* Yes, all of them.
* Also did a few corrections to redundant New() and broken Destroy() along the way
* Renamed the turf_initializer.initialize() proc to InitializeTurf to avoid confusion.
* Subsumed /area/proc/initialize into /atom/proc/initialize() - Made /area's LateInitialize to get same behavior as before.
The initialize() routines of HE pipes, vents an scrubbers need to be atmos_init() after all.
If you register yourself with radio controller you need to de-register yourself too.
* to_chat() replacement.
* Revert calling target.init_dir() before connecting.
* This change was added in https://github.com/PolarisSS13/Polaris/pull/3775 to counteract `dir` not being set prior to New() for dynamically loaded maps. The root cause was /atom/New() not calling _preloader.load(). Undoing the change now that /atom/New() is fixed.
* The addition of the init_dir() proc itself however, is useful, because there ARE other times some atmos machinery will want to re-initialize its dir, specifically whenever it is rotated.
* init_dir() must be called in the constructor of all atmospherics machines capable of connecting to another. Since it has to happen for ALL machines, lets move that call to /obj/machinery/atmospherics/New()
* Rename /obj/machinery/atmospherics initialize() to atmos_init()
* These days `initialize()` is used to handle general object initialization that is moved outside of New(). The node connection discovery of atmos machinery needs to happen after all that, and so needs to be in a separate proc.
* Make sure to actually call atmos_init during system startup.
Adds toolspeed var, which is a multiplier on how 'fast' the tool works. 0.5 means it goes twice as fast.
Adds usesound var, which determines what sound is used when a tool is being used.
Changes a lot of code to use those two vars instead.
Adds 'ayyy' tools, which are ported from /tg/'s abductor gamemode. They're currently admin only but I might make them obtainable by xenoarch later.
Adds powertools, also from /tg/. CE starts with them in a new toolbelt that spawns in their locker, ported from (you guessed it) /tg/.
Changes welder sprites to look nicer, ported yet again from /tg/. Modified the blue welder slightly so it can be the electric welder sprite.
Adds various sounds from /tg/, for tools and welders.
Takes a pass at updating ATMOSPHERICS to take advantage of the new powernet changes.
Also removes var/on definitions from many atmos machines. Machines generally shouldn't
be doing "on" things if they aren't using power, and most players don't expect a machine
to use power if it isn't "on," so I guess this is fair game.
Also, further refactoring.
Allows atmos machinery efficiency to be adjusted in setup.dm
Limits flow rates when moving gas from a turf to avoid very high pressures being created when they shouldn't be.
Attempts to limit processing when there isn't much gas to be moved, for performance.
Reverts all changes to _gas_mixture.dm
New turf proc: assume_gas(). Maps to air.adjust_gas_temp().
Lots of optimizations to processing, fire, lighting, HasEntered() and
more.
Zones now process all fire data and existance in one go, fire objects
only handle spreading.
Most code has been ported straight so some of it mightn't be ideally
structured for the new gas_mixtures.
Signed-off-by: Mloc-Argent <colmohici@gmail.com>
- Updated pump and volume pump icons
- Reverted air scrubber icon
- Fixed passive gate icon
- Updated pipe_item sprites
- Fixed an oversight in the pipe color check
- Cleaned up the map
- Complete rewrite of pipe rendering code. It now selects icons from a shared cache.
- Manifolds and other devices (pumps, filters, etc.) now match the color of the connected pipes.
- Updated omni devices to use the shared cache.
- Set separate pipe color definitions.
- Cleaned up a lot of pipe code, converting it to absolute paths and removing old commented out code.
- Tweaked t-ray rendering code.
- Tweaked pipe painter.
- Enhanced pipe checking debug command.
- Expanded tank capacity and resprited them.
- Updated pump and volume pump icons
- Reverted air scrubber icon
- Fixed passive gate icon
- Updated pipe_item sprites
- Fixed an oversight in the pipe color check
- Cleaned up the map
- Complete rewrite of pipe rendering code. It now selects icons from a shared cache.
- Manifolds and other devices (pumps, filters, etc.) now match the color of the connected pipes.
- Updated omni devices to use the shared cache.
- Set separate pipe color definitions.
- Cleaned up a lot of pipe code, converting it to absolute paths and removing old commented out code.
- Tweaked t-ray rendering code.
- Tweaked pipe painter.
- Enhanced pipe checking debug command.
- Expanded tank capacity and resprited them.
-New wraith sprites by TankNut!
-Decreased flare duration, again(!)
-Made a based interact proc and changed the updateDialog to call that instead of attack_hand. This caused issues with the APC and getting the power cell out of it. I then changed all machines that had their own defined proc (that was everywhere)
git-svn-id: http://tgstation13.googlecode.com/svn/trunk@5001 316c924e-a436-60f5-8080-3fe189b3f50e
-Atmos delay is now based on active players, to help fight lag for massive player rounds.
-Changed some for(blah in world) loops to use the correct lists.
git-svn-id: http://tgstation13.googlecode.com/svn/trunk@4958 316c924e-a436-60f5-8080-3fe189b3f50e
(Damn it, it took a million hours to do that, and the entire commit log is going to be two words long?!)
git-svn-id: http://tgstation13.googlecode.com/svn/trunk@4804 316c924e-a436-60f5-8080-3fe189b3f50e
- Readded Volume Pumps - now they work as intended and are constructable
- Readded Passive Gates - now they work as intended and are constructable
- Readded Heat Exchangers - now they work as intended and are constructable
- Added Heater - to warm up gasses to 300C
- Adjusted volumes on big tanks and portable pumps to 2000 and 1200 respectably
- Pipe dispensers can produce the readded pieces.
- Pipe construction code updated to compesate for the new items
- New graphics for all of the above - courtesy by Ausops.
git-svn-id: http://tgstation13.googlecode.com/svn/trunk@4785 316c924e-a436-60f5-8080-3fe189b3f50e
All credits to the author for this handy little script.
I Committed the modified python script to tool directory. Although it needs to be in the root folder of your repo to work.
To notice the improved compile times, in dreammaker go to Build > Preferences > and untick "automatically set file_dir for subfolders"
If this commit inteferes with any large projects just revert it, do your thing, then rerun the script. Easy-peasy.
git-svn-id: http://tgstation13.googlecode.com/svn/trunk@4488 316c924e-a436-60f5-8080-3fe189b3f50e
-Redid icons to be more optimized at compile by setting icon = 'icons/folder/icon.dmi' instead of just icon = 'icon.dmi', meaning that Dream Maker doesn't have to search through every single file for every single .dmi. This shouldn't lead to any errors because of how I went about it, plus the fact that Dream Maker would have freaked out if I screwed something up. Also moved around 2 icons that weren't sorted well.
r4146 compile time: 1 minute, 40 seconds
r4147 compile time: 45 seconds
[VGTG]
git-svn-id: http://tgstation13.googlecode.com/svn/trunk@4147 316c924e-a436-60f5-8080-3fe189b3f50e
