## About The Pull Request
Admins now have a verb to add footnotes to the roundstart threat report.
These messages can be signed, and multiple can be submitted at once.
(If no footnotes are submitted, the report does not display the
"additional notes" section)
This ALSO adds a verb to delay the roundstart threat report
indefinitely, to give some extra time. If you turn it off, be sure to
toggle it back on when you're done!
## Why It's Good For The Game
Gives admins a way to set the tone for a shift, give IC advisory on
stuff, bully the command players, or just add some flavor to the report.
We already give these chuckleheads enough platforms to shitpost from.
What's one more?
## Changelog
🆑
admin: new admin verb -- Command Report Footnote. Lets you attach a
signed message to the roundstart command report.
admin: new admin verb -- Delay Command Report. Lets you delay the
roundstart command report indefinitely.
/🆑
More than a decade ago, these were all coded to use a weird dynamic list
radio broadcasting system to communicate with each other. If there was
any depth that they were planning on creating with this, it didn't come
to fruition, and it instead just wasted a lot of init time.
Removing `post_signal` saves 198.41ms, fired 588 times from lots of
different machinery. Its self cost was 81.44ms.
`broadcast_status`, also removed, was taking 218ms.
I'm pretty sure I'm done with this, but it's hard to tell given the
nature of old radio signal code.
A small self cost of 34.9ms was added in the form of /obj/Initialize
checking id_tag to set in a global list. This could be optimized away by
tagging everything that does use id_tag, but it's a loooot and I think
this is just a useful mechanism to have. Not worth it IMO.
The "Check Atmos Chamber Devices" verb has been removed. Everything it
did *should* be replicated by runtimes on Initialize, which is both more
obvious to mappers and shows up in unit tests since we spawn every ruin.
## About The Pull Request
**Comes with an UpdatePaths!**
Removes the tablet subtype, PDAs now replaces them entirely.
Nukie and Silicon tablets are now subtypes of the PDA instead, while
contractor ones were removed entirely as they didn't do anything and
were unused (though it wouldn't be hard to re-add).
Nukie PDAs are now the only type of PDA that uses modular_tablets.dmi,
which is just larger icons of modular_pda. Each application requires an
icon state in both of these, for 2 different sizes, which makes it
annoying to make new applications, especially if it can also run on
computers/laptops.
### Icons
Because Silicon tablets are now a subtype of PDA, they use PDA icons
instead of tablet ones. Luckily for us, they already exist in code.
AI's don't use a tablet icon though, so they aren't affected.
## Why It's Good For The Game
There's very little difference between tablets and PDAs, PDAs overshadow
them in every single way, so at this point I don't see why we should
have both of these, and if you compare the two in usefulness and actual
in-game use by players, it's a no-brainer than the item all players get
roundstart and comes with a messenger should be the one we go with.
Also as said in the about section, when making an app you would need to
make icon states for the program running for all hardware it can run on,
which is Computer, Laptop, PDA, and Tablet.
Laptop is just a smaller computer icon
PDA is just a smaller tablet icon
However, you can't simply shrink the size of the icon, instead you have
to completely resprite the same app icon FOUR TIMES for it to not
bluescreen on all these different devices.
<details>
<summary>
Here's examples of it
</summary>
Computer (NOTE: *They share the same icon file as regular computers*)
<img
src="https://user-images.githubusercontent.com/53777086/203876801-486a8054-489a-4983-bdad-a2599b4dc379.png"/>
Laptop
<img
src="https://user-images.githubusercontent.com/53777086/203876333-58e5d135-f4c6-4a02-8948-1df771e294a4.png"/>
Tablet
<img
src="https://user-images.githubusercontent.com/53777086/203876352-816c7fb1-c681-40b9-99e0-052f49632c7f.png"/>
PDA
<img
src="https://user-images.githubusercontent.com/53777086/203876358-1cf7253d-3c6a-456a-8133-ebf7f0351637.png"/>
</details>
If we wish to help in simplifying this, we should remove tablet icons
entirely, which means 1 less icon to worry about. To do this, we'd need
to resprite nukie PDAs, however I am very much not a spriter and never
tried GAGS, so I'll leave it to someone else to do.
## Changelog
🆑
del: Tablets are now removed, PDAs are now the base 'tablet'. Silicon
and nukie tablets are now PDAs.
/🆑
Add helper defines for handling list values in lists to remove the
footgun where `+=` and `-=` with lists as the Right hand side argument
causes the list contents to be added or removed, not the list itself.
Use said helpers to remove the footgun from list helpers that could
reasonably be expected to get called on list of lists.
Remove duplicated clear nulls from list proc. this pr will fail to
compile until i go move those over to the preexisting one, but the
compile errors will tell me where all the consumers are.
This likely fixes some bug(s) in the issue tracker, but we don't know
what they are.
So i left over some basic `/whatever/proc/format` uses in the original
PR this fixes it.
Notable exceptions to the rule:
- Paths in add_verb/remove_verb, we need full path instead of a name
there to access verb metadata so we can't use proc ref macros there.
- regex.Replace, found out that it does not accept call by name. Instead
i added new REGEX_REPLACE_HANDLER so we can at least try to mark these.
There's still leftover global procs that do not use GLOBAL_PROC_REF but
they functionally equivalent so that's for later.
I don't see any reasonable way to grep for this. But if you got any
ideas please share.
## About The Pull Request
ERTs can now have a custom shuttle template defined on their type,
which, should the "use custom shuttle" toggle be enabled while creating
the ERT, will spawn them in deep space on the given shuttle instead of
at Centcom.
Applies the new system to the bounty hunter ERT
## Why It's Good For The Game
Not all ERTs are NT enough to start at Centcom all the time, and it
gives more control over ERTs
## Changelog
🆑
admin: ERTs can now have a custom shuttle that they can spawn on, on a
toggle while creating said ERT.
/🆑
## About The Pull Request
Hey there,
force_ending was a boolean (with inconsistent usage, flip-flopping
between using TRUE/FALSE and 1/0 variables), so let's just change it all
over to the macros and call it a good day.
I also updated documentation of the variables in that "code block" in
SSTicker while in the area because changing just one line made it look
ugly. Some of the documentation was no longer current to it's... current
use in code, so I updated those as well.
## Why It's Good For The Game
Pure code improvement, DMdocs are swell, and readability is kino.
## Changelog
Nothing here should affect players.
## About The Pull Request
Removes the last computer part in the game: ID parts
Because this is removed, I also removed all computer hardware in the
game, and removed mentions of it in the game.
There is still 'hardware', as in Computer, Tablet, or Laptop.
Computers now all hold one ID slot by default, the only time a second ID
was needed was to use the access of both at once, and for the ID
modification application. This was now replaced with a new UI that only
has one tab, one ID slot:
https://user-images.githubusercontent.com/53777086/202801939-151b783f-75c8-46bf-a6c5-1b57b0d0da8e.mp4
## Why It's Good For The Game
Computer hardware is finally dead 🦀
## Changelog
🆑
balance: All modular computers now only have one ID slot, and cannot be
upgraded.
qol: The HoP's access application now only has one app, logging in will
directly modify the ID that's in it, making it less confusing to swap
back and forth.
/🆑
## About The Pull Request
By default, all custom maps are assigned one standard configuration.
This option rather limits the possibilities for creating custom levels.
For example, you can not use multilevel maps, because with this
configuration will always be loaded only one level. With this PR I want
to provide the ability to load a configuration file for a custom map
similar to the standard map.json configs.
## Why It's Good For The Game
Allows administrators to flexibly configure custom maps. For example for
events, etc.
## Changelog
🆑
admin: Adding the ability to load the configuration of custom maps
/🆑
Co-authored-by: twilightwanderer <twilightwanderer@users.noreply.github.com>
Co-authored-by: san7890 <the@san7890.com>
## About The Pull Request
- Fully heal can be passed a series of flags detailing what all is
healed by the proc. This allows for things to provide
almost-but-not-quite fully heals.
- Uses this in Adminordrazine, so that it stops being a pain to update
every time fully heal is updated.
This includes some small balance changes which i'll go over, nothing
extremely noticable.
## Why It's Good For The Game
Allows for more precise control over full heals.
## Changelog
🆑 Melbert
refactor: Fully heal can be passed a series of flags. As a result, some
things which previously did a full heal might heal slightly less, or
some things which did partial full heals might do slightly more.
fix: Adminordrazine will no longer completely break every facet of a
person
admin: Ahealing a changeling will refill all of their chems.
/🆑
## About The Pull Request
Moves flick_overlay and flick_overlay_view to atom instead of being a
global proc
## Why It's Good For The Game
General performance and syntaxical improvements, makes it easier to
retrieve iconstates
## Changelog
🆑
fix: flick_overlay is an atom proc
/🆑
Co-authored-by: etherware-novice <candy@notarealaddr.com>
Co-authored-by: Candycaneannihalator <candycane@thisisnotarealaddr.com>
Co-authored-by: Mothblocks <35135081+Mothblocks@users.noreply.github.com>
## About The Pull Request
This replaces needless GLOB.machines with more precise lists whenever
one existed, plus adding a new one for CTF machines.
## Why It's Good For The Game
GLOB.machines holds every single /obj/machinery in the game, so checking
the whole list for stuff is pretty big. This aims to cut that down by
using smaller lists whenever possible. I also gave CTF a new list
because it checked machines very often.
## Changelog
Nothing player facing.
Makes the code compatible with 515.1594+
Few simple changes and one very painful one.
Let's start with the easy:
* puts call behind `LIBCALL` define, so call_ext is properly used in 515
* Adds `NAMEOF_STATIC(_,X)` macro for nameof in static definitions since
src is now invalid there.
* Fixes tgui and devserver. From 515 onward the tmp3333{procid} cache
directory is not appened to base path in browser controls so we don't
check for it in base js and put the dev server dummy window file in
actual directory not the byond root.
* Renames the few things that had /final/ in typepath to ultimate since
final is a new keyword
And the very painful change:
`.proc/whatever` format is no longer valid, so we're replacing it with
new nameof() function. All this wrapped in three new macros.
`PROC_REF(X)`,`TYPE_PROC_REF(TYPE,X)`,`GLOBAL_PROC_REF(X)`. Global is
not actually necessary but if we get nameof that does not allow globals
it would be nice validation.
This is pretty unwieldy but there's no real alternative.
If you notice anything weird in the commits let me know because majority
was done with regex replace.
@tgstation/commit-access Since the .proc/stuff is pretty big change.
Co-authored-by: san7890 <the@san7890.com>
Co-authored-by: Mothblocks <35135081+Mothblocks@users.noreply.github.com>
## About The Pull Request
Migrates sound toggle prefs away from legacy toggles, and changes all
related preference checks to the modern form. Cleans up unnecessary
defines linked to the old prefs. Increments the minimum save file
version so a piece of old sound related code can be neatly removed. (The
minimum version hasn't changed in two years anyone who hasn't played in
at least that long probably doesn't even remember they had prefs saved)
Splits off jukebox music into its own preference distinct from
instruments. (This was actually the change that brought about this whole
PR the rest of the igration just made sense to do at the same time)
## Why It's Good For The Game
More granularity in sound preferences is good. It is quite reasonable
for players to want to hear normal volume and largely unobtrusive
instruments, without also being subjected to the aural torture of the
jukebox. As implementing this wothout creating an unwelcome extra legacy
toggle already required setting up a non-legacy sound toggle, it is most
reasonable to migrate the other sounds at the same time.
## Changelog
🆑
qol: Jukebox music can be controlled by a new seperate preference, and
is no longer linked to the instrument sound preference option.
refactor: Sound related toggle preferences have been migrated away from
the legacy system. Pre-existing preferences should be safely migrated
but players are advised to check.
/🆑
## About The Pull Request
Area contents isn't a real list, instead it involves filtering
everything in world
This is slow, and something we should have better support for.
So instead, lets manage a list of turfs inside our area. This is simple,
since we already move turfs by area contents anyway
This should speed up the uses I've found, and opens us up to using this
pattern more often, which should make dev work easier.
By nature this is a tad fragile, so I've added a unit test to double
check my work
Rather then instantly removing turfs from the contained_turfs list, we
enter them into a list of turfs to pull out, later.
Then we just use a getter for contained_turfs rather then a var read
This means we don't need to generate a lot of usage off removing turf by
turf from space, and can instead do it only when we need to
I've added a subsystem to manage this process as well, to ensure we
don't get any out of memory errors. It goes entry by entry, ensuring we
get no overtime.
This allows me to keep things like space clean, while keeping high
amounts of usage on a sepearate subsystem when convienient
As a part of this goal of keeping space's churn as low as possible, I've
setup code to ensure we do not add turfs to areas during a z level
increment adjacent mapload. this saves a LOT of time, but is a tad
messy
I've expanded where we use contained_turfs, including into some cases
that filter for objects in areas. need to see if this is sane or not.
Builds sortedAreas on demand, caching until we mark the cache as
violated
It's faster, and it also has the same behavior
I'm not posting speed changes cause frankly they're gonna be a bit
scattered and I'm scared to.
@Mothblocks if you'd like I can look into it. I think it'll pay for
itself just off `reg_in_areas_in_z` (I looked into it. it's really hard
to tell, sometimes it's a bit slower (0.7), sometimes it's 2 seconds
(0.5 if you use the old master figure) faster. life is pain.)
## Why It's Good For The Game
Less stupid, more flexible, more speed
Co-authored-by: san7890 <the@san7890.com>
## About The Pull Request
this is terribly annoying for any sort of testing. especially if you
were to have a blind or crippled character.
instead of that, we now just make it a button in player panel
## Why It's Good For The Game
fuck
## Changelog
🆑
admin: ctrl shift click spawning no longer applies quirks
admin: adds quirk applying button to player panel
/🆑
* Moves spawners and decals to a different init/delete scheme
Rather then fully creating and then immediately deleting these things,
we instead do the bare minimum.
This is faster, if in theory more fragile. We should be safe since any
errors should be caught in compile since this is very close to a
"static" action. It does mean these atoms cannot use signals, etc.
* Potentially saves init time, mostly cleans up a silly pattern
We use sleeps and INVOKE_ASYNC to ensure that handing back turfs doesn't
block a space reservation, but this by nature consumes up to the
threshold and a bit more of whatever working block we were in.
This is silly. Should just be a subsystem, so I made it one, with
support for awaiting its finish if you want to
* Optimizes garbage/proc/Queue slightly
Queue takes about 1.6 seconds to process 26k items right now.
The MASSIVE majority of this time is spent on using \ref
This is because \ref returns a string, and that string requires being
inserted into the global cache of strings we store
What I'm doing is caching the result of ANY \ref on the datum it's
applied to. This ensures previous uses will never decay from the string
tree.
This saves about 0.2 seconds of init
About The Pull Request
This adds a new status effect called - Tower of Babel
Any carbon mob afflicted by the status effect will lose knowledge of every known language and gain a randomized one as a replacement. The affected mob will also be hit with a depressing moodlet that lasts for 15 seconds. Silicons are immune to all effects.
This effect is implemented in several ways:
Tower of Babel wizard event (all crew on the station z level are affected. The wizard is not and gains mastery of every language to taunt their victims)
Admin smite option
Admin secret event (can be reversed)
Staff of Babel (formerly the Staff of Sapping) will spawn during spawn magic wizard event
Magicarp will randomly shoot bolts of babel
Staff of Chaos will randomly shoot bolts of babel
Overdosing on Mushroom Hallucinogen will temporarily and sporadically acquire the effect
The effect can be blocked or cured in several ways:
Curators are given immunity
Reading a book of babel (via lavaland loot) cures and gives immunity
Reading a language book cures and gives immunity ONLY for that particular language
Note - The Tower of Babel does not allow tongueless, mute, or tongue tied people the ability to speak
Splits head dmi into separate files for both mob and obj icons. Kept similar to suit split categorization + some more. New files include beanie, bio, chaplain, costume, cowboy, default, hats(softcaps, fedoras, head caps, generic hats), helmet(helmets and other armored headgear/hoods), spacehelm, utility(hardhats, mostly work related hats), wizard.
Moves animal/pet head sitting icons to 1 folder, pets_head.dmi
Renames PAI head sitting icon file to pai_head.dmi
fix: Fixed a bunch of missing inhand icons.
fix: Fixed cables in electrical toolboxes not randomizing their colors.
fix: Fixed the wrong colored icon showing when trying to make cable cuffs out of cables.
fix: The collectable SWAT helmet is now using the proper icon again!
refactor: Pipecleaners and power cables now share a unified color system, so they're once again available in ALL the same colors.
imageadd: Updated the screwdriver belt overlay to represent the newer sprite.
imageadd: Added a bunch of new inhand icons. Special thanks to Twaticus for doing the helmets! <3
fix: Wirecutters now have an icon when inside a belt again!
admin: Added a new omnitool subtype that allows you to spawn all items in a typepath!
fix: Explorer gaskmasks now properly reflect their adjusted state when held.
fix: Fixed balaclavas having the wrong icon when pulled up.
fix: Fixed the base energy sword (admin spawn only) being invisible.
fix: The rainbow energy sword is now a little bit more rainbowy!
fix: Fixed an tk exploit with orange handcuffed shoes.
fix: The traitor outfit in the select equipment panel is now actually functional!
About The Pull Request
I've reworked multiz. This was done because our current implementation of multiz flattens planes down into just the openspace plane. This breaks any effects we attach to plane masters (including lighting), but it also totally kills the SIDE_MAP map format, which we NEED for wallening (A major 3/4ths resprite of all wall and wall adjacent things, making them more then one tile high. Without sidemap we would be unable to display things both in from of and behind objects on map. Stupid.)
This required MASSIVE changes. Both to all uses of the plane var for reasons I'll discuss later, and to a ton of different systems that interact with rendering.
I'll do my best to keep this compact, but there's only so much I can do. Sorry brother.
Core idea
OK: first thing.
vis_contents as it works now squishes the planes of everything inside it down into the plane of the vis_loc.
This is bad. But how to do better?
It's trivially easy to make copies of our existing plane masters but offset, and relay them to the bottom of the plane above. Not a problem. The issue is how to get the actual atoms on the map to "land" on them properly.
We could use FLOAT_PLANE to offset planes based off how they're being seen, in theory this would allow us to create lens for how objects are viewed.
But that's not a stable thing to do, because properly "landing" a plane on a desired plane master would require taking into account every bit of how it's being seen, would inherently break this effect.
Ok so we need to manually edit planes based off "z layer" (IE: what layer of a z stack are you on).
That's the key conceit of this pr. Implementing the plane cube, and ensuring planes are always offset properly.
Everything else is just gravy.
About the Plane Cube
Each plane master (except ones that opt out) is copied down by some constant value equal to the max absolute change between the first and the last plane.
We do this based off the max z stack size detected by SSmapping. This is also where updates come from, and where all our updating logic will live.
As mentioned, plane masters can choose to opt out of being mirrored down. In this case, anything that interacts with them assuming that they'll be offset will instead just get back the valid plane value. This works for render targets too, since I had to work them into the system as well.
Plane masters can also be temporarily hidden from the client's screen. This is done as an attempt at optimization, and applies to anything used in niche cases, or planes only used if there's a z layer below you.
About Plane Master Groups
BYOND supports having different "maps" on screen at once (IE: groups of items/turfs/etc)
Plane masters cannot cover 2 maps at once, since their location is determined by their screen_loc.
So we need to maintain a mirror of each plane for every map we have open.
This was quite messy, so I've refactored it (and maps too) to be a bit more modular.
Rather then storing a list of plane masters, we store a list of plane master group datums.
Each datum is in charge of the plane masters for its particular map, both creating them, and managing them.
Like I mentioned, I also refactored map views. Adding a new mapview is now as simple as newing a /atom/movable/screen/map_view, calling generate_view with the appropriate map id, setting things you want to display in its vis_contents, and then calling display_to on it, passing in the mob to show ourselves to.
Much better then the hardcoded pattern we used to use. So much duplicated code man.
Oh and plane master controllers, that system we have that allows for applying filters to sets of plane masters? I've made it use lookups on plane master groups now, rather then hanging references to all impacted planes. This makes logic easier, and prevents the need to manage references and update the controllers.
image
In addition, I've added a debug ui for plane masters.
It allows you to view all of your own plane masters and short descriptions of what they do, alongside tools for editing them and their relays.
It ALSO supports editing someone elses plane masters, AND it supports (in a very fragile and incomplete manner) viewing literally through someone else's eyes, including their plane masters. This is very useful, because it means you can debug "hey my X is yorked" issues yourself, on live.
In order to accomplish this I have needed to add setters for an ungodly amount of visual impacting vars. Sight flags, eye, see_invis, see_in_dark, etc.
It also comes with an info dump about the ui, and plane masters/relays in general.
Sort of on that note. I've documented everything I know that's niche/useful about our visual effects and rendering system. My hope is this will serve to bring people up to speed on what can be done more quickly, alongside making my sin here less horrible.
See https://github.com/LemonInTheDark/tgstation/blob/multiz-hell/.github/guides/VISUALS.md.
"Landing" planes
Ok so I've explained the backend, but how do we actually land planes properly?
Most of the time this is really simple. When a plane var is set, we need to provide some spokesperson for the appearance's z level. We can use this to derive their z layer, and thus what offset to use.
This is just a lot of gruntwork, but it's occasionally more complex.
Sometimes we need to cache a list of z layer -> effect, and then use that.
Also a LOT of updating on z move. So much z move shit.
Oh. and in order to make byond darkness work properly, I needed to add SEE_BLACKNESS to all sight flags.
This draws darkness to plane 0, which means I'm able to relay it around and draw it on different z layers as is possible. fun darkness ripple effects incoming someday
I also need to update mob overlays on move.
I do this by realiizing their appearances, mutating their plane, and then readding the overlay in the correct order.
The cost of this is currently 3N. I'm convinced this could be improved, but I've not got to it yet.
It can also occasionally cause overlays to corrupt. This is fixed by laying a protective ward of overlays.Copy in the sand, but that spell makes the compiler confused, so I'll have to bully lummy about fixing it at some point.
Behavior changes
We've had to give up on the already broken gateway "see through" effect. Won't work without managing gateway plane masters or something stupid. Not worth it.
So instead we display the other side as a ui element. It's worse, but not that bad.
Because vis_contents no longer flattens planes (most of the time), some uses of it now have interesting behavior.
The main thing that comes to mind is alert popups that display mobs. They can impact the lighting plane.
I don't really care, but it should be fixable, I think, given elbow grease.
Ah and I've cleaned up layers and plane defines to make them a bit easier to read/reason about, at least I think.
Why It's Good For The Game
<visual candy>
Fixes#65800Fixes#68461
Changelog
cl
refactor: Refactored... well a lot really. Map views, anything to do with planes, multiz, a shit ton of rendering stuff. Basically if you see anything off visually report it
admin: VV a mob, and hit View/Edit Planes in the dropdown to steal their view, and modify it as you like. You can do the same to yourself using the Edit/Debug Planes verb
/cl
* Removes overlay queuing, saves 6/7 seconds of initialize. Lightly modifies stat tracking macros
So we have this overlay queuing system right? It's build with the assumption
that the "add to overlay list" operation is real expensive, and is
thus useful to queue removals or additions.
It turns out that it just isn't, at least during init. In my testing the
operation of queuing took LONGER then the actual overlay add/remove did.
That's ignoring the cost of the subsystem's work.
I've also modified part of the stat tracking macro, since it took a good
bit of cpu time, and didn't seem to well, do anything. So far as I can
tell it always evaluates to 1
We make the assumption that a turf's heat capacity will never be 0. This is safe because we've got an override of /datum/gas_mixture for turfs that overrides 0 heat cap with 7000 (SPACE)
This is done to make cold actually flow through empty tiles, because we are hacks.
I forgot to include type in my gas mixture creation logic, so this was being dropped. FIXXXX
* Adds a quick way to view notes from ticket panel
One thing that I hear be thrown around administration channels a lot is "If I had checked the notes, I would have been more fair on their ban!". Well, have a fast way to keep checking those notes!
* Fixes Bread Smite Causing Some Fucked Up Shit
Hey there,
So basically, when you had the bread smite done on you, you were _just_ added to the contents of the bread. Nothing more. That means that you could pick it up. You couldn't add it to your bag (it would always return back into your hand(?)), but it would create some weird oddities that was just cursed in general. Let's make it so you can't hold the container that you are contained within by giving you HANDS_BLOCKED.
* actually we don't need the named arg
lets get rid of the cursed thing entirely
* removes sanity check
* we do a bit of component trolling
THIS TOOK ME TWO HOURS FUCK YOU
* removes cruft comment
* cleans up code a teeny bit, upgrades to incapacitated
* wait that named arg is still there wtf
* Review Time
Co-authored-by: Seth Scherer <supernovaa41@gmx.com>
* wrong operator and wrong order of operations
* null out the container
Co-authored-by: MrMelbert <51863163+MrMelbert@users.noreply.github.com>
* checks to see if container is qdeld
* weakref time
Co-authored-by: Seth Scherer <supernovaa41@gmx.com>
Co-authored-by: MrMelbert <51863163+MrMelbert@users.noreply.github.com>
Hey there,
It's mostly on the tin. It really looked kinda ugly spitting out the information + the drawing right into chat, so let's wrap it in a nice examine_block to keep it looking good. I added some line breaks because I thought it also aided the formatting.
* A lot of shuttle code improvements
* Makes use of ``as anything`` in many places
* Adds mapload to connect_to_shuttle()
* Renames many vars, including shuttle 'id' var to 'shuttle_id' and engine 'state' to 'engine_state'.
* Engines now weakref their attached ship, and disconnect when unwrenched from it.
* Removes check for force when deleting a mobile docking port, being deleted should still clear your stuff, regardless of being forced.
Because of all the above, I was able to remove a few pointless checks scattered around, like engine's alter_engine_power()
* better comment for port_id
* Fixes Cargo, Arrivals, and Pirate ships.
* Merge branch 'master' into shuttlecode-oh-no
* last few
* fixes the CI
* fixes
* Fixes infinite engines
* Revert "Merge branch 'master' into shuttlecode-oh-no"
This reverts commit 94eba37de9fe3f4a01dc40bb064771b764f379e3.
* trammies
* whiteship tram
* Makes use of ?. instead
apparently this is what weakrefs use, so 🤷
* i hate supernovaa41
Co-authored-by: Seth Scherer <supernovaa41@gmx.com>
* removes lateinit that I never implemented
* adds _ref to weakref var name
* small change to weld time define
Co-authored-by: Seth Scherer <supernovaa41@gmx.com>
About The Pull Request
When CTF map unloading was originally created in had an unforeseen consequence of not entirely removing parts of the ongoing CTF round, namely the flags, as a result of this, this system that was originally made as a precursor to map rotation was not really usable. Since this was added various PRs have made this more and less buggy but the recent CTF voting PR has caused unloading CTF rounds to be a one way process without far more involved admin intervention to reverse. As such, I've made the disable CTF buttons admins have access to only disable CTF and not unload the map entirely. I've left the function to unload the map in incase a situation arises where an admin or maintainer really needs to get rid of the CTF map.
Removing this functionality also removes a really clunky but theoretical function of it, being that you could repeatedly unload and reload the CTF map to get one of your choice, since this is not an option anymore this PR also allows admins to pick a CTF map when they start CTF themself.
EDIT: I fixed the bug introduced by the CTF voting PR, CTF maps can now be reloaded after being unloaded, the flag issue is still around so it shouldn't be used without admin supervision however. Also unloading is a debug verb now.
Why It's Good For The Game
Map unloading was super buggy so it shouldn't be easily accessible.
Since admins cannot repeatedly unload and reload CTF maps anymore to get the one they want they can now just pick the one they want from a list which is significantly less dumb.
Changelog
cl
admin: When admins start CTF they can now choose which map is played or choose random as its always been
admin: Admins can no-longer permanently break CTF by unloading the map accidentally
spellcheck: Fixed a typo in the Map Description for CTF Cruiser
fix: CTF can now be reloaded after being unloaded
/cl
* Micro optimizes ssair's turf init, saving 2 seconds
Most of this is making existing operations do more legwork, or cheaper.
I did add cycle checking to ONLY init turf linking, which required
creating a new proc.
Did some horrible horrible things in said proc to save like 0.8 seconds.
I think it was worth it.
* Rocking The Boat, er, Map Vote
Hey there,
A while ago, I spooke (typo intentional) to some other people. One frustration I heard was the fact that people would sometimes sneak through map votes during the very start of a shift, during a high-paced portion, or just as a meme. People in OOC would then flood the vote, putting in any given station. However, if a vote happens 10 minutes in- and the round goes for 70 minutes and not many of the original players are around, then it's not particularly fair to those who have to play next shift on a map they bemoan.
So, we can rock the vote! If a player isn't particularly chuffed with the hand they are given, they can poll the players to see if they want to change the map as well. If rocking the vote goes through, huzzah, you get the ability to vote for the map again. If it doesn't go through: tough luck. You can rock the vote one time per shift by default, and server operators can change the amount of times you can call to rock the map vote at their discretion. Calling to rock the vote either successfully or non-successfully counts as a "call", and when that limit is exceeded: no more calls.
Does this mean that we will only rotate between two maps because pissants will keep rocking the vote until they get what they like? Maybe? I still see people bemoan getting Tram or shit the bed over IceBox, but I think enough people get sick of bread-on-butter to take the server where it need to go. If operators don't really like seeing only two maps play, they can always adjust the config to ensure it doesn't happen.
* makes the grammar grammar
it would be "Rock the Vote vote" otherwise
About The Pull Request
Reorganizes the entire icons/mob folder.
Added the following new subfolders:
nonhuman-player (this was initially just called "antag", but then I realized guardians aren't technically antags)
simplemob
silicon
effects (for bloodstains, fire, etc)
simplemob/held-pets (for exactly that -- I wasn't sure if this should go in inhands instead)
species/monkey
Moves the following stuff:
All human parts moved into species, with moth, lizard, monkey, etc parts moved to corresponding subfolders. Previously, there were some moth parts in mob/species/moth, and others just loose in mob. Other species were similar.
icemoon, lavaland, and jungle folders made into subfolders of simplemob
All AI and silicon stuff, as well as Beepsky et al. into the silicon folder, simplemobs into the simplemob folder, aliens into the nonhuman-player folder, etc.
Split up animal_parts.dmi into two bodyparts.dmi which were put in their respective folders (species/alien and species/monkey)
Code changes:
Filepath changes to account for all of this
Adds a check when performing surgery on monkeys and xenos, because we can no longer assume their limbs are in the same file
Turns some hardcoded statues and showcases that were built into maps into objects instead
Things I'd like to do in the future but cant be assed right now:
Remove primarily-antag sprites from simplemob/mob.dmi (Revenant, Morph, etc.) and put them in the nonhuman-player folder
Split up mutant_bodyparts.dmi into different files for Tizirans, Felinids, monkeys, etc and put them in their own folders. Those may have once been meant primarily for mutated humans but that's now how they're being used right now.
About The Pull Request
The admin deadsay command is old and still based on the assumption that ghosts and admins are the only ones that can hear deadchat messages, while using a snowflake loop that's pretty much superseded by the deadchat_broadcast proc.
About The Pull Request
Brings back the scrubber overflow event, previously removed in #53549
This version has nerfed numbers because foam changes made it stupidly powerful.
Also snake_cases some event variables.
Why It's Good For The Game
More dangerous but not station-damaging events. Bonus: janitor content.
Changelog
cl
add: Re-adds the scrubber overflow event as a random event
/cl
When I changed the syntax of SS13.lua to account for the ability to properly index tables with datums, it turns out that the callbacks created for signal handlers and timeouts had circular references, resulting in hard-deletes.
My first solution was to make it so signal handler and timeout callbacks use weakrefs, which get resolved in lua_state/call_function, but it turns out that, when calling the signal cleanup function, a qdeleted-but-not-yet-garbage-collected datum's weakref resolves to null because datum.gc_collected is set to GC_CURRENTLY_BEING_QDELETED before COMSIG_PARENT_QDELETING gets sent.
To resolve this issue, Potato and Oranges both recommended that I make a snowflake variant of resolve which ignores whether the datum a weakref points to is qdeleted - only that it is null or it's weakref isn't the very weakref resolve was called on. This proc was given a lengthy autodoc comment describing when it should or shouldn't be used, to ensure it is only used in cases similar to the one I needed to create it for (needing to resolve a weakref to a datum in a COMSIG_PARENT_QDELETING handler registered on that very datum).
When trying to run getFlatIcon using lua scripting, I discovered that it was so expensive that, for certain atoms like complex humans, there is no way it will complete within the lua execution limit. While Mothblocks would suggest just raising the execution limit, the idea leaves a bad taste in my mouth due to the possibility of a script causing extreme lag by consistently overrunning the BYOND tick.
I instead elected to make /datum/auxtools_promise sleep once before invoking its assigned proc, thus immediately returning execution to lua, even if the proc being awaited wouldn't sleep. This allows for awaiting extremely expensive non-sleeping procs (like the aforementioned getFlatIcon)
Moves singulo and supermatter dmis into obj/engine, renamed from obj/tesla_engine
Moves Halloween, Christmas, and misc holiday items to obj/holiday
Moves lollipops to obj/food
Moves crates, closets, and storage to obj/storage
Moves assemblies to obj/assemblies
Renames decals.dmi to signs.dmi ...because they're signs and not decals
Moves statues, cutouts, instruments, art supplies, and crayons to obj/art
Moves balloons, plushes, toys, cards, dice, the hourglass, and TCG to obj/toys
Moves guns, swords, shields to obj/weapons
* preparations for self-referential list conversion
* additional changes for the auxlua 1.1.1 update
* fixed a type in `SS13.await`
* bumps auxlua to 1.2.0
* bumps auxlua to 1.2.1
* Obstructed Vents and Scrubbers? - Debug Them Out!
Hello there,
In _May of 2014_, Ikarrus wrote the following (here)[https://tgstation13.org/phpBB/viewtopic.php?f=11&t=327]:
"Avoid placing scrubbers and air vents under objects. It's better to leave them in the open and visible so people can use them."
How far we have fallen. However, during a review I did in the last week, I accidentally let one of these (in multiple occurrences!) slip past me:
I don't want that to happen again. It's especially hard when they're under tables, or big bulky lockers, and under computers sometimes! They're not obvious to the human eye, so we must rely on technology. This creates a new Debug Mapping Verb that will flag out any vent, scrubber, or canister port that is being obstructed by an invalid object (directionals and undertiles are excluded). It will be a gargantuan effort unlike anything you've seen to get rid of all of them, but at least this is the first stone in a grand arch.
* Updates some variable names, adds some more logging
* Update code/modules/admin/verbs/mapping.dm
Co-authored-by: John Willard <53777086+JohnFulpWillard@users.noreply.github.com>
* Update code/modules/admin/verbs/mapping.dm
* no more single letter var
* early continue
Co-authored-by: John Willard <53777086+JohnFulpWillard@users.noreply.github.com>
Atomized from #68816, with a little addition. Fixes some dumb formatting issues with the lua editor, adds a "jump to bottom" button when viewing the state log, and paginates the state logs.
