the last plane.
We do this based off the max z stack size detected by SSmapping. This is also where updates come from, and where all our updating logic will live.
As mentioned, plane masters can choose to opt out of being mirrored down. In this case, anything that interacts with them assuming that they'll be offset will instead just get back the valid plane value. This works for render targets too, since I had to work them into the system as well.
Plane masters can also be temporarily hidden from the client's screen. This is done as an attempt at optimization, and applies to anything used in niche cases, or planes only used if there's a z layer below you.
About Plane Master Groups
BYOND supports having different "maps" on screen at once (IE: groups of items/turfs/etc)
Plane masters cannot cover 2 maps at once, since their location is determined by their screen_loc.
So we need to maintain a mirror of each plane for every map we have open.
This was quite messy, so I've refactored it (and maps too) to be a bit more modular.
Rather then storing a list of plane masters, we store a list of plane master group datums.
Each datum is in charge of the plane masters for its particular map, both creating them, and managing them.
Like I mentioned, I also refactored map views. Adding a new mapview is now as simple as newing a /atom/movable/screen/map_view, calling generate_view with the appropriate map id, setting things you want to display in its vis_contents, and then calling display_to on it, passing in the mob to show ourselves to.
Much better then the hardcoded pattern we used to use. So much duplicated code man.
Oh and plane master controllers, that system we have that allows for applying filters to sets of plane masters? I've made it use lookups on plane master groups now, rather then hanging references to all impacted planes. This makes logic easier, and prevents the need to manage references and update the controllers.
image
In addition, I've added a debug ui for plane masters.
It allows you to view all of your own plane masters and short descriptions of what they do, alongside tools for editing them and their relays.
It ALSO supports editing someone elses plane masters, AND it supports (in a very fragile and incomplete manner) viewing literally through someone else's eyes, including their plane masters. This is very useful, because it means you can debug "hey my X is yorked" issues yourself, on live.
In order to accomplish this I have needed to add setters for an ungodly amount of visual impacting vars. Sight flags, eye, see_invis, see_in_dark, etc.
It also comes with an info dump about the ui, and plane masters/relays in general.
Sort of on that note. I've documented everything I know that's niche/useful about our visual effects and rendering system. My hope is this will serve to bring people up to speed on what can be done more quickly, alongside making my sin here less horrible.
See https://github.com/LemonInTheDark/tgstation/blob/multiz-hell/.github/guides/VISUALS.md.
"Landing" planes
Ok so I've explained the backend, but how do we actually land planes properly?
Most of the time this is really simple. When a plane var is set, we need to provide some spokesperson for the appearance's z level. We can use this to derive their z layer, and thus what offset to use.
This is just a lot of gruntwork, but it's occasionally more complex.
Sometimes we need to cache a list of z layer -> effect, and then use that.
Also a LOT of updating on z move. So much z move shit.
Oh. and in order to make byond darkness work properly, I needed to add SEE_BLACKNESS to all sight flags.
This draws darkness to plane 0, which means I'm able to relay it around and draw it on different z layers as is possible. fun darkness ripple effects incoming someday
I also need to update mob overlays on move.
I do this by realiizing their appearances, mutating their plane, and then readding the overlay in the correct order.
The cost of this is currently 3N. I'm convinced this could be improved, but I've not got to it yet.
It can also occasionally cause overlays to corrupt. This is fixed by laying a protective ward of overlays.Copy in the sand, but that spell makes the compiler confused, so I'll have to bully lummy about fixing it at some point.
Behavior changes
We've had to give up on the already broken gateway "see through" effect. Won't work without managing gateway plane masters or something stupid. Not worth it.
So instead we display the other side as a ui element. It's worse, but not that bad.
Because vis_contents no longer flattens planes (most of the time), some uses of it now have interesting behavior.
The main thing that comes to mind is alert popups that display mobs. They can impact the lighting plane.
I don't really care, but it should be fixable, I think, given elbow grease.
Ah and I've cleaned up layers and plane defines to make them a bit easier to read/reason about, at least I think.
Why It's Good For The Game
<visual candy>
Fixes#65800Fixes#68461
Changelog
cl
refactor: Refactored... well a lot really. Map views, anything to do with planes, multiz, a shit ton of rendering stuff. Basically if you see anything off visually report it
admin: VV a mob, and hit View/Edit Planes in the dropdown to steal their view, and modify it as you like. You can do the same to yourself using the Edit/Debug Planes verb
/cl
## About The Pull Request
Changes up some layer and plane defines for no particular reason lol
## Why It's Good For The Game
Planes actually override layers, and layers control ordering within planes. A lot of the usage of plane and layer was wholly unnecessary. This refactor helps future maintainability while also being needed staging for _future features._
Adds SIGNAL_HANDLER, a macro that sets SHOULD_NOT_SLEEP(TRUE). This should ideally be required on all new signal callbacks.
Adds BLOCKING_SIGNAL_HANDLER, a macro that does nothing except symbolize "this is an older signal that didn't necessitate a code rewrite". It should not be allowed for new work.
This comes from discussion around #52735, which yields by calling input, and (though it sets the return type beforehand) will not properly return the flag to prevent attack from slapping.
To fix 60% of the yielding cases, WrapAdminProcCall no longer waits for another admin's proc call to finish. I'm not an admin, so I don't know how many behinds this has saved, but if this is problematic for admins I can just make it so that it lets you do it anyway. I'm not sure what the point of this babysitting was anyway.
Requested by @optimumtact.
Changelog
cl
admin: Calling a proc while another admin is calling one will no longer wait for the first to finish. You will simply just have to call it again.
/cl
* progress bar anims
* gold final stage
* technical improvements
* special failure animation + code improvement
* mm grayons
* better animation
* less magic number + garbage collection safety tweak
* I forgot to actually include the garbage collection tweak
* even more garbage collection safety
* Revert "all this wrapping and it's not even christmas (#33035)"
This reverts commit faaf151580.
* Revert "fuck me for forgetting to graph this one"
This reverts commit 45d7acea2f.
* Revert "defines math"
This reverts commit 2817a1737b.
John Willard