## About The Pull Request
[Removes the pretense of relative multiz
levels](https://github.com/tgstation/tgstation/pull/76248/commits/0293fdc2bd8c8af7a0d18da33265e060789c71f7)
Our multiz system does not support having a z level that is only
connected one way, or which goes down backwards or anything like that.
That's a fiction of the trait system, the actual backend has never
really supported this.
This pr removes the assumptions we were making backend around this, and
uses that to save cpu time.
I am also converting multiz_levels from an assoc list to a pure one,
which saves significantly on access times and cleans up the code
somewhat.
Also I'm making the get_below/get_above procs into macros, for the sake
of cpu time.
[Converts the starlight disease to use BYOND's directional defines
instead of our
own](https://github.com/tgstation/tgstation/commit/7d698f02d991eb4e1bde56314c657cf6e48ceb5d)
To some extent spurred on by
https://github.com/DaedalusDock/daedalusdock/pull/298, tho it was known
before
## Why It's Good For The Game
Faster multiz code, faster init, etc etc etc
## About The Pull Request
There is a 10% chance of getting one of 3 new diseases when you eat
dirty things.
Things become dirty when left on the floor for [more than 5
seconds](https://en.wikipedia.org/wiki/Five-second_rule).
But you can wash (with any method you know from spraying water to
cleaning with soap) or cook them later to avoid this.
Packaged, bowled, canned food (any food that spawns package as trash
afterwards) is protected from this effect.
Makes crafted food spawn on nearby tables when the hands are full.
Except the one behind you.
#### New diseases:
40% chance:
40% chance (Vomiting is of special type that does not stun):
20% chance:
## Why It's Good For The Game
Things that are left on the floor for too long intentionally are trash
that should be disposed by janitor. If you make a meal or prepare a
medication, it makes sense that you should keep your product sanitized.
Things that are dropped unintentionally are supposed to be picked up
quickly. "Oops I dropped this pie, need to pick it up quickly before the
germs spread". 5 seconds are enough for this. If you didn't manage you
will be like "Oh dammit, now I need to wash this pie in a sink".
Now players will consider to not just throw items meant for eating onto
the floor neglecting the fact that it looks odd. If they still ignore
it, people who consume the items will receive a harmless but annoying
disease.
In general this PR aims to force some IC gameplay onto Medics, Chefs and
Botanists so that they care a bit more about things they make for other
players.
The items have a warning message saying that they are dirty and
dangerous, so the consumers have a way to detect dirty items and an
option to wash them with soap/rag/sink/shower/fire extinguisher to
remove the harmful part from the edible item.
So to avoid this, players just need to examine an item before eating it.
Botanists can spray a pile of fruits from a hose for the same effect,
and washed items that stay on floor dont regain germs until moved to
another tile.
Food that converts into another item during cooking (like meat slab
turning into steak) or crafting, will not retain the infection. This
kinda simulates the sanitizing during cooking.
Medics can use elevated structures (e.g. conveyor belt) to avoid getting
their pills dirty during creation in plumbing. Or they can wash the
pills they want to distribute in the shower before packaging them into
pill bottles or a bag.
## Changelog
🆑
add: Food and pills have a 10% chance to infect with one of three new
diseases on consumption when left for more than 5 seconds on the floor.
You can wash it to avoid disease. ChemMaster and Pill Press are added to
the list of elevated structures (Considered as tables for pills). Made
harvest spawn on top of hydrotrays to stay protected from germs.
add: Added three new advanced diseases: Gastritium, Carpellosis, Nebula
Nausea with static cures obtained by digesting dirty food.
fix: Food no longer decomposes on Hydrotrays, Grilles, Bonfires and all
dense kitchen machinery
code: Decomposition now uses `germ_sensitive` component and follows 5
second rule too.
qol: Crafted food items spawns on nearby tables (except the one behind
you) instead of dropping on floor when hands are full.
/🆑
Theres one player-facing change in this PR and it's that I removed human
gibs from being valid in space turfs, making it more consistent with the
other gib decals.
I've cleaned up many instances of decals spawning in bad turfs on
mapload in https://github.com/tgstation/tgstation/pull/75189, but making
it error anytime in-game a decal is put over an invalid turf is bad as
it punishes contributors for not optimizing their decals properly.
This changes it so it only errors if it's on mapload, unit testing or
not.
I've also removed ``turf_loc_check`` and replaced instances of it with
overwriting ``NeverShouldHaveComeHere``, which gives us greater control
of where decals can be placed.
This let me remove 2 subtypes that were made to have decals in specific
places (which then got placed elsewhere, ruining it all).
Mappers are still able to set decals to be placed anywhere, they just
need to add it as a valid turf for that decal.
## About The Pull Request
Unit tests will now fail if there's a decal in a wall or open space
turf. Open space turf could be limiting to mappers but I don't think it
makes sense for decals (like dirt, glass shards, etc) to be floating
around in space in the exact same spot.
If there's a decal you want to put in space, decals have a
``turf_loc_check`` var that will bypass this.
**Important note: This is not changing existing behavior. Decals already
delete themselves when they spawn in these incorrect locations, we're
just avoiding them from spawning in the first place.**
### Changes I made
- Ash flora are now lava immune, rivers spawn after flora does, so I
decided that it would be easiest (and more flavorful) to have them be
lava-immune rather than to not have them spawn at all.
- Decals can now be spawned in non-turf locations. This is currently
done by mail, which can give you bones as part of the mail. Currently it
will just delete itself instead.
- Trading Card button is now on the same tile as their display, which
now uses an offset. Before it would spawn it on the tile next to it,
which could be a wall in some instances.
- Mirrors now have floating movement type. They ARE floating since
they're attached to the wall, and it prevents them from burning up due
to lava in the Pride ruin.
- I also added a broken mirror subtype because I thought the icon_state
check was terrible.
- Bubblegum called ``DestroySurroundings`` several times on the same
thing, I hopefully fixed some of that. Their charge ability also
registered ``COMSIG_MOB_STATCHANGE`` despite ``/datum/action`` doing it
by default, so I fixed that too.
## Why It's Good For The Game
Decals in walls is already a bad idea, but currently all it does is
delete it on Initialize. It would be better if we ensured they wouldn't
spawn in the first place.
## Changelog
🆑
fix: Lava will no longer burn 6 of the mirrors in pride ruin
fix: Lava will no longer burn plants that spawn in them.
/🆑
## About The Pull Request
The current broken tiles have some visual issues:
- There is an ambient occlusion shade when it touches normal tile
- It has a layer higher than it should be which leads to things that are
normally above the floor layer, render below it. Such as atmos
machinery, cleanable overlays, etc.
This PR makes the render on a proper layer and work like a partially
destroyed floor tile that can be reclaimed with crowbar.
Also, the cleanables are now on FLOOR_CLEAN_LAYER to make dirt appear
above catwalks and these new tiles.
And the flat dirt now has 4 variants of sprites, while dust uses the old
dirt sprite. It seems like dust was just dirt with different description
before.
## Why It's Good For The Game
A broken tiling with no visual bugs and proper floor-like logic.
## Changelog
🆑 MTandi, Borbop
fix: Dust now has dust icon, instead of dirt icon. Dust on all maps
replaced with dirt
image: Flat dirt now picks from 4 new sprites
refactor: Made broken tiling work more like tiling and have
corresponding visuals. Added directional mapping variants.
fix: Cleanables now use FLOOR_CLEAN_LAYER to make sure that trash is
visible above catwalks
/🆑
## About The Pull Request
I was using the step_x procs when I should have been using get_step_x
and Move()
This was causing some mob behavior to not properly respect things like
gravity or potentially entered/exited signals.
Also ensures we pass direction into Move consistently, and deletes a
function that was meant to like, use step_to but with directions? Was
never actually used properly
I forgot to properly respect the "don't change dir" flag
Closes#75673🆑
fix: Mobs will fly around space... less
/🆑
basically ex_act's implementation on basic mobs would call parent and
then react to it's value, this is presumably to do the first check about
space vine mutations and whatever. the problem is that the `/mob/living`
implementation would itself also call parent, and that would always
return null because `/atom/proc/ex_act` doesn't have a set return value.
So, this simply would _always_ early return, with ex_act presumably
*never* working on basic mobs for at least four months now.
I decided to then change up the return values for pretty much all
implementations of `ex_act()` since there was no rhyme or reason to
returning null/FALSE/TRUE, and documenting why it's like that.
Just to make sure I wasn't breaking anything doing this (at least on
base implementations), I wrote a unit test for all of the three major
physical types in game (objs, mobs, turfs) because i am a paranoid
fuckar. we should be good to go now though.
## Why It's Good For The Game
i noticed this because placing c4's on sargeant araneus wouldn't
actually damage it whatsoever. now it actually does the stated 30
damage, but araneus has like 250 health so it doesn't actually matter in
the long run. whatever at least it does the damn 30 now.
also adds a unit test for this specific case as well as a range of other
cases to ensure this stuff doesn't silently break in this way anymore
## About The Pull Request
Removes a bunch of sound files that we don't use and moves some sound
files into better locations. I'm hoping to get an archive repo for
sounds going, much like the
[map_depot](https://github.com/tgstation/map_depot) and
[SS13-sprites](https://github.com/tgstation/SS13-sprites).
EDIT: The old sound files are being moved here:
https://github.com/tgstation/SS13-sounds
Also increased the volume of the clownana rustle sound and clipped off
some dead air from shockwave_explosion
## Why It's Good For The Game
Removes a total of 1.95MB worth of unused sound files from the codebase.
## Changelog
🆑 Tattle
soundadd: increased the volume of the clownana rustle
/🆑
---------
Co-authored-by: tattle <article.disaster@gmail.com>
## About The Pull Request
Pinata's drop various items when struck with a sufficiently powerful
weapon. This PR adds two types, a standard one which can be bought from
cargo which contains various candy items and a syndicate one which
contains both candy items and explosives purchasable by clown
operatives.
The pinata functionality is also a component so admins can turn any
structure/machine/mob into a pinata and customize the "candy" inside
Sprites by @Mey-Ha-Zah animated versions by me
## Why It's Good For The Game
Adds a cute little celebration themed structure that can be bought by
players to accommodate a celebration based gimmicks or the party trait.
I think the options on things to do as a crew during a celebration are a
bit limited at present with most of the options being making/purchasing
food, activity wise the main example of a celebration item is pin the
tail on the corgi which is a bit uninteresting, the pinata on the other
hand is more cathartic and provides a "reward" in the form of various
candy items for people who participate in smashing it. I also think its
just funny to have clown operative gambling half their TC to try and get
explosives.
## Changelog
🆑 Mey-Ha-Zah & NamelessFairy
add: Added pinata crates to cargo, they contain various candy items. Fun
at parties.
add: Clown operatives can now purchase a weapons grade pinata, this
contains both candy and explosives. Still fun at parties.
admin: Admins can now turn players, mobs and objects into pinata's with
the new pinata component.
/🆑
## About The Pull Request
Over the years I've heard quite a few lizard players scratch their heads
in confusion due to the lack of gibs filling you up. I gave it a fairly
low value of 2 so people don't end up trying to power game it.
## Why It's Good For The Game
Adding an alternative use to gibs is always nice, at the moment it's
mostly just used for soap and cytology (Which barely anyone does.)
## Changelog
🆑
balance: Gibs now provide a small amount of nutriment.
/🆑
This one is fun.
On every /turf/Initialize and /atom/Initialize, we try to set
`smoothing_groups` and `canSmoothWith` to a cached list of bitfields. At
the type level, these are specified as lists of IDs, which are then
`Join`ed in Initialize, and retrieved from the cache (or built from
there).
The problem is that the cache only misses about 60 times, but the cache
hits more than a hundred thousand times. This means we eat the cost of
`Join` (which is very very slow, because strings + BYOND), as well as
the preliminary `length` checks, for every single atom.
Furthermore, as you might remember, if you have any list variable set on
a type, it'll create a hidden `(init)` proc to create the list. On
turfs, that costs us about 60ms.
This PR does a cool trick where we can completely eliminate the `Join`
*and* the lists at the cost of a little more work when building the
cache.
The trick is that we replace the current type definitions with this:
```patch
- smoothing_groups = list(SMOOTH_GROUP_TURF_OPEN, SMOOTH_GROUP_FLOOR_ASH)
- canSmoothWith = list(SMOOTH_GROUP_FLOOR_ASH, SMOOTH_GROUP_CLOSED_TURFS)
+ smoothing_groups = SMOOTH_GROUP_TURF_OPEN + SMOOTH_GROUP_FLOOR_ASH
+ canSmoothWith = SMOOTH_GROUP_FLOOR_ASH + SMOOTH_GROUP_CLOSED_TURFS
```
These defines, instead of being numbers, are now segments of a string,
delimited by commas.
For instance, if ASH used to be 13, and CLOSED_TURFS used to be 37, this
used to equal `list(13, 37)`. Now, it equals `"13,37,"`.
Then, when the cache misses, we take that string, and treat it as part
of a JSON list, and decode it from there. Meaning:
```java
// Starting value
"13,37,"
// We have a trailing comma, so add a dummy value
"13,37,0"
// Make it an array
"[13,37,0]"
// Decode
list(13, 37, 0)
// Chop off the dummy value
list(13, 37) // Done!
```
This on its own eliminates 265ms *without space ruins*, with the
combined savings of turf/Initialize, atom/Initialize, and the hidden
(init) procs that no longer exist.
Furthermore, there's some other fun stuff we gain from this approach
emergently.
We previously had a difference between `S_TURF` and `S_OBJ`. The idea is
that if you have any smoothing groups with `S_OBJ`, then you will gain
the `SMOOTH_OBJ` bitflag (though note to self, I need to check that the
cost of adding this is actually worth it). This is achieved by the fact
that `S_OBJ` simply takes the last turf, and adds onto that, meaning
that if the biggest value in the sorting groups is greater than that,
then we know we're going to be smoothing to objects.
This new method provides a limitation here. BYOND has no way of
converting a number to a string at compile time, meaning that we can't
evaluate `MAX_S_TURF + offset` into a string. Instead, in order to
preserve the nice UX, `S_OBJ` now instead opts to make the numbers
negative. This means that what used to be something like:
```dm
smoothing_groups = list(SMOOTH_GROUP_ALIEN_RESIN, SMOOTH_GROUP_ALIEN_WEEDS)
```
...which may have been represented as
```dm
smoothing_groups = list(15, MAX_S_TURF + 3)
```
...will now become, at compile time:
```dm
smoothing_groups = "15,-3,"
```
Except! Because we guarantee smoothing groups are sorted through unit
testing, this is actually going to look like:
```dm
smoothing_groups = "-3,15,"
```
Meaning that we can now check if we're smoothing with objects just by
checking if `smoothing_groups[1] == "-"`, as that's the only way that is
possible. Neat!
Furthermore, though much simpler, what used to be `if
(length(smoothing_groups))` (and canSmoothWith) on every single
atom/Initialize and turf/Initialize can now be `if (smoothing_groups)`,
since empty strings are falsy. `length` is about 15% slower than doing
nothing, so in procs as hot as this, this gives some nice gains just on
its own.
For developers, very little changes. Instead of using `list`, you now
use `+`. The order might change, as `S_OBJ` now needs to come first, but
unit tests will catch you if you mess up. Also, you will notice that all
`S_OBJ` have been increased by one. This is because we used to have
`S_TURF(0)` and `S_OBJ(0)`, but with this new trick, -0 == 0, and so
they conflicted and needed to be changed.
## About The Pull Request
This PR adds reinforced plating and a corresponding baseturf_helper,
plating that cannot be deconstructed with the RCD and requires a few
steps to degrade to regular plating.
The plating is designed to serve the same purpose as R-Walls but for
verticality. It shares its heat resistance with reinforced floor and
hull, and in texting it can endure a single C4 blast but not X4 assuming
the floor placed on it is already removed.
It is currently is unused on the existing maps due to it being poor
practice to place secure locations that would justify reinforced floors
on the lower Z levels, however I have spoken to people working on maps
actively at the moment and they have express interest in being able to
use these floors.
The plating can be constructed by using 2 sheets of plasteel on standard
plating and is disassembled using wrench > welding tool > crowbar. The
first stage of deconstruction causes the bolts holding the
reinforcements in place to fall to the Z level below playing a sound and
leaving a cleanable decal, adding a audio-visual alert that someone is
about to come through your ceiling.
UPDATE: I've added a ceiling variant of the baseturf editor, this can be
placed on a lower Z level where it will modify the baseturfs of the Z
level above within the original area. This will make it significantly
easier to ensure that you only cover tiles you want reinforced when
protecting lower Z levels.
If anyone has any recommendations for sounds please tell me and I might
swap them out but I think the two I've chosen work well. Additionally if
anyone is able to make a better sprite for the screws or plates then
that'd be a great help but I think the current ones work well enough.
## Why It's Good For The Game
Currently Multi-Z maps have a very tight restriction on where secure
areas can be put, only allowing for them to be placed on the top Z
level, under more secure Z levels or in exterior satellites and coated
with hulls. This is due to standard plating and/or reinforced floors are
very easy to get through without warning if you bring the right tools.
This PR effectively adds R-Walls but for floors allowing mappers to
properly protect lower Z levels from vertical infiltration methods. This
also adds a visual and audible indictor to the deconstruction of
reinforced floor tiles to bring them more in line with the visuals of
deconstructing a wall.
## Changelog
🆑
add: You can now reinforce plating to protect your department from the
troublemakers upstairs. Station builders might find these useful to put
the stations most secure locations on the lower floors.
imageadd: added sprites for reinforced plating
code: RCD proofing has been variablized and can now be applied to any
floor type instead of just reinforced floors.
/🆑
## About The Pull Request
This PR fixes#70716 by having flypeople ingest vomited reagents into
their stomach instead of directly modifying nutrition. To accomplish
this, flypeople no longer vomit their entire stomach contents every life
tick, which also fixes them vomiting immediately on spawn. Instead they
vomit only after taking bites of food.
Since flypeople aren't currently metabolizing food the same way as other
species there's a huge discrepancy in nutrition gained from food. For
example, a human gets 37 nutrition from a slice of pizza and 270
nutrition from a whole margherita pizza, but a flyperson only gets 10
and 70 respectively, meaning they'd need to eat 4 entire margherita
pizzas and slurp up the vomit to go from total starvation to being
satiated again. With this change flypeople get ~190 nutrition from a
whole margherita pizza.
## Why It's Good For The Game
Makes it easier for flypeople to stay satiated without having to consume
mass amounts of food. Also makes it easier and more predictable to deal
with flyperson interactions with other reagents getting in their stomach
- for example, currently taking a happy pill causes flypeople to vomit
due to the sugar.
## Changelog
🆑
fix: Flypeople gain a comparable amount of nutrients from vomited food
to other species (~70%, up from ~30%)
fix: Flypeople no longer vomit after drinking fluids
fix: Flypeople no longer vomit all contents of their stomach on spawn
code: Stomachs can now react to foods entering them by overriding the
`after_eat` proc
/🆑
Co-authored-by: Mothblocks <35135081+Mothblocks@users.noreply.github.com>
Makes the code compatible with 515.1594+
Few simple changes and one very painful one.
Let's start with the easy:
* puts call behind `LIBCALL` define, so call_ext is properly used in 515
* Adds `NAMEOF_STATIC(_,X)` macro for nameof in static definitions since
src is now invalid there.
* Fixes tgui and devserver. From 515 onward the tmp3333{procid} cache
directory is not appened to base path in browser controls so we don't
check for it in base js and put the dev server dummy window file in
actual directory not the byond root.
* Renames the few things that had /final/ in typepath to ultimate since
final is a new keyword
And the very painful change:
`.proc/whatever` format is no longer valid, so we're replacing it with
new nameof() function. All this wrapped in three new macros.
`PROC_REF(X)`,`TYPE_PROC_REF(TYPE,X)`,`GLOBAL_PROC_REF(X)`. Global is
not actually necessary but if we get nameof that does not allow globals
it would be nice validation.
This is pretty unwieldy but there's no real alternative.
If you notice anything weird in the commits let me know because majority
was done with regex replace.
@tgstation/commit-access Since the .proc/stuff is pretty big change.
Co-authored-by: san7890 <the@san7890.com>
Co-authored-by: Mothblocks <35135081+Mothblocks@users.noreply.github.com>
About The Pull Request
I've reworked multiz. This was done because our current implementation of multiz flattens planes down into just the openspace plane. This breaks any effects we attach to plane masters (including lighting), but it also totally kills the SIDE_MAP map format, which we NEED for wallening (A major 3/4ths resprite of all wall and wall adjacent things, making them more then one tile high. Without sidemap we would be unable to display things both in from of and behind objects on map. Stupid.)
This required MASSIVE changes. Both to all uses of the plane var for reasons I'll discuss later, and to a ton of different systems that interact with rendering.
I'll do my best to keep this compact, but there's only so much I can do. Sorry brother.
Core idea
OK: first thing.
vis_contents as it works now squishes the planes of everything inside it down into the plane of the vis_loc.
This is bad. But how to do better?
It's trivially easy to make copies of our existing plane masters but offset, and relay them to the bottom of the plane above. Not a problem. The issue is how to get the actual atoms on the map to "land" on them properly.
We could use FLOAT_PLANE to offset planes based off how they're being seen, in theory this would allow us to create lens for how objects are viewed.
But that's not a stable thing to do, because properly "landing" a plane on a desired plane master would require taking into account every bit of how it's being seen, would inherently break this effect.
Ok so we need to manually edit planes based off "z layer" (IE: what layer of a z stack are you on).
That's the key conceit of this pr. Implementing the plane cube, and ensuring planes are always offset properly.
Everything else is just gravy.
About the Plane Cube
Each plane master (except ones that opt out) is copied down by some constant value equal to the max absolute change between the first and the last plane.
We do this based off the max z stack size detected by SSmapping. This is also where updates come from, and where all our updating logic will live.
As mentioned, plane masters can choose to opt out of being mirrored down. In this case, anything that interacts with them assuming that they'll be offset will instead just get back the valid plane value. This works for render targets too, since I had to work them into the system as well.
Plane masters can also be temporarily hidden from the client's screen. This is done as an attempt at optimization, and applies to anything used in niche cases, or planes only used if there's a z layer below you.
About Plane Master Groups
BYOND supports having different "maps" on screen at once (IE: groups of items/turfs/etc)
Plane masters cannot cover 2 maps at once, since their location is determined by their screen_loc.
So we need to maintain a mirror of each plane for every map we have open.
This was quite messy, so I've refactored it (and maps too) to be a bit more modular.
Rather then storing a list of plane masters, we store a list of plane master group datums.
Each datum is in charge of the plane masters for its particular map, both creating them, and managing them.
Like I mentioned, I also refactored map views. Adding a new mapview is now as simple as newing a /atom/movable/screen/map_view, calling generate_view with the appropriate map id, setting things you want to display in its vis_contents, and then calling display_to on it, passing in the mob to show ourselves to.
Much better then the hardcoded pattern we used to use. So much duplicated code man.
Oh and plane master controllers, that system we have that allows for applying filters to sets of plane masters? I've made it use lookups on plane master groups now, rather then hanging references to all impacted planes. This makes logic easier, and prevents the need to manage references and update the controllers.
image
In addition, I've added a debug ui for plane masters.
It allows you to view all of your own plane masters and short descriptions of what they do, alongside tools for editing them and their relays.
It ALSO supports editing someone elses plane masters, AND it supports (in a very fragile and incomplete manner) viewing literally through someone else's eyes, including their plane masters. This is very useful, because it means you can debug "hey my X is yorked" issues yourself, on live.
In order to accomplish this I have needed to add setters for an ungodly amount of visual impacting vars. Sight flags, eye, see_invis, see_in_dark, etc.
It also comes with an info dump about the ui, and plane masters/relays in general.
Sort of on that note. I've documented everything I know that's niche/useful about our visual effects and rendering system. My hope is this will serve to bring people up to speed on what can be done more quickly, alongside making my sin here less horrible.
See https://github.com/LemonInTheDark/tgstation/blob/multiz-hell/.github/guides/VISUALS.md.
"Landing" planes
Ok so I've explained the backend, but how do we actually land planes properly?
Most of the time this is really simple. When a plane var is set, we need to provide some spokesperson for the appearance's z level. We can use this to derive their z layer, and thus what offset to use.
This is just a lot of gruntwork, but it's occasionally more complex.
Sometimes we need to cache a list of z layer -> effect, and then use that.
Also a LOT of updating on z move. So much z move shit.
Oh. and in order to make byond darkness work properly, I needed to add SEE_BLACKNESS to all sight flags.
This draws darkness to plane 0, which means I'm able to relay it around and draw it on different z layers as is possible. fun darkness ripple effects incoming someday
I also need to update mob overlays on move.
I do this by realiizing their appearances, mutating their plane, and then readding the overlay in the correct order.
The cost of this is currently 3N. I'm convinced this could be improved, but I've not got to it yet.
It can also occasionally cause overlays to corrupt. This is fixed by laying a protective ward of overlays.Copy in the sand, but that spell makes the compiler confused, so I'll have to bully lummy about fixing it at some point.
Behavior changes
We've had to give up on the already broken gateway "see through" effect. Won't work without managing gateway plane masters or something stupid. Not worth it.
So instead we display the other side as a ui element. It's worse, but not that bad.
Because vis_contents no longer flattens planes (most of the time), some uses of it now have interesting behavior.
The main thing that comes to mind is alert popups that display mobs. They can impact the lighting plane.
I don't really care, but it should be fixable, I think, given elbow grease.
Ah and I've cleaned up layers and plane defines to make them a bit easier to read/reason about, at least I think.
Why It's Good For The Game
<visual candy>
Fixes#65800Fixes#68461
Changelog
cl
refactor: Refactored... well a lot really. Map views, anything to do with planes, multiz, a shit ton of rendering stuff. Basically if you see anything off visually report it
admin: VV a mob, and hit View/Edit Planes in the dropdown to steal their view, and modify it as you like. You can do the same to yourself using the Edit/Debug Planes verb
/cl
About The Pull Request
Reorganizes the entire icons/mob folder.
Added the following new subfolders:
nonhuman-player (this was initially just called "antag", but then I realized guardians aren't technically antags)
simplemob
silicon
effects (for bloodstains, fire, etc)
simplemob/held-pets (for exactly that -- I wasn't sure if this should go in inhands instead)
species/monkey
Moves the following stuff:
All human parts moved into species, with moth, lizard, monkey, etc parts moved to corresponding subfolders. Previously, there were some moth parts in mob/species/moth, and others just loose in mob. Other species were similar.
icemoon, lavaland, and jungle folders made into subfolders of simplemob
All AI and silicon stuff, as well as Beepsky et al. into the silicon folder, simplemobs into the simplemob folder, aliens into the nonhuman-player folder, etc.
Split up animal_parts.dmi into two bodyparts.dmi which were put in their respective folders (species/alien and species/monkey)
Code changes:
Filepath changes to account for all of this
Adds a check when performing surgery on monkeys and xenos, because we can no longer assume their limbs are in the same file
Turns some hardcoded statues and showcases that were built into maps into objects instead
Things I'd like to do in the future but cant be assed right now:
Remove primarily-antag sprites from simplemob/mob.dmi (Revenant, Morph, etc.) and put them in the nonhuman-player folder
Split up mutant_bodyparts.dmi into different files for Tizirans, Felinids, monkeys, etc and put them in their own folders. Those may have once been meant primarily for mutated humans but that's now how they're being used right now.
Pre-sort smoothing_groups and canSmoothWith
Without any ruins, these sorts were taking more than 0.6s, and the bulk of the runtime cost of sortTim during init time.
This only happens on init and they are never changed apart from that, so pre-sorts everything and adds a unit test (in the form of #ifdef UNIT_TESTS, because you can't initial a list) to ensure that they are proper.
Keep visibilityChanged() to mapload only for turf/Initialize
Saves about 0.4s worst case scenario (e.g. with no ruins). Very expensive code (175k loop iterations) for 0 side effects.
Space areas now have the fullbright overlay, not the space turfs
Saves about 0.8s worst case scenario. Seems to work fine with starlight.
Remove is_station_level check for window spawners assigning RCD memory.
Saves about 0.3s worst case scenario. The logic for this isn't consistent since neither walls nor floors check this (for performance), plus some minor micro-opts to spawners.
Optimize is_station_level
Doubles in speed, used heavily in /turf/open/floor and in other initialization procs. Bit hard to tell exactly how much is saved, though.
* Removes ComponentInitialize()
Completely removes ComponentInitialize() as a proc, which was called on every single atom in the game, twice in some instances (like new players), over something that can already be done with Initialize().
This is the second attempt at doing this, after the first attempt fell apart for some reason. This time it was way easier though, since storages are no longer a Component.
* update icon blocker added before calling parent
* Update code/game/machinery/porta_turret/portable_turret.dm
Co-authored-by: san7890 <the@san7890.com>
* adds a mapload while I'm here
* moves human mood
* Does some UNRELATED thing to the PR
Co-authored-by: Fikou <23585223+Fikou@users.noreply.github.com>
Co-authored-by: san7890 <the@san7890.com>
Co-authored-by: Fikou <23585223+Fikou@users.noreply.github.com>
You can now open taps on fuel and water tanks, making them leak fuel/water. Leaking fuel will leave fuel trails(credits to Baystation for sprites, sadly I wasn't able to find who made them or the original PR) which can be ignited.
About The Pull Request
This was doing things component really shouldn't be doing, and now all
of its behaviour is contained onto a datum, as it should've been the
whole time
Why It's Good For The CODEBASE
some things just really shouldn't be components, this was made back when DCS was first implemented and just thrown in because it was the new hot thing i guess, but datumized forensics makes far more sense, AND doesn't use GetComponent
TODO:
More thorough testing to make sure nothing broke
Changelog
🆑
refactor: Turned the forensics component into a datum.
/🆑
Ever been bothered by why titanium glass and plastitanium glass do not drop their own shard types? Well this is the perfect PR for you! Titanium and plastitanium glass shards never existed, and it is probably because the person who made glass way back in the day didn't have time to add these shards. Luckily I decided to add them after all this time. Every piece of code created has been carefully considered and copied form other code, so then you know it is good code. Also I added more tags, I looked at the guidelines and found that adding the fix and qol tags probably boosts my pr score so it will get merged.
Someone made a suggestion to me that fixed a problem I've been trying to work around, and now that I've made it so people can set custom decompose times, that made this WAY EASIER.
When most foods decay, they will turn into the generic moldy food sprite you've become accustomed to, without the ants. After 30 seconds, that moldy food will get consumed by ants, leaving only the anthill.
Ants also no longer spawn on lavaland's basalt, by Fikou request.
I found out how emissives work and my first thought was "damn ants should glow that would look sick"
So now they do.
Also, having less than 5u ants in your body will make you not scream, so 0.0001u ants will no longer have that tiny chance of making someone scream for their life.
If an ant pile has a max damage value less than 1, then they won't be able to bite through your shoes. This is the same threshold as the second tier ant icon.
Makes the giant ant a hostile mob with the neutral faction, meaning they will attack anything not in the neutral faction.
This removes code/__DEFINES/misc.dm and moves all the defines to either:
another existing define file
new define file
local .dm file if the define was only used in one file
I also deleted defines that were not being used and added documentation to all of the ones that were moved out of misc.dm
Why was this needed? People were basically using the misc.dm file as a dumpster to toss all their defines into that was creating one giant mess. The defines have been organized into their proper groups and files now.
* Adds a subsystem to handle automated directional movement, replaces all instances of walk_towards with it. Makes meteors and immovable rods not drift in space, and makes immovable rods more destructive. Note, I've opted not to use byond's method of moving towards something, which is effectively Move(src, get_step(src, get_dir(src, target))) as it's cringe and doesn't make a smooth line. I've replaced it with a autoupdating rise over run setup, read the code for more details
* woop forgot the subsystem
* Documentation, contributing.md entry, and some cleanup
* Makes the moveloop datum more oop friendly, sets us up for a lot of conversions
* Converts the curseblob and walk_away() to the subsystem
* Changes the default for override from FALSE to TRUE
* converts walk() over, still need to add a replacement proc for it, but we didn't actually have anything that used the raw proc
* converts the rest of walk_to() over, nearing the end now
* cleans up some errors
* Fully documents everything, fills in some missing movement types, uses the power of oop to make things cleaner, and typepaths longer
* Finishes the contributing.md stuff
* Done
* Fefaults -> Defaults, can you tell I wrote this at 1AM?
* resolves bubblegum issues
* Roh's suggestions
Co-authored-by: Rohesie <rohesie@gmail.com>
* Cleanup
* Hey lemon, did you know that Destroy() lives on datums? ahhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
* Converts over the discrepencies created in my absense
* HAHA FUCK YOU I PAY MY DUES
* Whoops lost some stuff in the merge
* Converts the system from seconds to deciseconds to make dealing with the api more sane
* Some stuff I missed
* Makes movement an inheritable subsystem type, splits the moveloop file into two, one for the subsystem, and one for the datums
* Makes a subsystem that handles directing movers out to other subsystems. It's a bit bad right now, but it's a
good first step. I think I'll move the move loop datum to a lazy var on mobs instead of an assoc list, don't
like lists.
Also makes the movement procs global, I'll move em to the /movement subsystem at some point or something like
that
* Converts the existing uses of the procs over to the new format
* Adds support for subsystem precedence, so a type of A can override type B.
General cleanup, still kinda in debug mode but it's getting better
* I'll admit I'm not too familiar with this, but I think it will work
* Adds starting logic so movement types "pausing" makes any sense
Redoes how waiting is handled to make it based on world.time directly. I don't remember why. I think it's better
this way.
Adds a drifting movement type, moves space drift over to it.
Needs severe work before it's ready, too much info stored and modified on the moving object, see comment
Starts work on making drifting smooth
* Moves almost all space drifting vars over to signals on the movement datum
Properly implements glide size stuff for both the subsystem and the loops. Space drift will be smoother now.
It's not perfect, but it'll work just fine for now
Adds a way to override a client'd mob's glide size mid move, uses it to make entering a spacedrift look right
Adds a way to delay a client move outside of just move_delay, meant to be used for long periods, and setup such
that it doesn't make inputs persist
Adds flags to movement loops, alongside MOVELOOP_OVERRIDE_CLIENT_CONTROL, which blocks client movements while
the loop is firing, and for it's visual delay after
This means you can't exit a space drift until you hit the actual wall. This feels a lot better
Some general logic stuff, move() will return true/false if it succeeded or failed
Adds a stop_loop() proc that's called when a move loop is no longer active
Suck my nuts
* Moves precedence to the loop instead of the subsystem
* Moves drifting into a component, this lets me explictly block input after the move loop ends, so people can't
move the moment they functionally move onto a new tile
This is a bit underdeveloped currently, but that's a problem for another day
Cleans up some uses of move procs, fixes runtimes in metoer and curseblob code
Adds signals for stopping/starting a move loop, sending one for destroy is redundant.
Moves existing event signals from the movable being acted on to the loop itself, makes more sense this way
Makes the move handler return the created loop up the chain so we can register to it
Fixes a logic error in loop contesting code that lead to loops never actually being removed from subsystems
because they didn't know they should be.
Properly changes lifetime from a time to stop, to functionally an amount of moves to complete before stopping
Adds some new signals for pre/post loop process. This is to better tie into components.
I decided I didn't like the idea of tying all functionality to the loops themselves
The loop decides functionally how to move, components or just tied in signals can decide when/when not to move
and can modify properties of the loop
Making a new loop for things like atmos drift, something I'm interested in tackling in the future, seemed silly
* Moves movement procs directly to the subsystem for better namespacing or whatever
* Moves movement packets onto /atom/movable, no longer need the debugging
I've decided to not just put their contents fully onto atom movable, since it makes debugging on live much
harder, can't sdql for them anymore.
Fixes a runtime in meteor code, properly this time
Fixes a logic error in stop_looping
Makes move manager NO_INIT, because well, it doesn't init
* Commits human sin, makes Recover() work properly for movement subsystems
* Fixes immovable rod orbits not always working, they were returning too early in moved and fucking up the var we use to track move count, and thus not sending a signal properly
* Reworks the curseblob to use signals more, and to not use override
* Missed this in the movement ss commit
* Removes override, makes having a higher or equal precedence take its place
* Updates documentation
* Cleans up some unused defines
* Nukes the unused flags option
* Whoops forgot to qdel check
* Removes an unused var I had for client move prevention before I started using a component
* Let's do this properly
* Modernizes meteor code to better match how explosions actually work currently
* Some more cleanup
* Cleans up effect code a little bit
Nukes the effect system's sleep loop, we use movement loops instead
As a part of that, instead of 1 timer per effect spawned, we react to loop failure and make it 1 timer per
effect system
This should reduce the amoumt of slowdown we see after mass lighting break
It's not everything, we're still making a timer per spark effect, but it cuts things down significantly
* Updates explosions to not sleep
* Adds support for modifying a loops delay post process, makes extinguisher code suck less then it does currently, nukes some more sleeps and timer loops
* Converts water tank resin over to move loops rather then sleeps, minor behavior change mind, the cooldown starts on fire rather then on land, but I think that makes more sense anyway
* compile and runtime fix
* Fixes some runtimes, cleans up some code, ensures feature parity when it comes to logging
* Prevents resin foam from space drifting
* Adds support for flags back into the system, I need it for reasons
* Updates move_towards to fix some bugs and resolve some inconsistent behavior, implements a flag that makes a loop's first move start instantly
* Fixes extinguishers not actually transfering any reagents
* Converts sprays to the new system. This does actually minorly change behavior, in that I've changed the order of spray actions from step -> sleep -> wash to step -> wash -> sleep, but I'm not terribly torn up about it because frankly I think it feels better
* Converts grav catapults over to the new system
* Converts trays over to moveloops
* Converts robot streaking to move loops, the other two coming soon
* Compile you won't. Also fixes a behavior issue with oil streaks
* Does directional step_to properly, cleans up the other two streaking types
* Converts step_trigger over, not that it's actually used anywhere. Changes how stoping a move works, you need to explicitly qdel, other the step is just considered to be ignored. This will make life easier later
* Adds a jps movement loop. It's a bit bloaty, id is stupid, but it'll work just fine
* Makes the system support passing in a datum that's just used as extra context for the move. The hope is this makes signalizing things less of an absolute headache
* Begins the conversion of ai movement datums to movement loops
* These two are reasonably simple, only weird thing I'm doing is A: Not allowing target hotswapping, which I hope none is doing, and B: passing the controller into the move loop as extra context so things work properly
* JPS is a bit more complex, partially because the old implementation was a bit weird. 2 major things. 1: I'm dropping what I think was a redundant behavior minimum distance check from the premove bit of logic, since I'm pretty sure it didn't do anything. 2, instead of just stoping the step in an error state like being pulled, we count it against our max move total
* Audit
* Moves most forced movement to the framework, adds some components to make things nicer
* Implements a flag that makes the loop always operate, regardless of precedence and without impacting any other loops
* Moves movement subsystems into the right folder
* Hey potato what if you had two procs that did the same thing and one called the other? Wow it's useless
* Merges slipping and force movement
* Converys conveyors over to the system. It's a bit fragile, but I think it's totally worth it to save the sleep loop
* Precedence -> Priority, cleans up some logic errors, makes priority highest to lowest instead of lowest to highest, straight cleans some code up
* Makes poly and bubbles ignore spacedrift, now that precedence actually functions properly. I'm likely missing cases of this, will deal with it later
* Depression, thy name is linter
* Fixes linter, and hopefully fixes the runtimes in ci too
* Wew
* Sets sprays and extinguishers back to legacy, since people do actually seem to have noticed
* Spelling errors my beloved
Co-authored-by: Kylerace <kylerlumpkin1@gmail.com>
* More detail, moves return descriptions
* Converts transit tubes to the system?
* Adds the glide size modifier. Not honestly sure that this should be default, considering how crummy it makes things look for normal walking, but it's useful as hell here
* Adds a force move in dir template, actual support for fast initial steps (wtf old me) and a helper proc for setting delay
* Cleans up displosal code a bit, I thought about adding it to the system but it would functionally be just 'disposal loops'. Maybe I'll make a template subtype? not sure how I want to handle stuff like this
* Cleans up mob movement a bit
* Let's use the controller's visual delay
* Makes the resin thrower nicer, cries
* Cleans up some comments, replaces an implicit world.icon_size with an explicit one, fixes up a typecheck
* typecache instead of double istype. Can't do much about the !atom/movable, list would be too big I feel
* hhh
* bro wtf
* Documents the why of SS_TICKER
* Puts SSmovement on SS_TICKER. Lets us support tick steps
* Cleans up the charge action. Makes it use moveloops
* Fixes CI? kinda worried that this just got dropped
* Converts disposal pipes to move loops. They stutter a bit more then usual as of now, hoping that's a me thing, if it's not I'ma look at uping the priority of the base subsystem
* Moves the move subsystems off background, puts some on ssticker
* Prevents some things that shouldn't move in space from moving in space
* Documents the general form and usage of the system
* Virgin one vs chad once
Co-authored-by: Kylerace <kylerlumpkin1@gmail.com>
* Removes unneeded check
* Moves appropriate movement subsystems into SS_BACKGROUND. Removes redundant SS_KEEP_TIMINGs
I do want the behavior of SS_TICKER, which at this point is tick based waits, and ignoring overtime when
calculating next fire.
Since honestly, these subsystems should ignore overtime in regards to next fire, the cost of moving A may be
nothing compared to the cost of moving B.
* Makes the MODULUS macro use floor. I knew our coders would never let me down, glad this exists, thanks ninja
Fixes teleporting caused by shitty round() behavior, adds a "you hit your target" case to homing loops
* Converts blood splatters to move loops, that'll do it
Co-authored-by: Rohesie <rohesie@gmail.com>
Co-authored-by: Kylerace <kylerlumpkin1@gmail.com>
* Protects ghosts, bypasses vents & pipes
* hard crit oops
* stops screaming unconcious people
* fixes a copy-paste error
* fixes planes
* *unconcious* people won't get messages.
* I am begging for this to be right
* I hate that it took me 30 seconds to realize
## About The Pull Request
stop forgetting to include mapload, if you don't include it then every single subtype past it by default doesn't include it
for example, `obj/item` didn't include mapload so every single item by default didn't fill in mapload
## Regex used:
procs without args, not even regex
`/Initialize()`
procs with args
`\/Initialize\((?!mapload)((.)*\w)?`
cleanup of things i didn't want to mapload:
`\/datum\/(.)*\/Initialize\(mapload`
One final change I wanted to make to ants was to rework their rather low damage values. While they by no means were ever intended to be a kill-chem, the fact that they only did 25 brute after being injected with 200u was just far too low.
To change this, I've reworked their damage formula, so now you do roughly 32 brute damage with 100u of ants. This scales significantly once you add more ants after that point.
This is still a rather low amount of damage for the amount of u it takes, so to balance that I made the chance for one to vomit out the ants also stun the user, however to balance that balance it will purge anywhere from 5-10u of ants upon doing so.
I have also changed how the debuff works somewhat. While it still does its normal damage over time, I have increased the damage done by the user scratching at themselves, which yielded an average of 100 brute when dumped with 200u ants during testing.
Finally, you can pour ants back onto the ground now, with the amount of ants being poured being directly proportional to the amount of damage they will do. You must pour more than 10 ants for it to appear, and the amount of ants will only change the maximum damage that the resulting caltrop will do, not the minimum damage. There is a hard-cap at a 10 damage maximum, with the minimum always being 0.5. The amount of damage this caltrop does is equal to `ant_volume * 0.2`
Finally to balance this a little more, breeding ants has gone from requiring 6u sugar to 8u sugar, making farming take a little longer.
See title. Also refactors caltrops into a component because they use connect_loc_behalf which requires them to hold the state.
This also fixes COMPONENT_DUPE_SELECTIVE from just outright not working.
connect_loc_behalf doesn't make sense as an element because it tries to hold states. There is also no way to maintain current behaviour and not have the states that it needs.
Due to the fact that it tries to hold states, it means the code itself is a lot more buggy because it's a lot harder to successfully manage these states without runtimes or bugs.
On metastation, there is only 2519 connect_loc_behalf components at roundstart. MrStonedOne has told me that datums take up this much space:
image
If we do the (oversimplified) math, there are only ever 5 variables that'll likely be changed on most connect_loc_behalf components at runtime:
connections,
tracked,
signal_atom,
parent,
signal_procs
This means that on metastation at roundstart, we take up this amount: (24 + 16 * 5) * 2519 = 261.97600 kilobytes
This is not really significant and the benefits of moving this to a component greatly outweighs the memory cost.
(Basically the memory cost is outweighed by the maint cost of tracking down issues with the thing. It's too buggy to be viable longterm basically)
Simply puts species IDs into defines ("lizard" turns into #define SPECIES_LIZARD "lizard"). This does not affect any gameplay, and is purely for making sure future code doesn't go all fucked up because someone accidentally misspells something
I only changed code that was spelt correctly, so if there actually is a typo somewhere, it isn't changed
Converts most spans into span procs. Mostly used regex for this and sorted out any compile time errors afterwards so there could be some bugs.
Was initially going to do defines, but ninja said to make it into a proc, and if there's any overhead, they can easily be changed to defines.
Makes it easier to control the formatting and prevents typos when creating spans as it'll runtime if you misspell instead of silently failing.
Reduces the code you need to write when writing spans, as you don't need to close the span as that's automatically handled by the proc.
(Note from Lemon: This should be converted to defines once we update the minimum version to 514. Didn't do it now because byond pain and such)
* Fixes footprint stacking, replace_decal needed to return parent, and just, didn't. I'm not sure where the fuck
this came from, or even how to test for it, but here you are
* Adds a unit test to prevent regressions on this error in future
* Uses TEST_ASSERT_EQUAL instead of TEST_ASSERT
Thank you moth man
Co-authored-by: Mothblocks <35135081+Mothblocks@users.noreply.github.com>
* Updates a comment to more accurately describe my pain
* maybe fixes it?
Co-authored-by: Mothblocks <35135081+Mothblocks@users.noreply.github.com>
* Adds explosion SFX to the blastcannon and explosive compressor
- Extracts the explosion SFX and screenshake proc from the SSexplosions explosion handling proc and lets the explosive compressor and blastcannon use it.
* Miscellaneous changes
- Adds defines for the internal explosion arglist keys
- Reverses the values of the explosion severity defines
- Changes almost everything that uses `/proc/explosion` to use named arguments
- Removes a whole bunch of argname = 0 in explosion calls.
* Removes named callback arguments.
* Changes the explosion signals to just use the arguments list
Adds a simple framework to let objects respond to explosions occurring inside of them.
Changes a whole bunch of explosions to use the object being exploded as the origin of the explosion rather than the turf the object is on.
Makes the explosive compressor and blastcannon actually use the TTVs they are given.
Adds support for things responding to internal explosions.
Less snowflake code for the explosive compressor and blastcannon calculating bomb range.*
Less confusing explosion severity defines.
Less opaque explosion arguments
*does not guarantee that the solution to letting them actually use the TTV is any less snowflake.
gibup1 and gibdown1 don't exist
items_and_weapons.dmi doesn't have an icon state called his_grace_ascended, in fact nothing does
items_cyborg.dmi doesn't have an icon state called laser, it does however have an icon state called
laser_cyborg
no porta_turret has an icon state with the _unpowered suffix, in fact I'm convinced none of them ever have
LemonInTheDark
