* Being protected by Shoes or Gloves against a mousetrap will now give you a message in chat telling you such, removing a surprise for those caught off-guard by it.
Co-authored-by: Mothblocks <35135081+Mothblocks@users.noreply.github.com>
Fixes#70377
Stobe shield has been broken for.... hell I don't even know how long lmao
cl ShizCalev
fix: Fixed some missing shield inhand icons.
fix: The strobe shield's inhand icon now plays the flashing animation when triggered again.
fix: The strobe shield will no longer blind the person holding it when it deflects a blow.
fix: The light from the strobe shield's flash no longer appears in your held inventory slot.
fix: Fixed the east facing left-handed strobe shield sprite being misaligned by two pixels.
/cl
* canUseTopic now uses TRUE/FALSE instead of defines that just say TRUE
The most idiotic thing I've seen is canUseTopic's defines, they literally just define TRUE, you can use it however you want, it doesn't matter, it just means TRUE. You can mix and match the args and it will set that arg to true, despite the name.
It's so idiotic I decided to remove it, so now I can reclaim a little bit of my sanity.
About The Pull Request
Fixes#69043 assemblies not providing a UI when part of a one-tank bomb. (This doesn't count voice analyzers, which don't have UI)
Fixes#68139 assemblies triggering themselves (and often turning themselves off).
Fixes timers ceasing to loop if the timer is set to less than the 3-second anti-spam threshold.
#69335, #68733 signalers occasionally runtiming due to qdel'd weak reference datums. Already addressed by another PR
Proximity sensors and mousetraps work on more wire datums, but proximity sensors are still buggy.
Igniter-sensor pairs can detonate fuel tanks properly, including plumbed fuel tanks. Fuel tank explosions scale with how much fuel is in them; this is slightly nerfed from existing values.
The fuel tank detonation code has been made generic, but other reagent dispensers have rigging turned off. If turned on with a varedit, you can rig and detonate water and other reagent tanks. Reagent tanks can theoretically both explode and spread reagents if it should happen to contain both welding fuel and other stuff. I have not actually tested this part of it, but I have detonated both water tanks and fuel tanks and each works correctly.
In making mousetraps work on wire datums, I had the opportunity to make it so that you could place a mousetrap in a door's wire and it would activate when someone passed through the door (useful to bolt a door open when someone authorized goes through, for example). This is a fun mechanic but does not make sense for a simple mousetrap to be so powerful, so it is disabled. Ideally, you could put the laser tripwire in a door's wires to do the same thing, but that would be a massive rework. Mousetraps still work in on-found mode for all wire datums, and will work on items with wiring datums (like C4 and chem bombs) when stepped on.
The signaler runtimes were a result of weak_ref datums being deleted, and the communications system not handling that. It's probably not ideal to run null checks in the post_signal loop, but I am not going to worry about it.
Many of the assemblies were not properly registering when the assembly holder was attached to an item. This was most important for proximity sensors, but that also has other problems that I haven't been able to track down.
The problem with UI not appearing was a result of the transition to TGUI however long ago that was; the proc that assures TGUI that you have the right item needed to be aware of one-tank bombs and similar, or else when you pass along an interact request it says "but you can't see it" and ignores you.
Why It's Good For The Game
Bugfixen.
The thing with the reagent dispensers only got this complicated when I realized that the plumbed fuel tank variant wasn't a subtype and therefore couldn't be rigged. And then... I basically just scaled it because the flat scale no matter the contents of the tank offended me. You could wrench open tanks, drain them entirely of fuel, rig them, and they would still go off like a pile of dynamite.
I used to have code in my branch that turned chem bombs into variants depending on the trigger, with mousetraps being mines for example. That's honestly the main reason I went out of my way to make mousetraps work better as assemblies. I could wish it were better supported, but mousetraps on grenade wiring will have to do for now.
Changelog
cl
balance: Welding fuel tank explosions have been scaled slightly down and require the fuel tanks to actually be full of welding fuel
fix: You can detonate welding fuel tanks with an igniter-sensor assembly
fix: You can reach your one-tank bomb's assembly controls by activating the item in your hand.
fix: Certain assemblies should no longer turn themselves off.
fix: Clumsy fools handling a mousetrap-based multi-part assembly may set it off by accident
/cl
* Adds the installed message phrase for voice analyzers to logging
Hey there,
Sometimes, it's CBT to figure out what exactly made a bomb go off, especially when a voice analyzer is involved. Now, when a voice analyzer is involved in TTV Bomb/Grenade explosions (already logged), it will also output the recorded phrase when present.
To do this, I just span up a quick `isvoice()` macro define to ensure that we would get the variable, and it would just append the message that we were already spitting out into logs. I rewrote how grenade logs currently operate a bit, let me know if I accidentally omitted something critical.
Moves singulo and supermatter dmis into obj/engine, renamed from obj/tesla_engine
Moves Halloween, Christmas, and misc holiday items to obj/holiday
Moves lollipops to obj/food
Moves crates, closets, and storage to obj/storage
Moves assemblies to obj/assemblies
Renames decals.dmi to signs.dmi ...because they're signs and not decals
Moves statues, cutouts, instruments, art supplies, and crayons to obj/art
Moves balloons, plushes, toys, cards, dice, the hourglass, and TCG to obj/toys
Moves guns, swords, shields to obj/weapons
* Elevators are a bit more friendly part 1
- Emaggable elevator buttons / support for emaggable device assemblies
- Delayed travel between floors
- Elevators can now show a warning sign to areas below while travelling
- Elevators can now optionally wound heavily instead of gibbing
* Adds supoprt for "lift doors"
* Comment tweak
* Splitting these variables
* Functional prototype
* multiz debug
* Elevator button framework
* Unifies these behaviors
* Emergency doors
* Lift button framework
* UI closes on floor change
* Testing changes
* Fix
* UI Tweaks
* Panel works pretty swell
* Minor tweaks
* Move to static
* Bonus tram change
* User experience
* Slight tweak to mapload stuff
* This is silly
* Some UI tweaks, need to update css
* CSS and ui overhaul
* Documentation updates.
* Multi-z lift support
* Multitile lift fix
ever see the tram take 10 milliseconds per movement to move 2100 objects? now you have
https://user-images.githubusercontent.com/15794172/166198184-8bab93bd-f584-4269-9ed1-6aee746f8f3c.mp4
About The Pull Request
fixes#66887
done for the code bounty posted by @MMMiracles to optimize the tram so that it can be sped up. the tram is now twice as fast, firing every tick instead of every 2 ticks. and is now around 10x cheaper to move. also adds support for multiz trams, as in trams that span multiple z levels.
the tram on master takes around 10-15 milliseconds per movement with nothing on it other than its starting contents. why is this? because the tram is the canary in the coal mines when it comes to movement code, which is normally expensive as fuck. the tram does way more work than it needs to, and even finds new ways to slow the game down. I'll walk you through a few of the dumber things the tram currently does and how i fixed them.
the tram, at absolute minimum, has to move 55 separate industrial_lift platforms once per movement. this means that the tram has to unregister its entered/exited signals 55 times when "the tram" as a singular object is only entering 5 new turfs and exiting 5 old turfs every movement, this means that each of the 55 platforms calculates their own destination turfs and checks their contents every movement. The biggest single optimization in this pr was that I made the tram into a single 5x11 multitile object and made it only do entering/exiting checks on the 5 new and 5 old turfs in each movement.
way too many of the default tram contents are expensive to move for something that has to move a lot. fun fact, did you know that the walls on the tram have opacity? do you know what opacity does for movables? it makes them recalculate static lighting every time they move. did you know that the tram, this entire time, was taking JUST as much time spamming SSlighting updates as it was spending time in SStramprocess? well it is! now it doesnt do that, the walls are transparent. also, every window and every grille on the tram had the atmos_sensitive element applied to them which then added connect_loc to them, causing them to update signals every movement. that is also dumb and i got rid of that with snowflake overrides. Now we must take care to not add things that sneakily register to Moved() or the moved signal to the roundstart tram, because that is dumb, and the relative utility of simulating objects that should normally shatter due to heat and conduct heat from the atmosphere is far less than the cost of moving them, for this one object.
all tram contents physically Entered() and Exited() their destination and old turfs every movement, even though because they are on a tram they literally do not interact with the turf, the tram does. also, any objects that use connect_loc or connect_loc behalf that are on the same point on the tram also interact with each other because of this. now all contents of the tram act as if theyre being abstract_move()'d to their destination so that (almost) nothing thats in the destination turf or the exit turf can react to the event of "something laying on the tram is moving over you". the rare things that DO need to know what is physically entering or exiting their turf regardless of whether theyre interacting with the ground can register to the abstract entered and exited signals which are now always sent.
many of the things hooked into Moved(), whether it be overrides of Moved() itself, or handlers for the moved signal, add up to a LOT of processing time. especially for humans. now ive gotten rid of a lot of it, mostly for the tram but also for normal movement. i made footsteps (a significant portion of human movement cost) not do any work if the human themselves didnt do the movement. i optimized has_gravity() a fair amount, and then realized that since everything on the tram isnt changing momentum, i didnt actually need to check gravity for the purposes of drifting (newtonian_move() was taking a significant portion of the cost of movement at some points along the development process). so now it simply doesnt call newtonian_move() for movements that dont represent a change in momentum (by default all movements do).
also i put effort into 1. better organizing tram/lift code so that most of it is inside of a dedicated modules folder instead of scattered around 5 generic folders and 2. moved a lot of behavior from lift platforms themselves into their lift_master_datum since ideally the platforms would just handle moving themselves, while any behavior involving the entire lift such as "move to destination" and "blow up" would be handled by the lift_master_datum.
also
https://user-images.githubusercontent.com/15794172/166220129-ff2ea344-442f-4e3e-94f0-ec58ab438563.mp4
multiz tram (this just adds the capability to map it like this, no tram does this)
Actual Performance Differences
to benchmark this, i added a world.Profile(PROFILER_START) and world.Profile(PROFILER_START) to the tram moving, so that it generates a profiler output of all tram movement without any unrelated procs being recorded (except for world.Profile() overhead). this made it a lot easier to quantify what was slowing down both the tram and movement in general. and i did 3 types of tests on both master and my branch.
also i should note that i sped up the "master" tram test to move once per tick as well, simply because the normal movement speed seems unbearably slow now. so all recorded videos are done at twice the speed of the real tram on master. this doesnt affect the main thing i was trying to measure: cost for each movement.
the first test was the base tram, containing only my player mob and the movables starting on the tram roundstart. on master, this takes around 13 milliseconds or so on my computer (which is pretty close to what it takes on the servers), on this branch, it takes between 0.9-1.3 milliseconds.
ALSO in these benchmarks youll see that tram/proc/travel() will vary significantly between the master and optimized branches. this is 100% because there are 55 times more platforms moving on master compared to the master branch, and thus 55x more calls to this proc. every test was recorded with the exact same amount of distance moved
here are the master and optimized benchmark text files:
master
master base tram.txt
https://user-images.githubusercontent.com/15794172/166210149-f118683d-6f6d-4dfb-b9e4-14f17b26aad8.mp4
also this shows the increased SSlighting usage resulting from the tram on master spamming updates, which doesnt happen on the optimized branch
optimized
optimization base tram.txt
https://user-images.githubusercontent.com/15794172/166206280-cd849aaa-ed3b-4e2f-b741-b8a5726091a9.mp4
the second test is meant to benchmark the best case scaling cost of moving objects, where nothing extra is registered to movement besides the bare minimum stuff on the /atom/movable level. Each of the open tiles of the tram had 1 bluespace rped filled with parts dumped onto it, to the point that the tram in total was moving 2100 objects. the vast majority of these objects did nothing special in movement so they serve as a good base case. only slightly off due to the rped's registering to movement.
on master, this test takes over 100 milliseconds per movement
master 2000 obj's.txt
https://user-images.githubusercontent.com/15794172/166210560-f4de620d-7dc6-4dbd-8b61-4a48149af707.mp4
when optimized, about 10 milliseconds per movement
https://user-images.githubusercontent.com/15794172/166208654-bc10086b-bbfc-49fa-9987-d7558109cc1d.mp4
optimization 2000 obj's.txt
the third test is 300 humans spawned onto the tram, meant to test all the shit added on to movement cost for humans/carbons. in retrospect this test is actually way too biased in favor of my optimizations since the humans are all in only 3 tiles, so all 100 humans on a tile are reacting to the other 99 humans movements, which wouldnt be as bad if they were distributed across 20 tiles like in the second test. so dont read into this one too hard.
on master, this test takes 200 milliseconds
master 300 catgirls.txt
when optimized, this takes about 13-14 milliseconds.
optimization 300 catgirls on ram ranch.txt
Why It's Good For The Game
the tram is literally 10x cheaper to move. and the code is better organized.
currently on master the tram is as fast as running speed, meaning it has no real relative utility compared to just running the tracks (except for the added safety of not having to risk being ran over by the tram). now the tram of which we have an entire map based around can be used to its full potential.
also, has some fixes to things on the tram reacting to movement. for example on master if you are standing on a tram tile that contains a banana and the TRAM moves, you will slip if the banana was in that spot before you (not if you were there first however). this is because the banana has no concept of relative movement, you and it are in the same reference frame but the banana, which failed highschool physics, believes you to have moved onto it and thus subjected you to the humiliation of an unjust slipping. now since tram contents that dont register to abstract entered/exited cannot know about other tram contents on the same tile during a movement, this cannot happen.
also, you no longer make footstep sounds when the tram moves you over a floor
TODO
mainly opened it now so i can create a stopping point and attend to my other now staling prs, we're at a state of functionality far enough to start testmerging it anyways.
add a better way for admins to be notified of the tram overloading the server if someone purposefully stuffs it with as much shit as they can, and for admins to clear said shit.
automatically slow down the tram if SStramprocess takes over like, 10 milliseconds complete. the tram still cant really check tick and yield without introducing logic holes, so making sure it doesnt take half of the tick every tick is important
go over my code to catch dumb shit i forgot about, there always is for these kinds of refactors because im very messy
remove the area based forced_gravity optimization its not worth figuring out why it doesnt work
fix the inevitable merge conflict with master lol
create an icon for the tram_tunnel area type i made so that objects on the tram dont have to enter and exit areas twice in a cross-station traversal
add an easy way to vv tram lethality for mobs/things being hit by it. its an easy target in another thing i already wanted to do: a reinforced concept of shared variables from any particular tram platform and the entire tram itself. admins should be able to slow down the tram by vv'ing one platform and have it apply to the entire tram for example.
Changelog
cl
balance: the tram is now twice as fast, pray it doesnt get any faster (it cant without raising world fps)
performance: the tram is now about 10 times cheaper to move for the server
add: mappers can now create trams with multiple z levels
code: industrial_lift's now have more of their behavior pertaining to "the entire lift" being handled by their lift_master_datum as opposed to belonging to a random platform on the lift.
/cl
* Fuck you (refactors ur tails)
* Errors
* Wow. Pain.
* Fixes up probably everything
* finish up here
* Fixes hard del maybe
* original owner hard del
* garbage collection runtime
* suck my peen byond
* Mapped tails
* motherfucker.
* motherrfucker. again.
* Whooopppppsie
* yeah bad idea
* Turns out external organs literally just sat in nullspace forever if their parent was deleted, and didnt Remove() themselves, causing harddels.
* So anyways I repathed all organs
* Fixes
* really.
* unit test... test
* unit test-test but it passes linters this time because im a moh-ron
* I've lost track of what im doing at this point
* Hopefully fixes hard del?
* meh
* Update code/datums/dna.dm
* things n stuff
* repath from master pull
Refactors the confusion status effect. Removes "confusion strength" and replaces it with duration, which is measured in seconds.
This also allows them to use the adjust_timed_status_effect procs instead of their own.
Fun fact! 2 years ago when confusion was refactored into status effects, all confusion effects in the game were halved in duration. They were changed to status effects, which tick every 1 second by default, from life, which tick every 2 seconds by default, without any values changing.
This PR refactors firestacks into two status effects: fire_stacks, which behave like normal firestacks you have right now, and wet_stacks, which are your negative fire stacks right now. This allows for custom fires with custom behaviors and icons to be made.
Some fire related is moved away from species(what the fuck was it even doing there) into these as well.
Oh and I fixed the bug where monkeys on fire had a human fire overlay, why wasn't this fixed already, it's like ancient.
Also changed some related proc names to be snake_case like everything should be.
This allows for custom fire types with custom behaviours, like freezing freon fire or radioactive tritium fire. Removing vars from living and moving them to status effects for modularity is also good.
Nothing to argue about since there's nothing player-facing
* Refactors dizziness into a status effect
* Refactors the dizziness setter to use the new kind
* Drunkness.
- Should drunk continue to work off of a magic value or be swapped to duration? I've not yet decided: For understandability it's preferabale for "drunk" to use a timer (they are drunk for 3 more minutes), but both adding drunk and decreasing drunk currently use weird calculations which would be difficult to carry over.
- Ballmer is a liver trait
* Dizzy was a setter, not an adjuster
* Does all the drunk effects over
- refactors examine text fully
- refactors stabilized blacks because of this
* Removed
* repaths, fixes some issues
* Minor fixes
* Some erroneous changes
* Fixes some dizziness errors
* Consistency thing
* Warning
* Undoes this change, I dont like its implementation
* max_duration
* Max amount
* Should be a negative
* max duration
* drunk doesn't tick on death
* Rework dizziness strength
* Erroneous dizzy change
* Fixes return type
* reworks hilbert's hotel ruin
* warooio
* you can now run multiple trams on the same z at the same time, trams are linked by id
* fuck
* sure
* you are a simulacra
* FUG
* dock
This PR changes how assemblies and assembly holders work, and allows you to connect more than just a signaler and an igniter together. You could have a signaler, a repeating timer, and an igniter together to constantly produce sparks. Making the assembly holder is the same as before, but now you can add assemblies to it. This also allows signalers to be triggered via right clicking them while holding them in your active hand.
This adds some new defines and flags for the rotation component that lets us remove lots of c/p code chunks. I also added documentation to all the rotation defines that currently exist and in other spots that had weird behavior.
New rotation flags:
ROTATION_GHOSTS_ALLOWED - checks if ghosts are able to manipulate objects in config and lets them rotate the object
ROTATION_IGNORE_ANCHORED - this skips checking if an object is anchored (which normally prevents us from rotating) Used mainly for chairs.
ROTATION_NO_FLIPPING - this removes the flip verb from possible right click rotation options. Used for pipes that have custom flipping verbs instead
ROTATION_NEEDS_ROOM - this checks if an object needs to have an empty spot available in target direction. Used for windows and railings.
Objects can now be rotated in the direction based on which LMB or RMB you click with when you ALT click it. LMB is counter clockwise. RMB is clockwise. Before some objects could only be rotated clockwise. Now any object that inherits the rotation component can be rotated in either direction.
There was also a bug with wheelchairs that existed from when they were ported over from another codebase. The rotation logic was broken and never allowed anyone to rotate them. This has been fixed.
Rotation for IV_drips was enabled however Alt Click was being used for another proc and rotation was ignored because of this. I removed the rotation component due to this since I didn't want to change the hotkeys for IV drips since those have an actual effect on gameplay interactions while rotation does not.
Fingerprints are no longer added when something gets rotated. Only a few objects had this enabled but I believe this interaction was very spammy and unnecessary. I can readd this as a flag if needed but for now it's removed.
Alert balloons have replaced a lot of rotation to_chat() messages for the same reason as fingerprints. Rotating objects has almost no effect on gameplay and will only clutter a player's message log.
The hotkeys for pipe interactions had to be redone since Alt clicking was already being used in some situations. For regular pipes: Right clicking now changes the pipe layer. Alt clicking rotates the pipe. For Trinary pipes: Right clicking now flips the pipe device. Alt clicking rotates the device.
ComponentInitialize() is a deprecated function and the AddComponent proc was moved to Initialize for several objects.
About The Pull Request
Converts more inputs to TGUI. Possibly all user-facing input lists in the game.
Did any surrounding text/number inputs as well
Added null choice support so users can press cancel.
Added some misc TGUI input fixes
Fixed custom vendors while I was there
I refactored a lot of code while just poking around.
Primarily, usage of .len in files where I was already working on lists.
Some code was just awful - look at guardian.dm and its non use of early returns
If there are any disputes, I can revert it just fine, those changes are not integral to the PR.
Why It's Good For The Game
Fixes#63629Fixes#63307
Fixes custom vendors /again/
Text input is more performant.
Part of a long series of TGUI conversion to make the game more visually appealing
Changelog
cl
refactor: The majority of user facing input lists have been converted to TGUI.
refactor: Tgui text inputs now scale with entered input.
fix: Many inputs now properly accept cancelling out of the menu.
fix: Fixes an edge case where users could not press enter on number inputs.
fix: Custom vendor bluescreen.
fix: You can now press ENTER on text inputs without an entry to cancel.
/cl
Atomizes a much larger PR for another time...
There are typos in span and other html messages that causes them to not render correctly or at all.
Bug fixes
Converts those instances of span to use the macro
I'm refactoring proximity monitors and fields, removing lots of bloat from both that's hardly even used. Proximity monitors no longer generate effect objects to track the surrounding area, should be less cpu expensive and easier to maintain (or phase out), read and use.
This PR also adds a couple components which may be needed for future stuff (for starters, the mirror reflection PR #62638 could use the connect_range comp)
Improving old old, ugly old code and adding some useful backend components. Tested and working.
Burnt-out flash in-hands update again
- Prevents flashing going through if the flash burns out during the attempt
- Updates name when using the flash in case burnt_out was somehow reverted to 0 to reflect that
Creates two procs in /mob/status_procs for handling drowsiness changes (with check for negative values), and refactors all code to use these procs instead of assigning values to the mob's drowsiness themselves.
bring code up to latest standards, move many procs to named files inside _HELPERS
no idea where to put some of these procs, help is appreciated
made more files to contain some unique code, deleted unsorted.dm, we can rest now
## About The Pull Request
stop forgetting to include mapload, if you don't include it then every single subtype past it by default doesn't include it
for example, `obj/item` didn't include mapload so every single item by default didn't fill in mapload
## Regex used:
procs without args, not even regex
`/Initialize()`
procs with args
`\/Initialize\((?!mapload)((.)*\w)?`
cleanup of things i didn't want to mapload:
`\/datum\/(.)*\/Initialize\(mapload`
Adds some extra vars and logic to explosion code to make powerful logging entries that should help admins narrow down when explosives get misused.
Records this new info in the feedback database and bumps the explosion version +1 as a result of this.
Made all say()s deal with encoding, audited all uses of say() to prevent double encoding or like, manually inserting span().
I left some stuff without sanitize that only draws from the code, since it's hell to clean up otherwise. That
and I let admins do whatever the fuck they want
if you create a bunch of signallers then spam the send signal button you can grind the server to a halt at low numbers and crash it at high numbers of signallers
This is an imperfect fix as a proper fix would refactor signal datums to use a subsystem but I dont feel like rewriting all of signal code thank you very much
Co-authored-by: Zephyr <12817816+ZephyrTFA@users.noreply.github.com>
Co-authored-by: Mothblocks <35135081+Mothblocks@users.noreply.github.com>
See title. Also refactors caltrops into a component because they use connect_loc_behalf which requires them to hold the state.
This also fixes COMPONENT_DUPE_SELECTIVE from just outright not working.
connect_loc_behalf doesn't make sense as an element because it tries to hold states. There is also no way to maintain current behaviour and not have the states that it needs.
Due to the fact that it tries to hold states, it means the code itself is a lot more buggy because it's a lot harder to successfully manage these states without runtimes or bugs.
On metastation, there is only 2519 connect_loc_behalf components at roundstart. MrStonedOne has told me that datums take up this much space:
image
If we do the (oversimplified) math, there are only ever 5 variables that'll likely be changed on most connect_loc_behalf components at runtime:
connections,
tracked,
signal_atom,
parent,
signal_procs
This means that on metastation at roundstart, we take up this amount: (24 + 16 * 5) * 2519 = 261.97600 kilobytes
This is not really significant and the benefits of moving this to a component greatly outweighs the memory cost.
(Basically the memory cost is outweighed by the maint cost of tracking down issues with the thing. It's too buggy to be viable longterm basically)
fixes#60197
woke up today with a ridiculous idea of semi-automatic compile time loop unrolling, wasnt worth the complexity in the least but it made the basis of this PR which i then continued work on. makes area_sensitive_contents into a more general system of important_recursive_contents where we can define reasonable uses to replace recursive contents iteration of the type found in get_hearers_in_view() as long as everything that uses it isnt something incredibly common to the point that it noticeably increases memory usage.
* Makes turfs persist signals
* Splits connect_loc up into two elements, one for stuff that wishes to connect on behalf of something, and one for stuff that just wants to connect normally. Connecting on behalf of someone has a significant amount of overhead, so let's do this to keep things clear
* Converts all uses of connect_loc over to the new patterns
* Adds some comments, actually makes turfs persist signals
* There's no need to detach connect loc anymore, since all it does is unregister signals. Unregisters a signal from formorly decal'd turfs, and makes the changeturf signal persistance stuff actually work
* bro fuck documentation
* Changes from a var to a proc, prevents admemems and idiots
* Extra detail on why we do the copy post qdel
