## About The Pull Request
Quite simple - this changes every direct mention of a mob in a
`notify_ghosts` message to use `[mob.real_name]` instead of just `[mob]`
## Why It's Good For The Game
makes things less confusing - ghosts can see easily their actual
identity anyways, so it's not like there's much of a reason _not_ to do
this.
## Changelog
🆑
qol: Ghost notifications will now use the real names of mobs when
something happens (i.e no more "Unknown has completed an ascension
ritual!")
/🆑
## About The Pull Request
Was just scrolling through the Paradise github since they seem to have
more work done for 516 to see if there's anything I can port over, found
this and thought why not.
Ports parts of https://github.com/ParadiseSS13/Paradise/pull/25105
Specifically, updaing all hrefs to use the internal ``byond://``, and
adding it to grep.
## Why It's Good For The Game
More work towards 516.
## Changelog
Nothing player-facing.
## About The Pull Request
Fixes#85779,
Fixes#86041
APCs use batteries instead of cells now, and overload and power sink APC
drain were made to scale off of cell capacity instead of battery
capacity. Power sinks were not adjusted at all to match the new power
changes.
## Why It's Good For The Game
## Changelog
🆑
fix: Fixed light overloads not draining significant amounts of energy.
fix: Power sinks now drain APCs at a significant rate instead of
glacially slow.
balance: Power sinks are adjusted to not explode within 30 seconds of
the average power output a station produces.
/🆑
## About The Pull Request
This re writes most cell power usage cases with 2 defines
`STANDARD_CELL_CHARGE`(Joules) & `STANDARD_CELL_RATE`(Watts) so changing
cell capacity values in the future won't cause discrepancies.
## Changelog
🆑
code: most cell power usages are scaled with defined constants to help
adapt to future changes
/🆑
## About The Pull Request
Removes all arbitrary energy and power units in the codebase. Everything
is replaced with the joule and watt, with 1 = 1 joule, or 1 watt if you
are going to multiply by time. This is a visible change, where all
arbitrary energy units you see in the game will get proper prefixed
units of energy.
With power cells being converted to the joule, charging one joule of a
power cell will require one joule of energy.
The grid will now store energy, instead of power. When an energy usage
is described as using the watt, a power to energy conversion based on
the relevant subsystem's timing (usually multiplying by seconds_per_tick
or applying power_to_energy()) is needed before adding or removing from
the grid. Power usages that are described as the watt is really anything
you would scale by time before applying the load. If it's described as a
joule, no time conversion is needed. Players will still read the grid as
power, having no visible change.
Machines that dynamically use power with the use_power() proc will
directly drain from the grid (and apc cell if there isn't enough)
instead of just tallying it up on the dynamic power usages for the area.
This should be more robust at conserving energy as the surplus is
updated on the go, preventing charging cells from nothing.
APCs no longer consume power for the dynamic power usage channels. APCs
will consume power for static power usages. Because static power usages
are added up without checking surplus, static power consumption will be
applied before any machine processes. This will give a more truthful
surplus for dynamic power consumers.
APCs will display how much power it is using for charging the cell. APC
cell charging applies power in its own channel, which gets added up to
the total. This will prevent invisible power usage you see when looking
at the power monitoring console.
After testing in MetaStation, I found roundstart power consumption to be
around 406kW after all APCs get fully charged. During the roundstart APC
charge rush, the power consumption can get as high as over 2MW (up to
25kW per roundstart APC charging) as long as there's that much
available.
Because of the absurd potential power consumption of charging APCs near
roundstart, I have changed how APCs decide to charge. APCs will now
charge only after all other machines have processed in the machines
processing subsystem. This will make sure APC charging won't disrupt
machines taking from the grid, and should stop APCs getting their power
drained due to others demanding too much power while charging. I have
removed the delays for APC charging too, so they start charging
immediately whenever there's excess power. It also stops them turning
red when a small amount of cell gets drained (airlocks opening and shit
during APC charge rush), as they immediately become fully charged
(unless too much energy got drained somehow) before changing icon.
Engineering SMES now start at 100% charge instead of 75%. I noticed
cells were draining earlier than usual after these changes, so I am
making them start maxed to try and combat that.
These changes will fix all conservation of energy issues relating to
charging powercells.
## Why It's Good For The Game
Closes#73438Closes#75789Closes#80634Closes#82031
Makes it much easier to interface with the power system in the codebase.
It's more intuitive. Removes a bunch of conservation of energy issues,
making energy and power much more meaningful. It will help the
simulation remain immersive as players won't encounter energy
duplication so easily. Arbitrary energy units getting replaced with the
joule will also tell people more meaningful information when reading it.
APC charging will feel more snappy.
## Changelog
🆑
fix: Fixes conservation of energy issues relating to charging
powercells.
qol: APCs will display how much power they are using to charge their
cell. This is accounted for in the power monitoring console.
qol: All arbitrary power cell energy units you see are replaced with
prefixed joules.
balance: As a consequence of the conservation of energy issues getting
fixed, the power consumption for charging cells is now very significant.
balance: APCs only use surplus power from the grid after every machine
processes when charging, preventing APCs from causing others to
discharge while charging.
balance: Engineering SMES start at max charge to combat the increased
energy loss due to conservation of energy fixes.
/🆑
---------
Co-authored-by: SyncIt21 <110812394+SyncIt21@users.noreply.github.com>
Co-authored-by: Ghom <42542238+Ghommie@users.noreply.github.com>
## About The Pull Request
I woke up today and thought 'what would be easy thing to do today so I
can say I've done something?'. Then I remembered I saw several gangtool
usages the time I split radio up, and I could remedy those. 7 hours
later, device.dmi is split in a folder of its own, and I've also given
unique sprites to door remotes and landing desginators.
## Why It's Good For The Game
The device.dmi was kind of a mess.
## Changelog
🆑
/🆑
## About The Pull Request
Code to handle this flag only ever existed on the `/obj` sublevel, so
there's no need for it to be on the `/atom` level `flags_1`. There was
probably a point in time in which mobs or turfs conducted electricity
but there's zero code for it anymore so we truly just live in a society
now.
## Why It's Good For The Game
Frees up a slot on `flags_1` (which is really nice actually), proper
scoping of certain bitflag stuff, etc.
## Changelog
Not relevant to players.
I may have screwed something up, will be doing a few passes on this
myself to ensure all the search and replaces went alright but we should
be good™️
## About The Pull Request
This helps clean up my favorite helper proc in the whole codebase,
`notify_ghosts()`.
The notify_suiciders, ignore_mapload, and flashwindow args are GONE.
They have been replaced with the notify_flags bitflag argument. This was
intended to make deadchat announcements a bitflag argument too, but
those got reverted right before I originally wanted to submit this PR.
The on-screen popup now shows the notification body when you hover it
with your mouse again. The format is now `[notify_ghosts message] --
[click action (orbit/jump/play)]`
Every single `notify_ghosts()` call has been changed to multiline format
and has been given trailing commas. Pretty!
## Why It's Good For The Game
Cleans up a proc that is very popular and going through a lot of changes
at the time.
Allows for further flexibility when this proc inevitably gets tweaked or
improved. 12 -> 10 args is an improvement, and it doesn't impact the
helper's flexibility at all.
## Changelog
🆑 Rhials
code: The notify_ghosts proc has been cleaned up. Please report any
abnormal changes in deadchat notification behavior.
qol: The on-screen deadchat popups now contain the notification blurb
when hovered with your mouse again.
/🆑
## About The Pull Request
Adds announce_to_ghosts()/notify_ghosts() calls to a bunch of different
things.
**THIS INCLUDES:**
- Powersink being activated/reaching critical (explosion) heat capacity.
- His Grace being awoken.
- Hot Potatoes being armed.
- Ascension Rituals being completed.
- Eyesnatcher victims.
- Ovens exploding as a result of the Aurora Caelus event.
- Wizard Imposter spawns.
- Rock-Paper-Scissors with death as the result of Helbital consumption.
- BSA impact sites.
- Spontaneous Appendicitis.
- The purchasing of a badass syndie balloon.
- The Supermatter beginning to delaminate.
This was everything that I could think of that would be worth announcing
to deadchat. These were all chosen with consideration to questions like
"how easy would it be to spam deadchat with this?" and "will observers
actually see the interesting thing happen, or just the aftermath?".
Not gonna lie, I've really become an observer main as of recently. Maybe
that's being reflected in my recent PRs. Who's to say? Deadchat
Announcement Variety Pack 2 will probably never come out. Sorry.
## Why It's Good For The Game
Gives deadchat a better indiciation of when/where something **REALLY
FUNNY** is about to happen. Draws attention to certain things that are
likely to gather an audience anyways, but sooner (for your viewing
pleasure). In simple terms, it helps the observers observe things
better.
Some cases, such as the aurora caelus or helbitaljanken, are occurrences
so rare that they deserve the audience.
## Changelog
🆑 Rhials
qol: Observers now recieve an alert when a powersink is activated/about
to explode.
qol: His Grace being awoken now alerts observers, to give you a
headstart on your murderbone ghost ring.
qol: Ascension Rituals being completed will also alert observers, for
basically the same reason.
qol: Arming a hot potato will now alert observers. Catch!
qol: Eyesnatcher victims will now notify observers, and invite them to
laugh at their state of misery and impotence.
qol: Observers will be notified of any acute references to The Simpsons
or other 20th Television America copyright properties.
qol: Wizard Imposter spawns alert observers, much like any other ghost
role event should.
qol: Playing Rock-Paper-Scissors with death will now alert the observers
and invite them to watch. Better not choke!
qol: Observers now get an orbit link for BSA impact sites. Why does it
keep teleporting me to the AI upload??
qol: Spontaneous Appendicitis now alerts deadchat.
qol: The purchasing of a badass syndie balloon now alerts deadchat. You
might not be any more powerful, but at least you have an audience.
qol: When beginning to delaminate, the Supermatter will alert observers
and invite them to watch the fireworks.
/🆑
## About The Pull Request
This fixes the powersink always showing as being "very hot" under
certain conditions, since there was a missing set of parenthesis in the
observer/distance check.
## Why It's Good For The Game
Fixes a bug I found while making a QOL change that ended up being kind
of pointless.
## Changelog
🆑 Rhials
fix: Powersinks no longer always show as being very hot if you're too
close.
/🆑
Ladies, Gentlemen, Gamers. You're probably wondering why I've called you
all here (through the automatic reviewer request system). So, mineral
balance! Mineral balance is less a balance and more of a nervous white
dude juggling spinning plates on a high-wire on his first day. The fact
it hasn't failed after going on this long is a miracle in and of itself.
This PR does not change mineral balance. What this does is moves over
every individual cost, both in crafting recipes attached to an object
over to a define based system. We have 3 defines:
`sheet_material_amount=2000` . Stock standard mineral sheet. This being
our central mineral unit, this is used for all costs 2000+.
`half_sheet_material_amount=1000` . Same as above, but using iron rods
as our inbetween for costs of 1000-1999.
`small_material_amount=100` . This hits 1-999. This covers... a
startlingly large amount of the codebase. It's feast or famine out here
in terms of mineral costs as a result, items are either sheets upon
sheets, or some fraction of small mats.
Shout out to riot darts for being the worst material cost in the game. I
will not elaborate.
Regardless, this has no functional change, but it sets the groundwork
for making future changes to material costs much, MUCH easier, and moves
over to a single, standardized set of units to help enforce coding
standards on new items, and will bring up lots of uncomfortable balance
questions down the line.
For now though, this serves as some rough boundaries on how items costs
are related, and will make adjusting these values easier going forward.
Except for foam darts.
I did round up foam darts.
Adjusting mineral balance on the macro scale will be as simple as
changing the aforementioned mineral defines, where the alternative is a
rats nest of magic number defines. ~~No seriously, 11.25 iron for a foam
dart are you kidding me what is the POINT WHY NOT JUST MAKE IT 11~~
Items individual numbers have not been adjusted yet, but we can
standardize how the conversation can be held and actually GET SOMEWHERE
on material balance as opposed to throwing our hands up or ignoring it
for another 10 years.
About The Pull Request
replaces a ton of log_game with user.log_message so the log is added to individual and global logs.
adds a few logs for individual LOG_VICTIM, LOG_ATTACK etc logging.
adds logging for bluespace launchpad's tele coords being changed.
took the word "has" out of log_combat, as it's extra and just lengthens the log.
Why It's Good For The Admins
It's extremely laggy to open game.txt so an alternative is individual game logs
Changelog
cl
admin: A lot of game logs will now also be in individual game logs, for convenience in log diving.
admin: Added logging for bluespace launchpad x and y offset changes, which go to individual game logs.
admin: Attack logs will now be slightly shorter, one useless word was removed.
/cl
Replaces a bunch of tool behavior checks in attackby to instead use the respective procs.
For instance, the behavior under a if(I.tool_behaviour == TOOL_SCREWDRIVER) check in attackby() will instead be found under that same object's screwdriver_act() proc. This is the first of a few PRs that I'd like to make to address this, since there's going to be a lot of code shuffled around.
This shouldn't have any impact on players, though some super observant folks might notice that they don't bash some items with tools when they meant to interact with them. I've tested all of these in game and they seem to still have the same behavior as before.
Turfs have a variable, intact, which conflates three meanings:
Determining whether there's something that can be pried out, such as directly with a crowbar or indirectly with a tile stack and a crowbar off-hand.
Determining whether underfloor pieces are visible.
Determining whether underfloor pieces can be interacted with - by players with tools, through interaction with effects like chemical acid, or foam.
When plating is hit with a stack of tiles, /turf/open/floor/attackby checks whether the turf is intact, and if so, ends the attack chain regardless of whether or not the attempt to hotswap a turf (with a crowbar) is successful or not. However, turfs which want the underfloor to be visible - such as catwalks and glass - set the intact variable to FALSE, and so can be repeatedly placed over one another, as if they were the first tile to be placed over the plating.
This refactors /turf/var/intact into two distinct variables:
/turf/var/overfloor_placed, for whether or not there is something over plating.
/turf/var/underfloor_visible, for whether or not the various underfloor pieces should be invisible, visible, or both visible and interactable.
All references to /turf/var/intact have been replaced with an equivalent overfloor_placed or underfloor_visible reference, depending on which check is appropriate. underfloor_accessibility can take one of UNDERFLOOR_HIDDEN, UNDERFLOOR_VISIBLE, or UNDERFLOOR_INTERACTABLE. This prevents cases such as acid foam or tools phasing through glass floors to affect the underfloor pieces underneath, and covers all kinds of unusual, not-wiring-visiblity usage such as Holodeck completeness, Revenant interaction, or station integrity checking.
Adds set_density()
Fixes one instance of a duplicate density assignment on an object.
Comments two hacky usages of density which will have to forgo using the setter for now.
Lets us append code to the event of density changing.
Pretty sure this is leading up to some multitile object thing -Lemon
Converts most spans into span procs. Mostly used regex for this and sorted out any compile time errors afterwards so there could be some bugs.
Was initially going to do defines, but ninja said to make it into a proc, and if there's any overhead, they can easily be changed to defines.
Makes it easier to control the formatting and prevents typos when creating spans as it'll runtime if you misspell instead of silently failing.
Reduces the code you need to write when writing spans, as you don't need to close the span as that's automatically handled by the proc.
(Note from Lemon: This should be converted to defines once we update the minimum version to 514. Didn't do it now because byond pain and such)
* Adds explosion SFX to the blastcannon and explosive compressor
- Extracts the explosion SFX and screenshake proc from the SSexplosions explosion handling proc and lets the explosive compressor and blastcannon use it.
* Miscellaneous changes
- Adds defines for the internal explosion arglist keys
- Reverses the values of the explosion severity defines
- Changes almost everything that uses `/proc/explosion` to use named arguments
- Removes a whole bunch of argname = 0 in explosion calls.
* Removes named callback arguments.
* Changes the explosion signals to just use the arguments list
Adds a simple framework to let objects respond to explosions occurring inside of them.
Changes a whole bunch of explosions to use the object being exploded as the origin of the explosion rather than the turf the object is on.
Makes the explosive compressor and blastcannon actually use the TTVs they are given.
Adds support for things responding to internal explosions.
Less snowflake code for the explosive compressor and blastcannon calculating bomb range.*
Less confusing explosion severity defines.
Less opaque explosion arguments
*does not guarantee that the solution to letting them actually use the TTV is any less snowflake.
Creates update_name and update_desc
Creates the wrapper proc update_appearance to batch update_name, update_desc, and update_icon together
Less non-icon handling code in update_icon and friends
Signal hooks for things that want to change names and descriptions
99%+ of the changes in this are just from switching everything over to update_appearance from update_icon
Converts many proc overrides to properly use list/modifiers, fixes some spots where modifiers should have been passed, calls modifiers what it is, a lazy list, and cleans up some improper arg names like L, M, C, and N. Oh and I think there was a spot where someone was trying to pass M.name in as a string, but forgot to wrap it in []. I fixed that too.
Done using this command sed -Ei 's/(\s*\S+)\s*\t+/\1 /g' code/**/*.dm
We have countless examples in the codebase with this style gone wrong, and defines and such being on hideously different levels of indentation. Fixing this to keep the alignment involves tainting the blames of code your PR doesn't need to be touching at all. And ultimately, it's hideous.
There are some files that this sed makes uglier. I can fix these when they are pointed out, but I believe this is ultimately for the greater good of readability. I'm more concerned with if any strings relied on this.
Hi codeowners!
Co-authored-by: Jared-Fogle <35135081+Jared-Fogle@users.noreply.github.com>
* Converts everything to use setAnchored() + other fixes
* Fixed singulo debug
* singulo again
* forgot to move the vv_edit proc
* caught that this time :)
* changes
* Update code/game/atoms_movable.dm
Co-authored-by: Rohesie <rohesie@gmail.com>
Co-authored-by: Rohesie <rohesie@gmail.com>
* Renames a few variables. Also reorders fallback order again.
Renames item_state to inhand_icon_state
Renames mob_overlay_icon to worn_icon
Renames mob_overlay_state to worn_icon_state
worn_icon_state/mob_overlay_state now never gets used for inhands.
* Fixes some comments
* Fixes map issue
* Restart lints
* Properly resolves conflicts
* update_icon() improvements
Fixes some update_icon() calls to properly call parent and use update_overlays() and update_icon_state().
The rest of obj/item fuck it
* Suggested fixes, also passes the linter
* I always forget . = ..() is faster than return ..() FOR SOME FUCKING REASON
* Actually this is better
* Signilzes datum/action to update its icon when its connected item does.
removes materials list from items, uses custom_materials instead. This might introduce some bugs so we should testmerge this for a while (and Ill test stuff locally as much as I can)
this also adds material crafting to sheets. Test case being chairs. In the future we can add stuff like tables, walls, doors etc.
also applies materials to everything, with fixes, which can close#46299
* Reverts italics-span back to no color.
* Cleans up many extra spaces and indents.
* Adds 'hear' span class.
* Replaces all 'italics' used in heard messages with 'hear'.
About The Pull Request
Converts every single usage of playsound's vary parameter to use the boolean define instead of 1 or 0. I'm tired of people copypasting the incorrect usage.
Also changes a couple of places where a list was picked from instead of using get_sfx internal calls
This was done via regex:
(playsound\(.+,.+,.+, ?)1( ?\)| ?,.+\)) to match 1
(playsound\(.+,.+,.+, ?)0( ?\)| ?,.+\)) to match 0
full sed commands:
/(playsound\(.+,.+,.+, ?)1( ?\)| ?,.+\))/\1TRUE\2/ 1 to TRUE
/(playsound\(.+,.+,.+, ?)0( ?\)| ?,.+\))/\1FALSE\2/ 0 to FALSE
I'm not very good with regex and these could probably be optimized, but they worked.
Why It's Good For The Game
Code usability
Lucy